Best Northern Tool Belt Sander
Best results for northern tool belt sander
JET J-41002 2-Inch by 42-Inch 3/4-Horsepower Bench Belt and 8-Inch Disc Sander
$499.00
$618.76
Amazon.com
Last update was on: November 25, 2024 4:20 am
- Deluxe miter gauge that turns and locks for common angles, 45 degrees both left and right
- Hinged idler wheel cover, tilting table
- Abrasive belt unit does the work of a jig saw, coping saw, or hand file while removing material and finishing
- Allows an operator to get into small openings, plus handle odd shapes and angles
- Grind, sand, or finish large work pieces on the disc unit fast and efficiently, table is slotted to accept miter gauge
Official Replacement Belt Kit for the Work Sharp Knife and Tool Sharpener Ken Onion Edition
$13.50
$16.88
Amazon.com
Last update was on: November 25, 2024 4:20 am
- Replacement abrasive belt assortment for the Ken Onion Edition Work Sharp Knife & Tool Sharpener (WSKTS-KO) only
- Belts are 3/4" x 12" (except 6000 Micro-Mesh, which is 1/2" x 12") and do not fit any other Work Sharp tools or accessories
- Belts included: P120 Extra Coarse Grit - 3/4" x 12" X65 Coarse Grit (P220 equivalent) - 3/4" x 12" X22 Medium Grit (P1000 equivalent) - 3/4" x 12" X4 Fine Grit (P3000 equivalent) - 3/4" x 12" 6000 Extra Fine Grit, 1/2" x 12"
Original 6000 Belt
Work Sharp WSSAKO81119 Medium Grit Belt Kit
$14.99
$17.54
Amazon.com
Last update was on: November 25, 2024 4:20 am
- Kit includes (5) X22 Medium Grit Norton Nora 22 Micron Belts (P1000 equivalent).
- Belts are 3/4" x 12" and ONLY fit the Ken Onion Edition Sharpener and Tool Grinding Attachment.
- These premium grade, engineered abrasives are long lasting and designed for knife & tool sharpening and grinding applications.
- Does not fit WSKTS.
Work Sharp WSSAKO81120 Fine Grit Belt Kit
$15.57
$23.04
Amazon.com
Last update was on: November 25, 2024 4:20 am
- Kit includes (5) X4 Fine Grit Norton Nora 4 Micron Belts (P3000 equivalent).
- Belts are 3/4" x 12" and ONLY fit the Ken Onion Edition Sharpener and Tool Grinding Attachment.
- These premium grade, engineered abrasives are long lasting and designed for knife & tool sharpening and grinding applications.
- Does not fit WSKTS.
JET 98-2202 Infeed/Outfeed Sanding Support Table for 22-44 Plus Only
Freud 1/8" Radius Rounding Over Bit with 1/4" Shank (34-104)
$25.47
$33.88
Amazon.com
Last update was on: November 25, 2024 4:20 am
- N/A
- Imported
- Overall Dia. (D) 3/4", Bearing Dia. 1/2", Carbide Height (h) 1/2", 1/8" Radius, 1/4" Shank
- Cuts all composition materials, plywoods, hardwoods, and softwoods.
- Use on hand-held and table-mounted portable routers.
- Cuts all composition materials, plywoods, hardwoods, and softwoods
Wilton 63185 159V 33-1/2-Inch Tall Pedestal Base
JET 577172 Pedestal Stand for Bench Grinders
$143.58
$157.94
Amazon.com
Last update was on: November 25, 2024 4:20 am
- Heavy-duty cast iron construction provides strength and durability
- Wide stance base gives you a stable grinder workstation
- Coolant tank and tool tray are on an adjustable platform for your convenience
- Compatible with all JET Bench Grinders
Shop Fox W1768 Power Feeder – 1 Hp, 4 Roller, Single-Phase
$1,324.99
$1,921.24
Amazon.com
Last update was on: November 25, 2024 4:20 am
- Motor: 1 HP, 220V, single-phase
- Speeds: (4) 13, 26, 36, 72 FPM
- Wheels: (4) Synthetic rubber,: 2-3/8-Inch W by 4-3/4-Inch D
- Rotation: forward and reverse
- Maximum height of rollers: 7-Inch Vertical movement: 9-Inch Horizontal movement: 17-Inch
JET 708598K JSG-6CS 6-Inch/12-Inch 1-1/2 Horsepower Belt/Disc Sander, 115/230-Volt 1 Phase
$1,499.99
$2,114.99
Amazon.com
Last update was on: November 25, 2024 4:20 am
- Belt operates horizontally, vertically, or at any angle in between
- Quick-change belt tension lever
- Two ground cast-iron tilting tables with miter gauge slots
- Features 1-1/2 hp, 1-phase 115/230-volt motor, pre-wired 115-volt, produces 2,500 sfpm
- Comes standard with back stop for horizontal mode, miter gauge, sanding belt, sanding disc, and 4-inch dust chute
Work Sharp Knife & Tool Sharpener Ken Onion Edition – sharpening angles from 15° to 30°, flexible abrasive belts, variable speed motor, multi-positioning sharpening
$126.99
$184.14
Amazon.com
Last update was on: November 25, 2024 4:20 am
- ADJUSTABLE SHARPENING GUIDE - produce precise edge bevels from 15° to 30°. motor- 120Vac/1.5 amp. Duty cycle-1 hr Continuous
- VARIABLE SPEED MOTOR - handle every sharpening task, from grinding to honing. More power with improved cooling & the option of slow speed honing or high speed grinding
- PREMIUM FLEXIBLE ABRASIVE BELTS - deliver a strong, long lasting razor-sharp convex edge
- FAST, PRECISE, & REPEATABLE - sharpening results with no set up or calibration time. The 6000 grit belt measures ½ x inches) for better contact with Serrations, gut hooks and other hard to reach edges
PORTER-CABLE PCE381K 5.5 Amp 4-1/2" Compact Circular Saw Kit
$73.79
$104.04
Amazon.com
Last update was on: November 25, 2024 4:20 am
- 5.5 Amp compact circular saw, running at 3,500 PRM for power and fast cutting speeds
- Lightweight and compact unit for easy maneuvering
- 1-11/16" depth of cut, cuts 2x material in single pass
- 0-45 degree bevel capacity for variety of cuts
- Dust port with vacuum adapter keeps your work area clean
1/2 hp 1725rpm 56 Frame TEFC (Farm Duty) 115/208-230 volts Leeson Electric Motor # 110086
BOKER 09DX003 Work Sharp Knife & Tool Sharpener
SHOP FOX W1765 1/4 HP Power Feeder
Lisle 13120 Electrical Connector Separator
$10.81
$15.24
Amazon.com
Last update was on: November 25, 2024 4:20 am
- Quickly Disconnects Electrical Connectors Without Damage
- Engage the tool tip behind the connector clip
- Push or pull to disconnect
- The tool is double-ended to fit different access angles
- Works on Weather Pack and other automotive electrical connectors
PlyWheels Plywood Dolly and Drywall Dolly
$21.99
$29.69
Amazon.com
Last update was on: November 25, 2024 4:20 am
- It ain't big, it ain't expensive, it's just right for moving boards that last mile. Over 2000 sold!
- Carries up to 250 lb of ply, drywall, cementboard, glass, metal, or anything that fits into it's slots
- Slots measure 1/2", 3/4", 1", and 1-1/4", large enough for 2 sheets of Drywall!
- Overall dimensions are 6" x 5" x 3", Weighs less than a pound, small enough to hang on your belt or throw in your toolbox.
