Best Drill Bit To Cut Stainless Steel
Best results for drill bit to cut stainless steel
Migiwata 4.2mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit Set of 10pcs with Straight Shank to Cut Through Stainless Steel Cast Iron and Other Hard Metals
$11.56
$13.41
Amazon.com
Last update was on: November 23, 2024 10:06 pm
- Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- No center punch is needed—the 135° Quick-Cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander"
ChewSteel Tools Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bits with Straight Shank Set of 13pcs to Cut Through Hard Metals Such as Stainless Steel and Cast Iron
$13.79
$20.41
Amazon.com
Last update was on: November 23, 2024 10:06 pm
- ※ COBALT STEEL - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, extremely heat resistant
- for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- ※ NO CENTER PUNCH NEEDED - The 135° Quick-Cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks. Must be used and operated at proper RPMs for maximum efficiency
CO-Z Step Drill Bits, HSS 5PCS Titanium Step Drill Bit Set, 50 Sizes in 5 High Speed Steel Unibit Drill Bits Set for Sheet Metal with Aluminum Case, Multiple Hole Stepped Up Bits for DIY Lovers
$21.89
$26.71
Amazon.com
Last update was on: November 23, 2024 10:06 pm
- Extreme Durabikity: Cobalt high speed steel drill bits along with the titanium coating ensures extreme durability, will stay new and shiny for years to come.
- Different Sizes of Holes Can Be Drilled: Different sized shanks ensure compatibility with 1/4, 3/8 and 1/2 in. chuck sizes. You are capable to drill holes in different sizes which can meet your normal needs.
- Smooth Drilling: Non-walking drill tip provides fast and smooth drills on steel sheets, aluminum sheets, wood board, plastic board etc. (the board must be smaller in thickness than the height of step drill bits).
set of 3 HSS6542 M2 Steel Spiral Groove Step Drill Bit Set for Stainless Steel Metal Wood Hole
$26.21
$32.76
Amazon.com
Last update was on: November 23, 2024 10:06 pm
- Suit for use in hardness under 28 artifacts,(Such as: Stainless steel , iron plate, aluminum, wood )
- You can use water to cooling it when it is work and it can be used for even longer
- Meet Your Demands - With the step drill bits we offered, you can process different kinds of diameter holes, which greatly saves you a lot of trouble.Great for metal wood plastic countersunk. Suitable for Home DIY, and General Building Engineering Use.
COMOWARE Step Drill Bit Set & Automatic Center Punch- Black and Gold, Double Cutting Blades, High Speed Steel, Short Length Drill Bits Set of 5 pcs, Total 50 Sizes with Aluminum Case
$25.66
$37.72
Amazon.com
Last update was on: November 23, 2024 10:06 pm
- HSS - High Speed Steel Black and Gold, resists corrosion, ensures outstanding durability and sharpness, can reduces the friction, runs cooler.
- Meet Your Demands - With the step drill bits we offered, you can process different kinds of diameter holes, which greatly saves you a lot of trouble.Great for metal/wood/plastic countersunk. Suitable for Home DIY, and General Building/Engineering Use.
- Design - The split point tip is at 118 degrees to increase the wear resistance. The two flute design provides a smoother cutting, allows the material particles escape easily for a much more clean drilling operation.
CO-Z Cobalt Added M35 Step Drill Bit, Spiral Step Drill Bit, Unibit Drill Bit for Cutting Drilling Holes On Stainelss Steel, Steel, Metal Sheet, Multiple Hole Stepped Up Bit for Professionals
$28.00
$36.40
Amazon.com
Last update was on: November 23, 2024 10:06 pm
- DURABLE & STURDY W/COBALT ADDED, solid M35 molybdenum high speed construction with cobalt added for extra durability, close to impossible to snap compared conventional drill bits, the unique 3-sided shank prevents slip in drill chuck and reduces shocks
- oiling the bits recommended before every use to maximize the service life.
- JAM-FREE PERFORMANCE, dual-flute design and three-sided shank design is optimized for cordless drills in high speed provides greater speed and control while minimizing steel scurf flying around, to lengthen service life, please do not set drilling speed at its maximum to avoid damage to the cutting edge.
AUTOTOOLHOME Combination Drill and Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6
$11.89
$14.51
Amazon.com
Last update was on: November 23, 2024 10:06 pm
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel (HSS 4341) vs carbon steel for longer life
- Designed to tap up to 10-gauge metal
Neiko 10182A Titanium Step Drill Bit Set, High Speed Steel | 1/8” to 1/2” | Total 13 Step Sizes
$6.89
$7.99
Amazon.com
Last update was on: November 23, 2024 10:06 pm
- TITANIUM | HIGH SPEED STEEL: classic high speed steel with titanium coating for proven capability and durability in drilling holes in plastic, aluminum, copper, stainless steel and many other types of sheet metal
- 135° SPLIT POINT TIP: increases cutting speed with self-centering and prevents walking
- TWO-FLUTE DESIGN: clears chips faster and allows particles to escape easily
- TRI-FLATTED SHANK: fits into power tools chuck securely and eliminates slip
Metric M42 8% Cobalt Twist Drill Bits Set for Stainless Steel and Hard Metal (1mm-10mm/19pcs)
$34.89
$45.36
Amazon.com
Last update was on: November 23, 2024 10:06 pm
- Premium M42 8% Cobalt Steel ,68-70 HRC (Rockwell Hardness Scale) ,Usually Give the Best Heat,Wear and Chip Resistance and Long Tool Life.
- 3 Steps Desigh for Cutting through Stainless Steel,Hard Metals,Aluminum,Plastic.
- This Cobalt Drill Bit is Typically Capable of Running Three to Five Times Faster.Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes.
COMOWARE Cobalt Drill Bit Set- 13Pcs M35 High Speed Steel Twist Jobber Length for Hardened Metal, Stainless Steel, Cast Iron and Wood Plastic with Metal Indexed Storage Case, 1/16"-1/4"
$13.99
$19.45
Amazon.com
Last update was on: November 23, 2024 10:06 pm
- 13 PIECES INCLUDED: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4".
- HSS WITH 5% COBALT: Durable, Higher Heat & Abrasion Resistance.
- PRECISE 135°SPLIT POINT & TWIST DESIGN: Prevent walking, clear chips and particles faster.
- PROFESSIONAL & WIDELY USE: M35 Cobalt HSS is more suitable for hardened material. Particularly successful in cutting through hard metals such as stainless steel, cast iron, high temperature alloy, titanium alloy, hard plastics and woods, and also can be used for softer materials.
DEWALT DWA1790IR 3-Piece IMPACT READY Step Drill Bit Set
Drill Hog USA 13 Pc COBALT Drill Bit Set Index M42 Drill Bits
Best Choice 8-Piece 1/2” Shank Silver and Deming Drill Bit Set in Aluminum Carry Case, High Speed Steel (HSS) | SAE Size 9/16” – 1” by 1/16th Increment
$26.99
$33.47
Amazon.com
Last update was on: November 23, 2024 10:06 pm
- Premium cobalt high speed steel construction for proven capability and durability to drill holes in wood, plastic, aluminum, copper, stainless, sheet metals and many other types of materials
- Superior gold titanium and black nitride dual coating finish holds up lubricant better for smoother drilling, and is 80% more durable and corrosion resistant than regular black enamel finish
- 135° Split point design at tip increases cutting speed with self-centering feature and prevents drill walking or wobbling
Neiko 10197A Titanium Step Drill Bit Set, High Speed Steel | 5-Piece Set | Total 50 Sizes
$21.98
$24.18
Amazon.com
Last update was on: November 23, 2024 10:06 pm
- Classic high speed steel with titanium coating for proven capability and durability in drilling holes in plastic, aluminum, copper, stainless steel and many other types of sheet metal
- 135° split point and two flute design increases cutting speed with self-centering and prevents walking, clears chips faster and allows particles to escape easily
- Tri flatted shank fits into power tools chuck securely and eliminates slip
21 Pc Cobalt M42 Drill Bit Set 1/16" to 1/2" by 32nds DRILL HOG USA
Irwin Tools3018002 Cobalt M-35 Metal Index Drill Bit Set, 29 Piece
Hymnorq 3/8 Inch Fractional Size M35 Cobalt Steel Twist Drill Bit Set of 5pcs, Jobber Length and Straight Shank, Extremely Heat Resistant, Perfect Drilling in Stainless Steel and Cast Iron
$22.99
$30.12
Amazon.com
Last update was on: November 23, 2024 10:06 pm
- COBALT STEEL - Manufactured from M35 grade cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- FOR METALWORKING - Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate.
COMOWARE Titanium Twist Drill Bit Set – 13 Pcs Hex Shank High Speed Steel for Wood Plastic Aluminum Alloy, 1/16"-1/4"
$9.99
$12.39
Amazon.com
Last update was on: November 23, 2024 10:06 pm
- HSS Titanium Coating - Classic HSS construction with titanium coating for capability and durability. The cutting edge is hardened and honed for sharpness, chatter-free design with staggered cutting teeth ensure the precise countersinking and hole smooth clean.
- Flutes Form - 2 flutes form helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process.
Drill America 29 Piece Heavy Duty High Speed Steel Drill Bit Set with Black and Gold Finish in Round Case (1/16" – 1/2" x 64ths), KFD Series
$61.02
$80.55
Amazon.com
Last update was on: November 23, 2024 10:06 pm
- Assortment of 29 jobber length drill bits includes inch sizes 1/16" to 1/2" in 1/64" increments
- High-speed steel (HSS) provides hardness for wear resistance
- Black and gold oxide finish resists corrosion and increases the hardness of the drill bit
- Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
- Comes in a plastic storage case
Klein Tools KTSB15 Step Drill Bit #15 Double Fluted 7/8 to 1-3/8-Inch
$45.88
$67.44
Amazon.com
Last update was on: November 23, 2024 10:06 pm
- Two flutes cut faster and keep bit cooler
- Fast-starting, non-walking drill tip
- High-visibility silver targets for primary hole sizes
- Thick 3/8-Inch hex shank won't round out in the drill chuck for a more positive grip
- 3 hole sizes
