Best Makita Metal Cutting Blade
Best results for makita metal cutting blade
Makita A-96095 Metal/General Purpose 32T Carbide-Tipped Saw Blade, 5-7/8"
$27.99
$36.11
Amazon.com
Last update was on: November 24, 2024 7:35 pm
- Ultra-thin kerf design provides smoother cuts with less drag on the motor and minimal material loss
- Modified triple chip grind for increased efficiency and life
- Fully hardened steel saw plates are individually hand-hammered for flatness and expertly tensioned for true cuts
- For cutting pipe, angle iron, channel and more
- For use with Makita 5-7/8" Cordless Metal Cutting Saw
Makita A-90532 12-Inch 60-Teeth Dry Ferrous Metal Cutting Saw Blade with 1-Inch Arbor
Norske Tools NCSBP208 5-3/8" x 50T Metal Cutting Saw Blade
$23.99
$29.75
Amazon.com
Last update was on: November 24, 2024 7:35 pm
- 5-3/8 inch x 50 teeth
- High performance cutting of steel roofing, metal siding, steel pipe, steel studs and more
- 0° hook angle reduces overfeeding, jamming, tooth breakage and kickback
- Modified triple chip grind (MTCG) allows for easier cutting
- C6 Micro-grain Carbide tips
Makita 723061-A-5 3-1/2-Inch 18-TPI Metal Cutting Reciprocating Saw Blade
Milwaukee 48-40-4070 5-3/8-Inch 30T Ferrous Metal Blade
Makita A-93859-5 14-Inch Cut-Off Wheel, 5-Pack
$18.78
$21.97
Amazon.com
Last update was on: November 24, 2024 7:35 pm
- 14-Inch diameter by 1/8-Inch thick, 1-Inch arbor Cut-off Wheel
- A36P B.F. General purpose 5 pack
- Aluminum oxide
- Cuts Ferrous metals, Steel, angle iron, brass, bronze, carbon steel, and other metals
- Consistent performance with long life
Makita 5 Pack – 4 Inch Cut Off Wheels For 4" Grinders – Aggressive Cutting For Metal & Stainless Steel – 4" x .045 For M10 x 1.25" Spindle Thread
$10.99
$13.63
Amazon.com
Last update was on: November 24, 2024 7:35 pm
- ✅ 5 Makita Premium 4” Flat Type 1 Cut Off Wheels for Metal & Stainless Steel (INOX) | 4-Inch x .045-Inch x 5/8-Inch | Optimized for Makita 4 Inch Angle Grinders and compatible with All 4” Angle Grinders with standard M10 x 1.25" Spindle Thread
- ✅ Cut 2-3X More than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup
Makita 2 Pack – 4” Turbo Diamond Blades For 4"+ Grinders & Circular Saws – Ultra-Fast Cutting For Concrete, Masonry & Brick – 5/8”, 20mm & 7/8” Arbors
$22.99
$25.98
Amazon.com
Last update was on: November 24, 2024 7:35 pm
- ✅ 2 Makita 4” Premium Turbo Diamond Blades For General Concrete, Cinder Block & Brick Applications | 4" x .79 x 7/8-Inch Arbor, Optimized for Makita 4” & 4.5" Angle Grinders and compatible with All 4” & 4.5" Angle Grinders with 5/8", 20mm & 7/8" Arbors
- ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry
Makita B-10849-5 14-Inch Cut-Off Wheel, 5-Pack
$19.67
$28.52
Amazon.com
Last update was on: November 24, 2024 7:35 pm
- 14-Inch diameter by 1/8-Inch thick, 1-Inch arbor Cut-off Wheel
- A36P B.F. Premium 5 pack
- Aluminum oxide
- Cuts Ferrous metals, Steel, angle iron, brass, bronze, carbon steel, and other metals
- Consistent performance with long life and fast cutting
Makita 723066-A-25 Metal Cutting Reciprocating Blade, 25-Pack, 6-Inch by 18-TPI
Makita A-95037 TCT Saw Blade 5-3/8-inch by 5/8-inch by 30T
$28.23
$41.50
Amazon.com
Last update was on: November 24, 2024 7:35 pm
- TCT Saw Blade 5-3/8"X5/8"X30T
- Ultra thin-kerf design for lighter cutting load and less wasted material
- Specially designed for cordless saws to permit more cuts per charge
- Individually hand-hammered by skilled saw technicians for guaranteed flatness and proper tension to make the perfect cut
- For use with model #BCS550 18V LXT 5-3/8-in Metal Cutting Saw
Makita 723063-A-5 4-Inch 18-TPI Metal Cutting Reciprocating Saw Blade
Makita 3 Piece – 4.5” Turbo Diamond & Abrasive Blade Set For 4.5”+ Grinders & Saws – Ultra-Fast Cutting For Concrete, Masonry & Metal
$14.99
$20.84
Amazon.com
Last update was on: November 24, 2024 7:35 pm
- ✅ 1 Makita 4.5” Premium Turbo Diamond Blade For FAST 1.25” Depth Concrete, Cinder Block & Brick Cutting + 2 Makita 4.5” Abrasive Metal & Stainless Steel Cut Off Wheels | 4.5” x 7/8” Arbor, Optimized for Makita 4.5”-9” Angle Grinders or Saws and compatible with All 4.5”-9” Angle Grinders or Saws with standard 5/8” arbor
- ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry
Makita A-93681 10-Inch 80 Tooth Micro Polished Mitersaw Blade
$29.11
$32.60
Amazon.com
Last update was on: November 24, 2024 7:35 pm
- Micro-Grain Carbide Teeth are Honed with up to 600 Grit for a Mirror Finish
- Fully Hardened and Expertly Hand Tensioned Steel Saw Plates for True Cuts
- Ultra Thin Kerf .091", 5 Degree Hook Angle, and .071 Plate Thickness
- Fine Crosscutting
- Ideal for: Harwood, Softwood, and Plywood
Makita 5 Pack – 4.5" Cut Off Wheels For Grinders – Aggressive Cutting For Metal & Stainless Steel/INOX – 4-1/2" x .045 x 7/8-Inch | Flat Cutting Wheels
$10.99
$16.05
Amazon.com
Last update was on: November 24, 2024 7:35 pm
- ✅ 5 MAKITA Premium 4-1/2” Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor
- ✅ CUT 2-3X More than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup
Makita LC1230 12-Inch Metal Cutting Saw
Amazon.com
Last update was on: November 24, 2024 7:35 pm
- 4 x faster cutting in light pipe, angle iron, tubing, conduit and channel than abrasive cut-off saws
- Powerful 15 amp motor @ 120 volts. Quick release support fence adjusts 0-45° for miter cutting. Maximum cutting depth of 4-1/2 inch with carbide tipped blade
- D-shape handle for easy gripping
- Long lasting carbide tipped blade for cost efficient, clean and accurate cutting; virtually burr free
- Lock-off button prevents accidental starting
Makita B-57598-5 14" x 1" x 3/32" Abrasive Cut-Off Wheel, 5/Pk
$40.66
$56.11
Amazon.com
Last update was on: November 24, 2024 7:35 pm
- Double reinforced for longer life, less burr and less vibration
- Up to 2 times the life of a 7/64" Thick abrasive wheel
- Up to 20% faster than a 7/64" Thick abrasive wheel
- Designed for cutting heavier gauge metal such as pipe or angle iron
- Special bond improves cutting speed and wheel life
Makita XSC01Z 18-Volt LXT Lithium-Ion 5-3/8-Inch Metal Cutting Saw (Tool Only, No Battery)
$139.95
$197.33
Amazon.com
Last update was on: November 24, 2024 7:35 pm
- Makita-built motor delivers 3,600 RPM for faster cutting in a wide range of metals
- Compact, ergonomic design at 13-3/4" long and weighs only 5.7 lbs. for reduced operator fatigue
- Built-in L.E.D. light illuminates the work area
- Soft grip handle provides increased comfort on the job
- LXT Lithium-Ion battery and Rapid Optimum Charger produces 430% total lifetime work with 3x more cycles
Makita 10 Pack – 4.5" Cut Off Wheels For Grinders – Aggressive Cutting For Metal & Stainless Steel/INOX – 4-1/2" x .045 x 7/8-Inch
Amazon.com
Last update was on: November 24, 2024 7:35 pm
- ✅ 10 MAKITA Premium 4-1/2” Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | Wheel Dimensions: 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders
- ✅ CUT 2-3X MORE than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup
