Best 8Mm Drill Bit Size
Best results for 8mm drill bit size
Fisch FSF-134893 Drill Bit
$16.28
$22.79
Last update was on: December 14, 2024 1:24 pm
- Optimized spurs insure fast and easy cutting of the wood fibers before the hole is drilled
- Beveled edge leads to clean drilling of the diameter without any deviation
- For use in soft, hard, exotic, veneered and laminated wood, as well as MDF and even acrylic glass
- Set includes 3, 4, 5, 6, 7, 8, 9 and 10 mm in a blister
- suitable for use in drill press
8pcs 200mm Extra Long High-speed Steel Straight Shank Twist Drill Bits Set Tool 4-10mm For Wood Plastic And Aluminum
$15.29
$20.18
Last update was on: December 14, 2024 1:24 pm
- 【extral long length】Bits are about 200mm(about 7.874 inch)long, provides better stability and balance during quick operation to ensure position is intact.
- 【sharp bits】Bits are sharp(customer comment ) which will make the drilling easier and more effortless.
- 【8 sizes】This extra long twist drill bits set has 8pcs in 4mm, 4.2mm, 4.5mm, 5mm, 5.2mm, 6mm, 8mm, 10mmOD.
- 【high-speed steel】These bits are made of high-speed steel for high hardness and durability,more abrasion resistant and durable than other metal materials.
Metric M42 8% Cobalt Twist Drill Bits Set for Stainless Steel and Hard Metal (1mm-10mm/19pcs)
$34.89
$43.61
Last update was on: December 14, 2024 1:24 pm
- Premium M42 8% Cobalt Steel ,68-70 HRC (Rockwell Hardness Scale) ,Usually Give the Best Heat,Wear and Chip Resistance and Long Tool Life.
- 3 Steps Desigh for Cutting through Stainless Steel,Hard Metals,Aluminum,Plastic.
- This Cobalt Drill Bit is Typically Capable of Running Three to Five Times Faster.Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes.
Hurricane M42 Cobalt Drill Bit, 8.00MM, 135 Degree Split Point, Made in the USA
$8.99
$12.95
Last update was on: December 14, 2024 1:24 pm
- M42 Cobalt Steel - 135° Split Point - 2 Flutes, 4 Cutting Edges
- Diameter: 8.00 mm | Overall Length: 117 mm | Flute Length: 75 mm
- Perfect for drilling in acrylic, hardwoods, and all metals
- Will start easily and will not wander
- Faster cutting with less pressure
- Can be easily sharpened, unlike brad point bits
Bosch CO2148 21/64 In. x 4-5/8 In. Cobalt Drill Bit
$5.89
$7.60
Last update was on: December 14, 2024 1:24 pm
- Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF)
- Rigid, thick web design adds stability to bit in tough applications
- Surface hardened to penetrate tough abrasive materials
- Available in jobber length, full shank
- Best used for drilling into light-gauge metal, high-carbon steel, aluminum and ally steel, cast iron, stainless steel and titanium
Yibaision Masonry Drill Bit Set for Concrete Wood Ceramic Tile Metal Glass Plastic Cement Brick, Chrome Plated with Carbide Tips – 8mm 10 Piece(CASE Included)
$15.69
$21.50
Last update was on: December 14, 2024 1:24 pm
- 【MULTIPURPOSE DRILL BIT SET】--- Masonry drill bits set is widely used, it can be installed on charging drills, hand drills and bench drills. Ideal for drilling holes through concrete, ceramic tile, brick, wood, plastic, soft metal, stone, and masonry.
- 【CONVENIENT STORAGE CASE】--- Keeps your carbide drill bit set safe & organized in a rust-free hard plastic container.
- 【HEAVY DUTY MATERIAL】--- The concrete drill bit set are made of solid stainless steel with the carbide tip to prevent bit cracking and provide a longer life, the hardness is higher than the ordinary drill bit.
6 PCS Multi-Material Twist Drill Bit Set – Qibaok Tungsten Carbide Tip for Tile, Concrete, Brick, Glass, Plastic, Wood, Wall Mirror, Ceramic Tile on Concrete, 4mm, 5mm, 6mm,8mm,10mm, 12mm
$6.99
$9.58
Last update was on: December 14, 2024 1:24 pm
- ????【PREMIUM MATERIAL】Carbide with a reinforced head that prevents bit cracking
- Twist drill bit set made of hard and durable alloy, provides a longer life.
- ????【UNIQUE DESIGN】U type slot design with fast drilling dust remove, antiskid triangle handle allows drill bit to be held tightly and stably in power drill.
- ????【WIDE USAGE】Spear pointed design strong tungsten carbide tip can easily penetrate various material like tile, concrete, brick, glass, plastic and wood,etc, and reduces breakout.
QWORK 5 Pcs Set (6, 6, 8, 10, 12mm) Multi-Material Drill Bit Set for Tile,Concrete, Brick, Glass, Plastic and Wood Tungsten Carbide Tip Best for Wall Mirror and Ceramic Tile on Concrete and Brick Wall
$8.99
$13.40
Last update was on: December 14, 2024 1:24 pm
- 1) One drill bit replaces two drill bits (1x glass & tile drill bit + 1x Mansonry drill bit), ideal for drilling fastner holes in bathroom tiles, or wall mirrors. Once it drills through the tile or mirror this drill bit will cope easily with any masonry behind it
- 2) Spear pointed design strong tungsten carbide tip can easily penetrate various material(tile, concrete, brick, glass, plastic and wood,etc) and reduces breakout
QWORK 10 Pcs Set 8mm (5/16") Multi-Material Drill Bit Set for Tile,Concrete, Brick, Glass, Plastic and Wood Tungsten Carbide Tip Best for Wall Mirror and Ceramic Tile on Concrete and Brick Wall
$13.99
$16.51
Last update was on: December 14, 2024 1:24 pm
- 10 Pcs pack of 5/16" (8mm) drill bits. Set comes with durable plastic case for safekeeping.
- Fast and Efficient Drilling: Spear pointed design strong tungsten carbide tip can easily penetrate various material and reduces breakout.
- Cut Perfect Circles Holes: Suitable for glass, tile, wood, ceramic, etc. When drilling hard material (glass, porcelain floor tile), please use water for lubrication.
- Safe and Convenient: U-shape groove allow for effective scraps and heat discharge. Tri-flat on the shanks of drills are constructed for tighter chucking maximizing security for precise holes.
8mm 5/16" Diamond Hole Saw Drill Bit Coated Masonry Tools for Rocks Stone Glass
$15.99
$23.51
Last update was on: December 14, 2024 1:24 pm
- Product Name: Diamond tip masonry bit, Stone cutting bits, Granite hole bit, Drill bits for rocks
- Outside Diameter: 8mm
- Internal Diameter: 5.5mm
- Shank Diameter: 6.5mm
- Drilling Depth: 29mm
- Easy to use, excellent for making clean and accurate hole on stone, granite, marble, tile, rocks
5 Piece Concrete Drill Bit Set, German Material Carbide Masonry Drill Bits for Concrete/Ceramic Tile/Brick/Wall/Plastic/Wood/Glass, Twist Tip Bit Tool by Eaninno (6 6 8 10 12mm)
$7.99
$11.11
Last update was on: December 14, 2024 1:24 pm
- ✔ SIZE & REMINDING -- Masonry drill bits set includes 2* 6mm (1/4"), 1* 8mm (5/16"), 1* 10mm (3/8"), 1* 12mm (1/2"). Please cooling with water and control the speed when drilling, then dry the water or apply the oil to prevent rusting after used.
- ✔ UPGRADED TIP -- This Eaninno concrete drill bit set made of hard and durable Cemented Carbide (German Material, assembled in China) with the Thickened Tip, the hardness is higher than the ordinary drill bit.
Fisch Brad Point Drill Bits (8mm x 117mm) – Premium Drill Bits for Soft, Hard, Veneered and Laminated Wood, MDF and Acrylic Glass – Beveled Edge for Fast, Easy Cutting – FSF-004035 – Made in Austria
$13.31
$17.04
Last update was on: December 14, 2024 1:24 pm
- Optimized spurs insure fast and easy cutting of the wood fibers before the hole is drilled
- Beveled edge leads to a perfect drilling of the diameter without any deviation
- For use in soft, hard, exotic, veneered and laminated wood as well as MDF and even acrylic glass
- Made in Austria
Migiwata 8mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit Kit of 5pcs with Straight Shank to Drill in Stainless Steel Cast Iron and Other Hard Metals
$16.69
$23.87
Last update was on: December 14, 2024 1:24 pm
- COBALT STEEL - Manufactured from M35 grade cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- FOR STAINLESS STEEL - Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Try to adjust the RPM when it fails to penetrate. Suggested RPM is 400.
MOHOO Countersink Drill Bits, 7pcs Woodworking Countersink Drill Bits Set, Woodworking Chamfer High-Speed Steel Countersink Drill Bits for Woodworking 3 4 5 6 7 8 10mm With Hex Key
$8.99
$12.59
Last update was on: December 14, 2024 1:24 pm
- ①TRI-POINTED DESIGN: The countersink drill bits set with tri-cuspid centering that make sure drills will not produce offset, not easy to slip, no bias, good for accurate and fast drilling. The five-edged chamfer design of the countersink drill helps to remove chips from the holes on both sides automatically and quickly.
- ②HIGH CARBON STEEL MATERIAL: Countersink drill bits are made of high carbon steel which offer high hardness, superior cutting power, good abrasion resistance.
QLOUNI 8Pcs 200mm/8” Extra Long Drill Bits Set HSS Twist Bits 4/4.2/4.5/5/5.2/6/8/10mm Round Shank Wood Working Tool
$14.99
$21.74
Last update was on: December 14, 2024 1:24 pm
- [200mm/8'' Long Drill Bit] the right length body provides better stability and balance during quick operation to ensure position is intact, and allows you to access hard to reach areas
- [Titanium Coated HSS] Classic HSS construction with heat treatment, sharp twisted drill bits will make the drilling easier and more effortless, durable and not easy to bend
- [Shank Type] 4/4.2/4.5/5/5.2/6/8/10mm standard round shank twist bit, fits into all power tools more easily and securely
Jashtool Diamond Drill Bits 3 PCS 8mm 5/16 inch Ceramic Diamond Hole Saw Set with Wax Insert Cooling for Ceramic Tile Porcelain Marble Granite Stone Rock Glass
$16.99
$23.11
Last update was on: December 14, 2024 1:24 pm
- DIAMOND DRILL BITS ---- Equipped with Diamond, Which is Hard Enough and Can Be Used for Ceramic, Porcelain, Tile, Granite, Marble, Etc.
- 3 PCS 8MM --- This Drill Bit Set Includes 3 PCS and The Hole Diameter is 8mm (Approx. 5/16 inch).
- COOLING WAX INSIDE --- Wax Are Inserted to The Drill Bit for Cooling and Lubrication, So You Can Drill Holes without Adding Water. Also, Designed with Hole and Groove in the Side of Drill Bit for Removing Stone Chips.
EANINNO 10 Pieces Masonry Drill Bit Set, German Material Carbide Tip Concrete Drill Bits for Ceramic Tile/Pots Holes/Brick/Porcelain Wall/Glass/Wood, Multipurpose Installer Bit Tool, 5 6 8 10 12 mm
$11.99
$14.87
Last update was on: December 14, 2024 1:24 pm
- ✔ 10 PIECE/ SET -- Masonry drill bits 10 PCS per set includes 2 x 5mm (3/16"), 2 x 6mm (1/4"), 2 x 8mm (5/16"), 2 x 10mm (3/8"), 2 x 12mm (1/2") . Please cooling with water and control the speed when drilling, after used please dry and apply oil to delayed service life.
- ✔ UPGRADED TIP -- This Eaninno concrete drill bit set made of hard and durable Cemented Carbide (German Material, assembled in China) with the Thickened Tip, the hardness is higher than the ordinary drill bit.
6PCS Ceramic Tile Drill Bits, Mgtgbao Masonry Drill Bits Set for Glass, Brick, Tile, Concrete, Plastic and Wood Tungsten Carbide Tip for Wall Mirror and Ceramic Tile with size 6, 6, 8, 8,10,12mm.
$8.99
$10.79
Last update was on: December 14, 2024 1:24 pm
- ❶6 pieces fine grade high durable drill bits in 4 different sizes: that is 2 x 6 mm(1/4"), 1 x 8 mm(5/16"), 1 x 10 mm(3/8"), 1 x 12 mm(1/2") fit your different needs
- ❷ High Quality Multi-purpose Drill Bit Set: Tungsten Carbide Tipped for prolonged life and heavy-duty use
- ❸Special Design: U type slot design with fast drilling dust remove, 3-flats shank allows drill bit to be held tightly and stably in power drill.
Freud 8 mm (Dia.) Brad Point Bit with Right Hand Rotation 70mm overall length (BP80070R)
6pcs Titanium Coated Glass Drill Bits Set 4 Cutting Edges Cross Spear Head Drill with Hex Shank for Ceramic Tile Marble Mirror and Glass, 4mm 5mm 6mm 8mm 10mm 12mm
$11.52
$15.67
Last update was on: December 14, 2024 1:24 pm
- [Quality Material] Made of high quality cemented carbide. Good performance, making clean and accurate holes for you. A set of glass drills that are very easy to work with.
- [Superior performance] Small incision resistance,feature drilling stably, fast speed, not breaking the border. Opening neat, smooth, no broken edges, no tremor phenomenon, chip easily.
- [Wide Application] Professional glass and tile drill bits provide smooth and accurate drilling in ceramic tiles, marble, china, mirrors and glass. Cross tip design reduces breakout and the bit features a carbide tip for extended bit life.