Best Lunera Led Lighting Fixture.
Best results for lunera led lighting fixture.
HERO-LEDG23D-8W-DW Rotatable PL-S Lamp G23D 2-Pin LED CFL/Compact Fluorescent Lamp Replacement, 8W, 18W Equal, Daylight White 5000K, 4-Pack (Remove/Bypass The Ballast)
$29.99
$44.69
Last update was on: November 23, 2024 12:58 am
- 4Pcs PLC Lamp G23D 2-Pin Base LED CFL Light Replacement Bulb
- 18 Watt Equal 8W Consumption 120 Degree G23D Based Rotatable LED Compact Fluorescent Lamp
- For Use in Recessed/Surface-mounted Downlights, Recessed Cans, Table/Desk Lamps, Portables, Pendant Lamps
- For Use in Ceiling Fixtures, Wall Washers, Wall Sconces, Family Rooms, Living Rooms, Kitchens, Dining Rooms, and Porches
- No Ballast Required (Remove/bypass the ballast), Not dimmable, G23 Daylight White 5000K
Lunera GX23 2-Pin Horizontal CFL LED Dimmable Light Bulb, 5W, 580 Lumen, 3000K CCT, Ballast or Line Driven, 4th Generation, Plug-and-Play 4-Pin Compact Fluorescent Lamp Replacement
Last update was on: November 23, 2024 12:58 am
- PLUG-AND-PLAY INSTALL: Horizontally-mounted LED lamp replaces CFL lamps in just minutes with this low power equivalent - No fixture re-wiring required. A great facility department DIY project
- LINE DRIVEN TOO: This lamp can also be installed by an electrician directly to 120V~277V line voltage for the ultimate in low power. Bypass the ballast and start saving even more
- SAVES UP TO 62% INSTANTLY: Replaces 13W CFLs with a 5W LED with huge instant energy savings
Bonlux 2-Pack 6W LED 2GX7 4-Pin Base PL Lamp 13W CFL/Compact Fluorescent Lamp Replacement 120V Warm White 3000K Single Tube LED PL Horizontal Recessed Bulb (Remove/Bypass The Ballast)
$14.88
$18.90
Last update was on: November 23, 2024 12:58 am
- 2-pack PL Lamp 2GX7 4-Pin Base LED CFL Replacement Bulb
- Warm White 3000K
- 28pcs high brightness 2835 SMD, 6W Consumption, 13W Equal, 180 Degree Beam Angle
- No Ballast Required (Remove/bypass the ballast)
- Low heat, low power consumption, 80% energy-saving
- For Use in Recessed/Surface-mounted Downlights, Recessed Cans, Table/Desk Lamps, Portables, Pendant Lamps, Ceiling Fixtures, Wall Washers, Wall Sconces, Family Rooms, Living Rooms, Kitchens, Dining Rooms, and Porches.
JOMITOP 10 Pairs Tombstone Base Holder Socket Connector with T8 Single Pin FA8 8ft LED Bulb Light Replacement Fluorescent Plunger …
Last update was on: November 23, 2024 12:58 am
- EASY TO USE: These T8 lamp holder socket tombstone are very easy to use. Easy Snap-in or Slide-on Installation, Can Directly Connect with The FA8 Single Pin Light Tube
- 10 Pairs Single Pin FA8 Sockets (without cable) for 10 tubes
- Flameresistant material.
- Max Current 4A
- APPLICATION: Can be widely used , perfect for lighting up your home or office, basement, closet, studio, etc. Hold the lamp tightly. 10 Pairs Tombstone Base Holder Socket
13W G24D 2-Pin PL Retrofit LED Bulbs – Lustaled G24 LED PL-C Horizontal Lamp Daylight PL Fluorescent Tube Lamp G24Q 4 Pin 26W CFL Equivalent for Recessed Cans, 2-Pack (Remove/Bypass The Ballast)
Last update was on: November 23, 2024 12:58 am
- [No Ballast Required]: Remove/bypass the ballast before installation, or it will cause them to flicker or destroy the G24 retrofit PL LED bulb
- [Technical Features]: 13W G24 2-pin LED CFL light replacement bulb, Non-dimmable,Daylight 6000K, AC85-265V input directly
- [Dimension]: Universal g24d 2 pin base (base depth: 21mm/ 0.83inches) suitable for g24d-1, g24d-2, g24d-3 or g24q-1, g24-q2, g24q-3 light fixture
Leviton 26800-4A8 Twist-in Socket for G24q and GX24q Lamp Bases, 4-Pin, 120 W, 600 V, White/Purple
$7.71
$10.79
Last update was on: November 23, 2024 12:58 am
- Allows cost-effective design of smaller, tighter luminaires with compact fluorescent lamps
- Lighting fixtures for retail, commercial and industrial facilities
- For use with universal wattage ballast only
- Eliminates pulling and pushing during lamp insertion that can damage lamps or fixtures
- Easy rotate and lock action speeds up assembly and relamping time
NGTlight 400Watt Metal Halide Equivalent 120W LED Corn Bulb High Bay Parking Lot Light Retrofit E39 Mogul Base 6000K(Daylight) AC100-277V
$74.77
$105.43
Last update was on: November 23, 2024 12:58 am
- Easy to install: Bulb with an E39 mogul screw base, making it a super easy LED retrofit and incandescent/metal-halide replacement. In most cases, just screw in. In others, since LEDs use a driver and not a ballast, you must bypass the ballast (Halide and other bulb types). Consult your electrician.
- LED Lights Factory, all lights are produced by ourselves
- Widely Uesd For High Bay Fixtures,Gyms,Warehouses,Garages,Street,Post Top Fixture,Parking Lot,Shoebox Fixture.Gas Station etc
Hubbell-Bell LTS100S Traditional/Cfl Uses Par 38 Bulb 150-watt Max Weatherproof Lamp Holder, Swivel Joint, Gray
LED PL-L Lamp – 23 Watt – 4-Pin 2G11 40W CFL Equal – 2800 Lumens – 4000 Kelvin – Universal Mount – 120-277V – Ballast Must Be Removed – Direct Replacement for Lunera HN-PLL-L-22-23W-840-G1 – PLT-50159
Sylvania 73366 Ultra HE T8 Led Four Lamp Retrofit Kit Replacing 4-Feet Fluorescent T12 or T8 Lamp, 3500K
Bonlux 2-Pack 6W LED GX23 PL Lamp GX23d 2-Pin Base 13W CFL/Compact Fluorescent Lamp Replacement 120V Warm White Single Tube LED PL Horizontal Recessed Bulb (Remove/Bypass The Ballast)
$14.88
$18.30
Last update was on: November 23, 2024 12:58 am
- No Ballast Required (Remove/bypass the ballast)
- Low heat, low power consumption, energy-saving (can save up to 60%)
- Length: 167mm/ 6.57 inches (confirm correct size needed before ordering)
- 28pcs high brightness 2835 SMD, 6W Consumption, 13W Equal, 180 Degree Beam Angle, Warm White 3000K
- For Use in Recessed/Surface-mounted Downlights, Recessed Cans, Table/Desk Lamps, Portables, Pendant Lamps, Ceiling Fixtures, Wall Washers, Wall Sconces, Family Rooms, Living Rooms, Kitchens, Dining Rooms, and Porches.
JOMITOP 5 Pairs Tombstone Base Holder Socket Connector with T8 Single Pin FA8 8ft LED Bulb Light Replacement Fluorescent Plunger
Last update was on: November 23, 2024 12:58 am
- EASY TO USE: These T8 lamp holder socket tombstone are very easy to use. Easy Snap-in or Slide-on Installation, Can Directly Connect with The FA8 Single Pin Light Tube
- 5 Pairs Single Pin FA8 Sockets (without cable) for 5 tubes
- Flameresistant material.
- Max Current 4A
- APPLICATION: Can be widely used , perfect for lighting up your home or office, basement, closet, studio, etc. Hold the lamp tightly. 10 Pairs Tombstone Base Holder Socket