Best Shopsmith Power Tool Woodworking System
Best results for shopsmith power tool woodworking system
PSI Woodworking CUG3418CC Utility Grip 4 Jaw Lathe Chuck System
$99.90
$135.86
Amazon.com
Last update was on: November 25, 2024 9:42 am
- Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi and full size woodworking lathes
- Chuck is pre-threaded to 1" x 8tpi. Includes 3/4" x 16tpi adaptor
- Includes #1 Step Jaws 3/32" to 1-7/8" External & 11/32" to 3-3/8" Internal. Includes #2 Round Jaws 1-1/2" to 3-1/8" External & 2" to 3-7/8" Internal
- Includes Screw Chuck. Also includes an Allen Wrench and a set of Tightening Levers
Oneida Molded DIY Dust Deputy Cyclone
$54.97
$62.12
Amazon.com
Last update was on: November 25, 2024 9:42 am
- INCREASED SUCTION POWER – Oneida Air Systems' Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss!
- LONGER LIFESPAN – Prevents fine dust and large debris from reaching your dust collector, reducing the need for cleanings and prolonging the lifespan of your filter. The Dust Deputy Deluxe will save you countless time and money on expensive replacement vacuum filters and dust bags, allowing you to keep working harder, longer, and safer than ever!
WEN 3962 Two-Speed Band Saw with Stand and Worklight, 10"
$262.99
$318.22
Amazon.com
Last update was on: November 25, 2024 9:42 am
- 3.5 amp motor creates cuts up to six inches deep and 9-3/4 inches wide
- Uses 72-inch blades anywhere from 1/8 to 1/2 inches in size
- Spacious 14-1/8 x 12-1/2 inch work table bevels up to 45 degrees
- Operates at two speeds of either 1520 or 2620 FPM.Dimensions of the stand: 13 3/4 L x 15 3/4 W x 25 1/4H (Inches)
- Includes a 2-year warranty, a work light, a 3-in-1 dust port, a fence, a miter gauge, and a 3/8-inch blade (6 TPI)
Kreg KMS7200 Bandsaw Fence
Amazon.com
Last update was on: November 25, 2024 9:42 am
- Precision lens cursor for pinpoint accuracy and dimensions-mounting rail is 26 inch(660mm) long, fence is 18 inch (457mm) long
- Incredibly strong and rigid for optimal durability and tighter workpieces
- Easy to attach and remove for less downtime and more productivity
- Adjustable in two dimensions for setting parallel with the blade
- Fits most 14-inch band saws for versatility
NOVA 48111 1-Inch 8TPI Direct Thread Precision Midi Wood Turning Chuck
$89.99
$104.39
Amazon.com
Last update was on: November 25, 2024 9:42 am
- Woodworm Screw for fast mounting of rough timbers
- Fast easy two lever operation
- Auto Stop so jaws don't protrude past chuck body
- Fits full range of NOVA Chuck Accessories
- Special Wood turning profile on Jaws to cut into and grip wood fibers firmly
NOVA 9028 Tool Rest Bar 12" / 304mm
PSI Woodworking SPASET Adjustable Angle Modular Bowl Sanding System, NULL
$57.13
$74.27
Amazon.com
Last update was on: November 25, 2024 9:42 am
- Our modular sanding system is lightweight, comfortable, and will speed up and improve your on-lathe sanding results with the interchangeable sanding heads and abrasive discs
- Includes: adjustable sanding handle, (4) sanding heads, (100) hook & loop sanding discs. See manufacturer's description below for details
- Ergonomic, comfortable, adjustable angle, heavy duty, polished metal handle has bearings that allows the sanding head to rotate from the drive of your work piece
PSI Woodworking CJAWFJ2 Jumbo Flat Jaws
Edge Technology Tool Post Drill Chuck
Amazon.com
Last update was on: November 25, 2024 9:42 am
- Precision 1/32"-1/2" keyless drill chuck included.
- Fast and accurate procedure to align drill chuck with spindle.
- Precision alignment pin magnetically held in body cavity for convenience.
- Mounts in any tool post tool holder.
- Body made from high strength aluminum.
Stronghold Jumbo Jaws
Oneida Air Systems Dust Deputy Deluxe Cyclone Separator Kit
$109.97
$134.16
Amazon.com
Last update was on: November 25, 2024 9:42 am
- INCREASED SUCTION POWER – Oneida Air Systems' Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss!
- LONGER LIFESPAN – Prevents fine dust and large debris from reaching your dust filter, reducing the need for cleanings and prolonging the lifespan of your filter. The Dust Deputy Deluxe will save you countless time and money on expensive replacement vacuum filters and dust bags, allowing you to keep working harder, longer, and safer than ever!
PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System
$169.89
$246.34
Amazon.com
Last update was on: November 25, 2024 9:42 am
- Includes four (4) Self-Centering Jaw sets to hold Round and Square Stock for turning, pre-threaded for 1x8tpi, and has an adapter for 3/4x16tpi. spindles
- Includes #1 Step Jaws for dowels: 3/32-to-1-3/8-Inch, Holes: 11/16-to-2-3/8-Inch
- Includes #2 Round Jaws, for dowels: 7/8-to-1-1/2-Inch Holes: 1-1/4-to-2-Inch
- Includes #3 Round Jaws, external grip 3-1/16-to-4-3/8-Inch
- Includes Pin jaws which hold inside holes 1-to-2-1/4-Inch, and a screw chuck
GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG
$59.00
$68.44
Amazon.com
Last update was on: November 25, 2024 9:42 am
- 3-Directional Force for Unmatched Control of the Work piece
- Moving-Blade-Guard Hand Protection
- Precise 1/4" Thin Rips
- The Stabilizing Plate provides 250% more stabilizing surface area. Like a featherboard, it keeps wood locked against the fence for a smooth cut – virtually eliminating binding.
- Virtually Eliminates Kickback
- Work with Small Stock Safely on the Table Saw, Router Table, Jointer, & Band Saw. The 1/8″ Leg fits all existing GRR-RIPPER models
Oneida Molded Deluxe Dust Deputy Kit with 10-Gallon Steel Drum
NOVA 5016 Tailstock Adaptor Chuck Accessory
PSI Woodworking LBUFFSYS 3-Step Lathe Buffing System
$59.95
$74.94
Amazon.com
Last update was on: November 25, 2024 9:42 am
- Set of three 8-Inch fabric buffing wheels
- Tripoli bar, White diamond bar, Carnauba wax bar
- 2 MT heavy duty lathe mandrel which holds the buffing wheels
- The system requires a lathe with a minimum of 1/2HP
- It is recommended that the final piece be pre-treated with Danish Oil
PSI Woodworking CRJA Flat Jaw Extension System
$42.89
$48.89
Amazon.com
Last update was on: November 25, 2024 9:42 am
- Expand the bowl holding capacity of your chuck to 14"
- Compatible with PSI 8" Flat Jaws(CJAWFJ2) or PSI Dedicated Bowl Chuck(LCJC8)
- Made from durable high-density plastic. Bandsaw the jaws to any diameter to adapt to the swing of any Lathe up to a 14"
- CRJA includes (4) jaws with pre-drilled mounting holes, (16) mounting screws, (1) Allen wrench
- Bowl mounting pins not included
Rockler Miter Slot Hardware Kit
Woodturning Tool Sharpening Kit Tormek TNT-708. A Complete Turning Tool Sharpener Kit for Tormek Water Cooled Sharpening Systems.
PSI Woodworking DLGULP Big Gulp Ultimate Wood Lathe Dust Hood
$79.56
$97.06
Amazon.com
Last update was on: November 25, 2024 9:42 am
- Attaches to all lathes - mini or midi even with an extension bed, plus standard size lathes
- Huge 13-by-16-inch hood with a 4-inch intake port to collect your turning chips and dust
- Mounts easily and can be simply positioned for any task
- Moves horizontally with over a 40-inch span without remounting
- A must for every turner
