Best How To Fill A Hpa Tank With An Air Compressor

• Don't take apart the High Pressure Air Filter, because disassemble will let the Water-Oil Separator can not work.
• The filter is made of aviation grade aluminum alloy shell, resistance to high pressure. It works by the physical principles of gas reflux, Variable diameter cooling, vapor condensation.
• Reach 90% effect. of oil and water separation, No consumables, It can be used over and over again
• Compatible with many kinds of air compressors

• Voltage：110v, Frequency：60Hz, Flow Rate：30L/min
• 1cfm, Power：1500w. Working Pressure Service: Normally rated pressure 20Mpa/200bar/3000psi to Max 30Mpa/300bar/4500psi.
• Motor Type: Single phase motor. Max Filling Volume: Less than 1 liter / 68 ci, Filling time: 0.5L container 0-30MPa about 5-10 minutes, 1L container 0-30Mpa about 15-20 minutes.
• Pressure adjustment system with manual shutdown, comes with efficient and reliable safety valve, automatic leaking after full filling until turn it off, cooling way is circulating water cooling, the water tank and pump is separated, drain valve by hand.

• Air compressor power :110V/60HZ
• Working pressure: 310BAR/ 30MPA/ 4500PSI
• High pressure air pump inflating speed: 2800r/min
• Attention : Must replace the oil cap to breathing rod.
• When you add the oil , the oil should be the appropriate place on the edge of the red dot .
• PCP electric pump compressor can be used for Pneumatic Airgun Scuba Rifle PCP Inflator .