Best Drilling Through Stainless Steel Drill Bit
Best results for drilling through stainless steel drill bit
Hymnorq 1/8 Inch Fractional Jobber Twist Drill Bit Set of 10pcs, Heat Resistant M35 Cobalt Steel, Fully Ground and Straight Shank, Suitable for Repeated Drilling in Iron and Stainless Steel
$11.89
$13.55
Amazon.com
Last update was on: November 23, 2024 5:52 pm
- HSS-CO MATERIAL - Manufactured from M35 grade cobalt steel, 5% cobalt added to creates a hardened alloy, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- 135° SPLIT POINT - the 135° quick-cut split point are self-centering and able to penetrate metals quickly with less pressure, prevent bits from "walking and wanding". Easy cutting without need of center punch.
1/8-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12
$15.05
$18.21
Amazon.com
Last update was on: November 23, 2024 5:52 pm
- JOBBER LENGTH: 1/8-Inch cutting diameter, 1-5/8-Inch flute length, 2-3/4-Inch overall length, 135 degree split point, straight shank
- MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits
- CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits
set of 3 HSS6542 M2 Steel Spiral Groove Step Drill Bit Set for Stainless Steel Metal Wood Hole
$26.21
$31.98
Amazon.com
Last update was on: November 23, 2024 5:52 pm
- Suit for use in hardness under 28 artifacts,(Such as: Stainless steel , iron plate, aluminum, wood )
- You can use water to cooling it when it is work and it can be used for even longer
- Meet Your Demands - With the step drill bits we offered, you can process different kinds of diameter holes, which greatly saves you a lot of trouble.Great for metal wood plastic countersunk. Suitable for Home DIY, and General Building Engineering Use.
Drill America 7/8" Reduced Shank High Speed Steel Black & Gold KFD Drill Bit with 1/2" Shank, KFD Series
$19.52
$23.81
Amazon.com
Last update was on: November 23, 2024 5:52 pm
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Gold and black surface treated for use in stainless steel and other hard metal drilling
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
CO-Z Step Drill Bits, HSS 5PCS Titanium Step Drill Bit Set, 50 Sizes in 5 High Speed Steel Unibit Drill Bits Set for Sheet Metal with Aluminum Case, Multiple Hole Stepped Up Bits for DIY Lovers
$21.89
$28.89
Amazon.com
Last update was on: November 23, 2024 5:52 pm
- Extreme Durabikity: Cobalt high speed steel drill bits along with the titanium coating ensures extreme durability, will stay new and shiny for years to come.
- Different Sizes of Holes Can Be Drilled: Different sized shanks ensure compatibility with 1/4, 3/8 and 1/2 in. chuck sizes. You are capable to drill holes in different sizes which can meet your normal needs.
- Smooth Drilling: Non-walking drill tip provides fast and smooth drills on steel sheets, aluminum sheets, wood board, plastic board etc. (the board must be smaller in thickness than the height of step drill bits).
ChewSteel Tools Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bits with Straight Shank Set of 13pcs to Cut Through Hard Metals Such as Stainless Steel and Cast Iron
$13.79
$18.62
Amazon.com
Last update was on: November 23, 2024 5:52 pm
- ※ COBALT STEEL - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, extremely heat resistant
- for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- ※ NO CENTER PUNCH NEEDED - The 135° Quick-Cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks. Must be used and operated at proper RPMs for maximum efficiency
Migiwata Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bits with Straight Shank Set of 13pcs to Cut Through Hard Metals Such as Stainless Steel and Cast Iron
$13.99
$17.63
Amazon.com
Last update was on: November 23, 2024 5:52 pm
- COBALT STEEL - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, extremely heat resistant
- for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- NO CENTER PUNCH NEEDED - The 135° Quick-Cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks. Must be used and operated at proper RPMs for maximum efficiency
COMOWARE Cobalt Drill Bit Set- 13Pcs M35 High Speed Steel Twist Jobber Length for Hardened Metal, Stainless Steel, Cast Iron and Wood Plastic with Metal Indexed Storage Case, 1/16"-1/4"
$13.99
$20.29
Amazon.com
Last update was on: November 23, 2024 5:52 pm
- 13 PIECES INCLUDED: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4".
- HSS WITH 5% COBALT: Durable, Higher Heat & Abrasion Resistance.
- PRECISE 135°SPLIT POINT & TWIST DESIGN: Prevent walking, clear chips and particles faster.
- PROFESSIONAL & WIDELY USE: M35 Cobalt HSS is more suitable for hardened material. Particularly successful in cutting through hard metals such as stainless steel, cast iron, high temperature alloy, titanium alloy, hard plastics and woods, and also can be used for softer materials.
Drill America 29 Piece Heavy Duty High Speed Steel Drill Bit Set with Black and Gold Finish in Round Case (1/16" – 1/2" x 64ths), KFD Series
$59.68
$82.36
Amazon.com
Last update was on: November 23, 2024 5:52 pm
- Assortment of 29 jobber length drill bits includes inch sizes 1/16" to 1/2" in 1/64" increments
- High-speed steel (HSS) provides hardness for wear resistance
- Black and gold oxide finish resists corrosion and increases the hardness of the drill bit
- Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
- Comes in a plastic storage case
Best Choice 8-Piece 1/2” Shank Silver and Deming Drill Bit Set in Aluminum Carry Case, High Speed Steel (HSS) | SAE Size 9/16” – 1” by 1/16th Increment
$26.99
$35.09
Amazon.com
Last update was on: November 23, 2024 5:52 pm
- Premium cobalt high speed steel construction for proven capability and durability to drill holes in wood, plastic, aluminum, copper, stainless, sheet metals and many other types of materials
- Superior gold titanium and black nitride dual coating finish holds up lubricant better for smoother drilling, and is 80% more durable and corrosion resistant than regular black enamel finish
- 135° Split point design at tip increases cutting speed with self-centering feature and prevents drill walking or wobbling
Metric M42 8% Cobalt Twist Drill Bits Set for Stainless Steel and Hard Metal (1mm-10mm/19pcs)
$34.89
$40.47
Amazon.com
Last update was on: November 23, 2024 5:52 pm
- Premium M42 8% Cobalt Steel ,68-70 HRC (Rockwell Hardness Scale) ,Usually Give the Best Heat,Wear and Chip Resistance and Long Tool Life.
- 3 Steps Desigh for Cutting through Stainless Steel,Hard Metals,Aluminum,Plastic.
- This Cobalt Drill Bit is Typically Capable of Running Three to Five Times Faster.Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes.
DEWALT DWA1790IR 3-Piece IMPACT READY Step Drill Bit Set
3/16-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12
$19.76
$21.93
Amazon.com
Last update was on: November 23, 2024 5:52 pm
- JOBBER LENGTH: 3/16-Inch cutting diameter, 2-5/16-Inch flute length, 3-1/2-Inch overall length, 135 degree split point, 3-flat shank
- MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits
- CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits
DEWALT DW1361 Titanium Pilot Point Drill Bit Set, 21-Piece
Viking Drill and Tool 44150 SP-29 Type 240-UB 135 Degree Split Point Magnum Super Premium Jobber Drill Set (29 Piece)
$81.39
$102.55
Amazon.com
Last update was on: November 23, 2024 5:52 pm
- 29 pc. Set Premium High Speed Steel Heavy Duty NAS 907B 135-Degree Split Point
- 135-Degree Split Point, 1/16 - 1/2 by 64ths
- Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance
- Special Hi-Molybdenum tool steel/ Gold Oxide
- NAS 907B Heavy Duty Jobber
DEWALT Cobalt Drill Bit Set with Pilot Point, 14-Piece (DWA1240)
21 Pc Cobalt M42 Drill Bit Set 1/16" to 1/2" by 32nds DRILL HOG USA
Bosch CO2135 1/8 In. x 2-3/4 In. Cobalt Drill Bit
$1.65
$2.18
Amazon.com
Last update was on: November 23, 2024 5:52 pm
- Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF)
- Rigid, thick web design adds stability to bit in tough applications
- Surface hardened to penetrate tough abrasive materials
- Available in jobber length, full shank
- Best used for drilling into light-gauge metal, high-carbon steel, aluminum and ally steel, cast iron, stainless steel and titanium
COMOWARE Titanium Twist Drill Bit Set – 13 Pcs Hex Shank High Speed Steel for Wood Plastic Aluminum Alloy, 1/16"-1/4"
$9.99
$12.39
Amazon.com
Last update was on: November 23, 2024 5:52 pm
- HSS Titanium Coating - Classic HSS construction with titanium coating for capability and durability. The cutting edge is hardened and honed for sharpness, chatter-free design with staggered cutting teeth ensure the precise countersinking and hole smooth clean.
- Flutes Form - 2 flutes form helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process.
Champion Cutting Tool Brute Platinum Twister-XL5 29 Piece 1/16"-1/2" x 64ths HSS Jobber Drill Bit Set-135 Deg Split Point, Water Resistant Index-MADE IN USA
$84.99
$93.49
Amazon.com
Last update was on: November 23, 2024 5:52 pm
- Drill 3x Longer (than competitors drills), Drill 2x Faster (than cobalt), Drill Accurate (135 deg split point, tapered web geometry)
- Better than cobalt-XL5 is able to flex when cobalt drills chip or snap
- Premium high speed steel and NOMO surface treatment for longer tool life, fast penetration, and flexibility
- Self centering 135 degree split point prevents drill from walking
- Ultimate workhorse for drilling steel, stainless steel, titanium alloys and other hard to drill materials
