Best Diamond Coated Core Drill Bits
Best results for diamond coated core drill bits
BQLZR 4mm Diamond Coated Hole Saw Core Drill Bits Glass Tile Marble Granite Pack Of 10
LDEXIN 2Pcs 32mm/1.26inch Diamond Coated Core Drill Bit Hole Saw Hollow Core Bit Extractor Remover Tools for Glass, Porcelain, Ceramic, Granite (32mm/1.26inch)
$10.49
$15.63
Amazon.com
Last update was on: November 24, 2024 11:05 pm
- 【Super Material】 These diamond drill bits made of high-speed steel with smooth nickel plating surface,durable and have a long sevice life,good performance that excellent for making clean and accurate hole.
- 【Sharp&Smooth Cut】Coated with high quality diamond, the diamond hole saw creates a high precision, smooth cut with no broken edges. Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably
Drilax™ 5 Pcs Diamond Drill Bit Set 3/16", 1/4", 5/16", 3/8", 1/2" – Wet Use for Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic, Porcelain, Bottles, Quartz – Lot 5 Diamond Coated Drills – Kitchen, Bathroom, Shower, Lamps Drilax050513
$10.45
$12.12
Amazon.com
Last update was on: November 24, 2024 11:05 pm
- 5 Mostly Used Sizes: 3/16, 1/4, 5/16, 3/8, 1/2 -High Quality Diamond Drilling Tool Set of
- Over 80% cost savings compared to big box stores. Use with standard electric or battery drillers.
- There is no need for a center pilot drill. These tools do not have center pilot drills.
- Do NOT run dry. These Diamond Coated Tools will work best if you use water to keep the tools cool.
- Shank sizes vary, maximum shank is 1/4 - suitable for all common electric drillers.
Diamond Drill Bits, Baban 10Pcs Hole Saw Diamond Drill Bit Hollow Core Drill Bit Set for Diamond Coating, Carbon Steel for Glass, Ceramics, Porcelain, Ceramic Tile, Marble, 6-32mm
$8.69
$12.60
Amazon.com
Last update was on: November 24, 2024 11:05 pm
- ✔ Satisfied Size - 6mm/0.23", 8mm/0.31", 10mm/0.39", 12mm/0.47", 14mm/0.55", 16mm/0.62", 18mm/0.7", 22mm/0.86", 26mm/1.02", 32mm/1.26"
- ✔ Ideal Application - This diamond coated core drill bit removes a complete circle from glass, marble, tiles,granite, ceramic or other.They are perfect for drill glass, tile bottles,blocks jars, fiberglass porcelain tile ceramic, slate Mable, granite light stone
Drilax Diamond Hole Saw Drill Core Bit Heavy Duty Wet and Dry Use 4 inch for Brick, Concrete Block, Masonry 2 inches Depth of Cut – 3/8 inch Standard Shank DrilaxHD010100
$49.99
$61.49
Amazon.com
Last update was on: November 24, 2024 11:05 pm
- PROFESSIONAL HEAVY DUTY - HIGH QUALITY, DURABLE Diamond Coated Holesaw Tool 2 inches Diameter
- DEPTH of CUT : 2 inches STANDARD 3/8 inch Shank Use with Standard Cordless or Electric Drill
- DRY or WET USE - Drilling Holes in Concrete Block, Brick, Stones, Foundations, Tiles, Glass, Fish Tanks, Marble, Granite Countertop, Ceramic, Porcelain
- SAVE OVER 80 Percent for DIY Projects - Use DRILAX Guide for Precision
Drilax Heavy Duty Wet and Dry Use 2-1/2 inch Diamond Hole Saw Drill Core Bit for Brick, Concrete Block, Masonry 2 inches Depth of Cut – 3/8 inch Standard Shank DrilaxHD010065
$29.99
$42.29
Amazon.com
Last update was on: November 24, 2024 11:05 pm
- PROFESSIONAL HEAVY DUTY - HIGH QUALITY, DURABLE Diamond Coated Holesaw Tool 2-1/2 inches Diameter
- DEPTH of CUT : 2 inches STANDARD 3/8 inch Shank Use with and standard electric or battery drill.
- DRY or WET USE - Drilling Holes in Concrete Block, Brick, Stones, Foundations, Tiles, Glass, Fish Tanks, Marble, Granite Countertop, Ceramic, Porcelain
- SAVE OVER 80 Percent for DIY Projects - USe DRILAX Guide for Precision
Drilax 1 3/4 Inch Diamond Hole Saw Drill Bit Tiles, Glass, Fish Tanks, Marble, Granite Countertop, Ceramic, Porcelain, Coated Core Bits Holesaw DIY Kitchen, Bathroom, Shower, Faucet Installation Size 1 3/4" Inches
$10.99
$14.73
Amazon.com
Last update was on: November 24, 2024 11:05 pm
- HIGH QUALITY, DURABLE Diamond Coated Holesaw Tool inches 1-3/4 inches Diameter
- STANDARD 3/8 inch Shank Use with and standard electric or battery drill.
- PROFESSIONAL Quality Tool for Drilling Holes in Tiles, Glass, Fish Tanks, Marble, Granite Countertop, Ceramic, Porcelain
- SAVE OVER 80 Percent for DIY Kitchen, Bathroom, Shower, Faucet Installation Projects
- Use water as coolant to prolong the tool life, these tools do not need a center pilot drill.
Joiner 2.5mm 3/32" inch Electroplated Diamond Coated Hole Saw Core Drill Bit Masonry Drilling Cutter Glass Marble Tile Granite Pack of 20Pcs
$11.99
$13.67
Amazon.com
Last update was on: November 24, 2024 11:05 pm
- The 2.5mm diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite
- Hole Diameter : 2.5mm (close to 3/32")
- Total length :42mm (1-21/32")
- Drill depth: 3mm depth
- Shank diameter:2.5mm ( close to 3/32")
- Quantity: 20 Pcs
Diamond Core Drill Bits, Set of 6 | DIB-500.00
$37.99
$42.93
Amazon.com
Last update was on: November 24, 2024 11:05 pm
- Great for drilling holes in ceramic, tile, glass and other jewelry components
- Made of stainless steel with electroplated diamond particles
- 6 piece set including 1.5, 2.0, 2.5, 3.0, 5.0, 6.5 millimeters
- 3 millimeter (1/8 inch) shank
- Medium-fine grit
3/32" Diamond Coated Core Drill (2.75mm) – Made In USA
$8.00
$8.88
Amazon.com
Last update was on: November 24, 2024 11:05 pm
- 3/32" Steel Shank - Hole Size Approximately 2.75mm
- Great for cutting 2.75mm holes in stone, glass, wood, tile, and more.
- Coated in 100% Natural Diamond (not synthetic)
- U.S. Made - High Quality - Concentricity Guaranteed
- Works best on a drill press
JOINER 3 mm 1/8" inch Coated Diamond Hole Saw Core Drill Bit Masonry Drilling Cutter for Glass Marble Tile Granite Gemstone Tools Pack of 20Pcs
$11.99
$16.91
Amazon.com
Last update was on: November 24, 2024 11:05 pm
- The 3mm diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
- Hole Diameter : 3mm (close to 1/8")
- Total length : 50mm (close to 2")
- Drill depth: 5mm depth
- Shank diameter:2.35mm ( close to 3/32")
- Drilling speed:Drill a Holes In Seconds
Joiner 6mm 1/4" inch Diamond Hole Saw Core Drill Bit Coated Masonry Drilling Cutter Glass Marble Tile Granite Pack of 20Pcs
$13.99
$18.19
Amazon.com
Last update was on: November 24, 2024 11:05 pm
- The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite
- Hole Diameter: 6mm (close to 1/4")
- Total length: 51mm (2")
- Drill depth: 20mm depth
- Product Name:6mm Diamond tip drill bit, 1/4" inch Glass hole saw bit
- Please add water for coolant
1/16" Diamond Coated Core Drill (2.0mm) – Made In USA
$8.00
$10.32
Amazon.com
Last update was on: November 24, 2024 11:05 pm
- 1/16" Steel Shank - Hole Size Approximately 2.0mm
- Great for cutting 2.0mm holes in stone, glass, wood, tile, and more.
- Coated in 100% Natural Diamond (not synthetic)
- U.S. Made - High Quality - Concentricity Guaranteed
- Works best on a drill press
Toolocity CBKIT1Monster Dry/Wet Diamond Granite/Concrete Core Drill Bits/Hole Saws, 4-Piece
Diamond Coated Core Hole Saw Drill Bit 10pcs for Glass, Ceramics, Porcelain, Ceramic Tile, Marble (2mm)
$9.90
$11.98
Amazon.com
Last update was on: November 24, 2024 11:05 pm
- Diamond Hollow Core Drill along their entire length to allow drilling chips to pass through the drill and minimize clogging. Reduced clogging means faster drilling. Your best choice when drilling metal, glass, and stone. Also used when drilling specimen samples. Nickel plated with industrial diamonds. Shank diameters vary with head diameters.
8mm 5/16" Diamond Hole Saw Drill Bit Coated Masonry Tools for Rocks Stone Glass
$15.99
$18.87
Amazon.com
Last update was on: November 24, 2024 11:05 pm
- Product Name: Diamond tip masonry bit, Stone cutting bits, Granite hole bit, Drill bits for rocks
- Outside Diameter: 8mm
- Internal Diameter: 5.5mm
- Shank Diameter: 6.5mm
- Drilling Depth: 29mm
- Easy to use, excellent for making clean and accurate hole on stone, granite, marble, tile, rocks
Dophee 5Pcs Diamond Coated Core Drill Bits Hole Saw Glass Tile Granite Marble (8mm)
$4.41
$6.48
Amazon.com
Last update was on: November 24, 2024 11:05 pm
- Usage: Excellent for making clean and accurate hole on glass, tile, plastic plate and plank. It can cut tidy, smooth, no broken edges and no tremor phenomenon.
- Small incision resistance, improve the aperture rate. Easy to decorate after grooving, and easily remove the debris.
- Can be used with a electric drill,bench drill,high power grinder, pneumatic drill, magnet drill.
- Always use lubrication (water), otherwise the diamond core drill will burn.
Dry Drill Core Bits for Brick, Concrete Block, Masonry – 2-1/2" Diameter 5/8"-11 Threaded #30/40 Diamond Grit
$55.99
$78.39
Amazon.com
Last update was on: November 24, 2024 11:05 pm
- #30/40 diamond grit for drilling soft brick, soft masonry, concrete block
- Diameter: 2-1/2 inches
- Thread: 5/8"-11 threaded
- Drilling depth: 9.5"
- High diamond concentration and quality guarantee longer coring life, solid poured concrete Not commended
3/8" Diamond Core Drill Bits, 3 Pack for Drilling Cutting Holes in Glass and Tile Fits Your Drill or Drill Press
$18.99
$26.97
Amazon.com
Last update was on: November 24, 2024 11:05 pm
- 3 Pack 3/8" Diamond Core Bit for Glass and Tile
- Fits your hand drill or drill press
- FREE 4 page drilling instruction guide. FREE 5 page decorating ideas guide
- FREE shipping in the US. No risk - 100% money back guarantee
- EASY - Use your kitchen scrubbing sponge to hold the glass and cool the bit. We’ll show you how.
- You’ll make wine bottle lamps, lighted glass block, bird feeders and more
