Best Metal Cutting Drill Bits
Best results for best metal cutting drill bits
COMOWARE Step Drill Bit – Titanium Coated, Double Cutting Blades, High Speed Steel, Short Length Drill Bit, Total 10 Sizes
$9.99
$11.49
Amazon.com
Last update was on: November 24, 2024 5:34 pm
- HSS Titanium Coating - High speed steel along with titanium coating ensures outstanding durability and sharpness, can reduces the friction, runs cooler.
- Meet Your Demands - With the step drill bits we offered, you can process different kinds of diameter holes, which greatly saves you a lot of trouble.Great for steel sheets/ aluminum sheets/ copper/ plastic/ wood board and many other types of sheet metal with ease countersunk. Suitable for Home DIY, and General Building/ Engineering Use.
Viking Drill and Tool 44150 SP-29 Type 240-UB 135 Degree Split Point Magnum Super Premium Jobber Drill Set (29 Piece)
$81.40
$109.89
Amazon.com
Last update was on: November 24, 2024 5:34 pm
- 29 pc. Set Premium High Speed Steel Heavy Duty NAS 907B 135-Degree Split Point
- 135-Degree Split Point, 1/16 - 1/2 by 64ths
- Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance
- Special Hi-Molybdenum tool steel/ Gold Oxide
- NAS 907B Heavy Duty Jobber
CO-Z HSS 5PCS Titanium Spiral Grooved Step Drill Bit Set with Automatic Center Punch, Unibit Drill Bits Set for Sheet Metal with Aluminum Case, Multiple Hole Stepped up Bits for DIY Lovers
$28.99
$35.95
Amazon.com
Last update was on: November 24, 2024 5:34 pm
- DURABLE TITANIUM COATED BITS W/SPIRAL GROOVES, the spiral grooved drill cut more smoothly than straight grooved ones, the drill bit is sharp and can easily drill perfect holes in the metal sheet while the Titanium coating improves durability hence lengthening the service life.
- 50 SIZES IN 5, our bits set includes five standard step drill bits that are capable to drill 50 holes with different diameters, saving you time and efforts
COMOWARE Cobalt Drill Bit Set- 15Pcs M35 High Speed Steel Twist Jobber Length for Hardened Metal, Stainless Steel, Cast Iron and Wood Plastic with Indexed Storage Case, 1/16"-3/8"
$21.99
$29.69
Amazon.com
Last update was on: November 24, 2024 5:34 pm
- HIGH QUALITY MATERIAL: 5% Cobalt High Speed Steel M35 provide extended tool life compared to ordinary drill bits. Durable and strong
- TWIST DESIGN & PERFORMANCE: PRECISE 135°SPLIT POINT, gold oxide finish and round straight shanks. Prevent walking, clear chips and particles faster.Produced by precision fully ground which ensures chips move smoothly.
- PROFESSIONAL & WIDELY USE: M35 Cobalt HSS is more suitable for hardened material. Particularly successful in cutting through hard metals such as stainless steel, cast iron, high temperature alloy, titanium alloy, hard plastics and woods, and also can be used for softer materials.
Best Choice 8-Piece 1/2” Shank Silver and Deming Drill Bit Set in Aluminum Carry Case, High Speed Steel (HSS) | SAE Size 9/16” – 1” by 1/16th Increment
$26.99
$33.47
Amazon.com
Last update was on: November 24, 2024 5:34 pm
- Premium cobalt high speed steel construction for proven capability and durability to drill holes in wood, plastic, aluminum, copper, stainless, sheet metals and many other types of materials
- Superior gold titanium and black nitride dual coating finish holds up lubricant better for smoother drilling, and is 80% more durable and corrosion resistant than regular black enamel finish
- 135° Split point design at tip increases cutting speed with self-centering feature and prevents drill walking or wobbling
IRWIN Metal Countersink Drill Bit Set, 5 Piece, 1877793
$36.41
$51.34
Amazon.com
Last update was on: November 24, 2024 5:34 pm
- Precision ground 82° tip for countersinking most machinable metals, wood, and plastic
- Made from industrial grade high speed steel for increased durability
- Includes a black oxide finish for added corrosion resistance
- Five-flute design reduces vibration for smoother drilling and extended life
- 1/4" round shank fits all handheld and stationary drills
Migiwata Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bits with Straight Shank Set of 13pcs to Cut Through Hard Metals Such as Stainless Steel and Cast Iron
$13.99
$18.75
Amazon.com
Last update was on: November 24, 2024 5:34 pm
- COBALT STEEL - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, extremely heat resistant
- for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- NO CENTER PUNCH NEEDED - The 135° Quick-Cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks. Must be used and operated at proper RPMs for maximum efficiency
3/16-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12
$19.76
$27.86
Amazon.com
Last update was on: November 24, 2024 5:34 pm
- JOBBER LENGTH: 3/16-Inch cutting diameter, 2-5/16-Inch flute length, 3-1/2-Inch overall length, 135 degree split point, 3-flat shank
- MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits
- CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits
COMOWARE Spade Drill Bit Set- Paddle Flat Bits, Hole Cutter, Titanium Coating, Carbon Steel, Woodworking, 6-Pieces, 3/8"-1"
$9.99
$12.69
Amazon.com
Last update was on: November 24, 2024 5:34 pm
- Carbon steel construction with titanium coating for capability and durability. The flat paddle design features a sharp cutting edge, ensures the hole smooth clean.
- Self-centering spade tip for spot-on starts, and the bits evacuate the material as it cuts. Good choice of Hole Cutter.
- The sharp bit allows for accurate drilling to most types of wood, and also fiberglass, PVC (polyvinyl chloride) and soft metals such as aluminum.
Klein Tools KTSB15 Step Drill Bit #15 Double Fluted 7/8 to 1-3/8-Inch
$45.88
$53.22
Amazon.com
Last update was on: November 24, 2024 5:34 pm
- Two flutes cut faster and keep bit cooler
- Fast-starting, non-walking drill tip
- High-visibility silver targets for primary hole sizes
- Thick 3/8-Inch hex shank won't round out in the drill chuck for a more positive grip
- 3 hole sizes
Metric M42 8% Cobalt Twist Drill Bits Set for Stainless Steel and Hard Metal (1mm-10mm/19pcs)
$34.89
$50.59
Amazon.com
Last update was on: November 24, 2024 5:34 pm
- Premium M42 8% Cobalt Steel ,68-70 HRC (Rockwell Hardness Scale) ,Usually Give the Best Heat,Wear and Chip Resistance and Long Tool Life.
- 3 Steps Desigh for Cutting through Stainless Steel,Hard Metals,Aluminum,Plastic.
- This Cobalt Drill Bit is Typically Capable of Running Three to Five Times Faster.Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes.
Hymnorq 3/8 Inch Fractional Size M35 Cobalt Steel Twist Drill Bit Set of 5pcs, Jobber Length and Straight Shank, Extremely Heat Resistant, Perfect Drilling in Stainless Steel and Cast Iron
$22.99
$29.43
Amazon.com
Last update was on: November 24, 2024 5:34 pm
- COBALT STEEL - Manufactured from M35 grade cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- FOR METALWORKING - Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate.
Knoweasy 10 Step Sizes Titanium Step Drill Bit,High Speed Steel 1/4 to 1-3/8 Inches Drill Bits Set for Sheet Metal Hole Drilling
$9.99
$12.99
Amazon.com
Last update was on: November 24, 2024 5:34 pm
- ✅【Includes 10 step sizes:】1/4",3/8",1/2",5/8",3/4",7/8",1",1-1/8", 1-1/4",1-3/8".
- ✅【Application:】Perfect for home repairs and light jobs such as drilling holes in plastic, aluminum, copper, iron sheet and many other types of sheet metal (excluding steel or any other harder metal).
- ✅【High Quality Material:】Made of strong high speed steel with titanium coating, the bits have strong durability.
COMOWARE Titanium Twist Drill Bit Set – 60 Pcs High Speed Steel Jobber Drill Bits for Metal, Steel, Wood, Plastic, Copper, Aluminum Alloy, 3/64"-1/8"
$11.88
$16.87
Amazon.com
Last update was on: November 24, 2024 5:34 pm
- 【HSS TITANIUM COATING】Classic HSS construction with titanium coating for capability and durability. The cutting edge is hardened and honed for sharpness, chatter-free design with staggered cutting teeth ensure the precise countersinking and hole smooth clean. It can be used multiple times without deformation.
- 【TWIST DESIGN & PERFORMANCE】PRECISE 135°SPLIT POINT, gold oxide finish and round straight shanks. Prevent walking, clear chips and particles faster. Produced by precision fully ground which ensures chips move smoothly. It is your ideal choice for DIY projects and household maintenance and repair.
CO-Z Step Drill Bits, HSS 5PCS Titanium Step Drill Bit Set, 50 Sizes in 5 High Speed Steel Unibit Drill Bits Set for Sheet Metal with Aluminum Case, Multiple Hole Stepped Up Bits for DIY Lovers
$21.89
$26.05
Amazon.com
Last update was on: November 24, 2024 5:34 pm
- Extreme Durabikity: Cobalt high speed steel drill bits along with the titanium coating ensures extreme durability, will stay new and shiny for years to come.
- Different Sizes of Holes Can Be Drilled: Different sized shanks ensure compatibility with 1/4, 3/8 and 1/2 in. chuck sizes. You are capable to drill holes in different sizes which can meet your normal needs.
- Smooth Drilling: Non-walking drill tip provides fast and smooth drills on steel sheets, aluminum sheets, wood board, plastic board etc. (the board must be smaller in thickness than the height of step drill bits).
3Pcs High-Speed Steel Step Drill Bit Set, LepoHome Cone Titanium Coated Metal Hole Cutter 1/4" Hex Shank Drive Quick Change 4-12mm/4-20mm/4-32mm
$13.99
$15.95
Amazon.com
Last update was on: November 24, 2024 5:34 pm
- 【Widely Used】Perfect Step Drill Bits suitable for drill holes in various material： within 3mm/0.12 inch (Iron Plate, Copper Plate, Aluminum Plate)
- within 5mm/0.2 inch (Wood, PVC sheet, Insulation Boards). Not suitable for hard and brittle materials such as stainless steel, glass, tile floors, walls etc.
- 【Material】HSS combined with a titanium coating. More capable and durable.
- 【Easy Drilling】Two-Flute Design for smoother cutting. High Step design let you feel the stop and never drill bigger in mistake
DEWALT DWA1789IR 7/8-Inch-1-1/8-Inch IMPACT READY Step Drill Bit
CO-Z Cobalt Added M35 Step Drill Bit, Spiral Step Drill Bit, Unibit Drill Bit for Cutting Drilling Holes On Stainelss Steel, Steel, Metal Sheet, Multiple Hole Stepped Up Bit for Professionals
$28.00
$32.48
Amazon.com
Last update was on: November 24, 2024 5:34 pm
- DURABLE & STURDY W/COBALT ADDED, solid M35 molybdenum high speed construction with cobalt added for extra durability, close to impossible to snap compared conventional drill bits, the unique 3-sided shank prevents slip in drill chuck and reduces shocks
- oiling the bits recommended before every use to maximize the service life.
- JAM-FREE PERFORMANCE, dual-flute design and three-sided shank design is optimized for cordless drills in high speed provides greater speed and control while minimizing steel scurf flying around, to lengthen service life, please do not set drilling speed at its maximum to avoid damage to the cutting edge.
