Best Dewalt Tool Boxes With Cart
Best results for dewalt tool boxes with cart
DEWALT DWST17814 TSTAK Deep Toolbox with Long Handle,
$31.49
$44.72
Last update was on: November 23, 2024 11:10 am
- Extra large volume for large tools storage
- Top organizer - fixed dividers for organization of drills & bits
- Bi-material handle on top of each unit for easy & comfortable lifting
- Heavy-Duty rust resistant metal latches
- Durable side latches allow unit to be stacked to other tstak modules
Stanley Consumer Tools TV209711 Mobile Work Center
DEWALT DW7440RS Rolling Saw Stand
Last update was on: November 23, 2024 11:10 am
- N/A
- Imported
- Lightweight design weighs only 33lbs. delivers 20% less weight to carry than other competitive mobile stands
- Heavy-duty kickstand allows the stand to balance upright for mobility and storage
- Quick connect stand brackets attach to saw for easy detachment from stand for loading and unloading
- Wide stand base and offset rear legs provide stability and support for material feed control
DEWALT Tough Chest Mobil
DEWALT DW7350 Planer Stand with Integrated Mobile Base
DEWALT DGL573 Lighted Technician’s Tool Bag, 41 Pocket
$55.21
$77.29
Last update was on: November 23, 2024 11:10 am
- LIGHTED TOOL BACKPACK: LED light can be easily directed at work area or into backpack to help identify tools and parts. 3 Levels of light output allow adjustment for wide area illumination or close-up work, light output 39 Lumens max.
- COMFORTABLE TO CARRY: Padded web carrying handles and adjustable shoulder straps and large pads on back for extra comfort.
- DURABLE: Base pad feet to help reduce wear and abrasion.
DEWALT DW735X Two-Speed Thickness Planer Package, 13-Inch
Last update was on: November 23, 2024 11:10 am
- Powerful 15 AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease
- Three knife cutter-head delivers 30% longer knife life, fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine
- Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
- Maximum depth of cut 1/8 inch, depth capacity 6 inches, width capacity 13 inches
DEWALT DW8062B5 4-1/2-Inch by 0.045-Inch Metal and Stainless Cutting Wheel, 7/8-Inch Arbor, 5-Pack
$9.99
$14.19
Last update was on: November 23, 2024 11:10 am
- This are easy to use
- This are highly durable
- This is manufactured in China
- Thin .045-Inch wheel design for fast burr free cutting
- Proprietary aluminum oxide grain combination for aggressive cutting action
- Proprietary material mix ensures durable long life wheels
DEWALT DW735 13-Inch, Two Speed Thickness Planer
Last update was on: November 23, 2024 11:10 am
- Powerful 15-AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease
- Three knife cutter-head delivers 30-percent longer knife life and makes knife change faster and easier
- Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
- Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine
DEWALT DWST08210 Tough System L-Cart Carrier
$166.71
$195.05
Last update was on: November 23, 2024 11:10 am
- Metal carrier with adjustable foldable brackets allow tailored configuration
- Central locking mechanism secures the boxes to the frame
- ToughSystem Cases not included
- Can handle materials up to 260 lbs.
- Work directly from the carrier, without having to detach all storage
- Easily transport tools and materials from one jobsite to the next
DeWalt DWST20800 Mobile Work Center Rolling Workshop
$92.80
$128.06
Last update was on: November 23, 2024 11:10 am
- 4 work levels - top tool box and tray that can be placed on opened up lid , mid Organizer Section, large bottom bin for power tools make it ideal to transport and work from on site
- Single front pull-up latch easily opens up the unit
- Telescopic handle for ergonomic hold and easy maneuvering
- can be lowered for storage
- Side handles allow to conveniently Lift up above step on onto vehicle
- Ball bearing slides for smooth opening even with heavy Loads and heavy duty wheels suitable for rough terrain
DeWalt DWST28001 Structural Foam Water Seal Plastic Tool Box
DEWALT DWX726 Rolling Miter Saw Stand
Last update was on: November 23, 2024 11:10 am
- Wide adjustable infeed and outfeed work supports provide up to 8' of material support
- Easily adjustable mounting rails adapt to nearly any miter saw
- Wide rubber grip wheels provide easy jobsite mobility
- Three-position pneumatic assisted raising and lowering for the ultimate in flexibility and ease of set up
- Durable tubular steel construction allows for a 300-Pound maximum weight capacity
DEWALT DW7451 Compact Table Saw Stand,
$70.97
$98.65
Last update was on: November 23, 2024 11:10 am
- Heavy-Duty tube steel construction provides the strength you need for safe operation
- Upport bar hardware holes for secure fastening of saw to the stand
- Lightweight
- folds flat for easy handling, storage, and transport
- Designed for use with the DW7480 compact job site table saw, Dcs7485 60V table saw and DW745 compact table saw
TOUGHSYSTEM DS Carrier Brackets – PAIR
$23.48
$26.06
Last update was on: November 23, 2024 11:10 am
- Adjustable, foldable brackets to be used with Dewalt Tough System DS Carrier
- This product is manufactured in Israel
- This product meets customer requirement
- Compatible with the DWST08210, DWST08260, and DWST08270
- Not compatible with DWST08240 or DWST0824
DEWALT DPG82-11/DPG82-11CTR Concealer Clear Anti-Fog Dual Mold Safety Goggle
$9.35
$11.50
Last update was on: November 23, 2024 11:10 am
- Elastic Headband
- Imported
- DEWALT tough Coat hard coated lens provides tough protection against scratches
- DEWALT Xtra clear anti-fog lens coating provides tough protection against fogging
- Soft, dual injected rubber conforms to the face to provide a high level protection from dust and debris
- Adjustable, elastic cloth head strap provides a comfortable fit
DEWALT DWX724 Compact Miter Saw Stand
$199.36
$261.16
Last update was on: November 23, 2024 11:10 am
- Universal design works with all brands of miter saws
- Compact design allows easy transport and storage.
- Lightweight aluminum construction (29.8 lbs.) allows for easy transport to and from the jobsite
- 40-Inch beam extends to support up to 10 feet of material and up to 500 lbs.
- Legs provide superior support and fold for easy storage. Extended Tool Height 32 inches,Extended Tool Width 100 inches,Folded Tool Height 8 inches,Folded Tool Width 44 inches
DEWALT DWX723 Heavy Duty Miter Saw Stand
Last update was on: November 23, 2024 11:10 am
- N/A
- Imported
- Universal design works with all brands of miter saws. Extended Tool Width-151 inch. Folded Tool Width-70 inch. Folded Tool Height-6 inch
- Lightweight aluminum construction (35 lbs.) allows for easy transport to and from the jobsite
- 5-1/2-Inch beam extends to support up to 16-Feet of material and up to 500 lbs.
- Miter saw mounting brackets allow easy and secure mounting of miter saw to stand
DEWALT D24000 1.5-Horsepower 10-Inch Wet Tile Saw
$749.00
$891.31
Last update was on: November 23, 2024 11:10 am
- able has rubber top to prevent sliding and slipping
- Only 69 pounds, allowing one person to transport it and set it up
- Huge cutting capacity, 26″ rip and 18 3/8″ diagonally. 4200 rpm
- Plunge feature allows the user to make quick plunge cuts for electrical outlets and A/C registers
- Dual water nozzles can be adjusted for optimal water placement on blade in order to minimize over-spray and mist
- Cantilevering rail/cart system allows for 24-inch ripping capacity (18-inch tile on diagonal)