Best Rockler Dresser Drawer Hardware

Add stability to your drawer with easy-to-install, screw-on side-mount plastic rails. 285mm (11.2”) long x 8mm (.32”) wide x 16mm (.63”) high.Includes screws.White plastic.

These nail-on drawer glides are pressed or hammered into place for quick yet secure installation, saving wear and tear on drawers. Drawers move smoothly over plastic glides. Made of 3/32″ thick molded plastic. Tan color. Measures 1/2″ deep x 3/8″ high x 3/4″ wide overall. 8 per pack.

Why struggle with a drawer that won’t open or close properly when you can simply replace the slides? Whether you need to replace damaged or missing slides or are installing them new for the first time, Prime-Line R 7210 Drawer Slide Kit fits most bottom/side-mounted drawer systems and is for use in 16” deep drawer cabinets. These bottom mount drawer slides can be installed in drawer cabinets with face frames and without.

The drawer slide kit is constructed of steel tracks with a white powder coated finish, self-lubricating plastic rollers and a self-closing design that commences at the final 2-1/2” from the end of the 15-3/4” long tracks when closing. With a maximum load capacity of 75 lbs., the drawer slide set is sturdy and can hold up to years of repeated use. It features a positive stop in the closed position and a double stop in the extended position that locks your drawer open, so it cannot be pulled too far out and fall off the tracks. Installation is quick and easy, and the kit contains all necessary fasteners. Installation instructions are included and also available on Prime-Line’s website.

Installation Tip: The clearance required between the drawer and the drawer opening for these slides is: 1/2” on left and right sides, 1/4” at the bottom and 5/8” at the top

Note: This kit cannot be cut down to fit smaller drawer depths as it is designed with a positive stop at the ends of the fixed tracks, and because the rear rollers (11/16” diameter wheels) on the sliding tracks are fastened to the ends of the drawer-mounted track pieces.

Product Description

AmazonBasics cabinet drawer slides are made from durable steel and are crafted for consistency to ensure quality and a uniform appearance. Backed with a 1-Year warranty, AmazonBasics cabinet drawer slides are ideal for updating cabinets and replacing worn or damaged slides. All slides have a maximum weight capacity of 100 LBS. Recommended for use on bedroom furniture, sliding cabinet doors, office cabinets and bathroom cabinets. An Amazon Brand.

From the Manufacturer

AmazonBasics

Jackson Palmer designs better tools and equipment based on user suggested improvements. This Premium “No-Mix” case along with a broader selection of quality hardware were our top priorities to create the perfect Hardware Assortment.

The Rockler Universal Drawer Slide Jig is the ultimate aid for installing drawer slides of almost any type, including ball-bearing or epoxy-coated side-mount slides and even center-mount slides! The jig features a locking wedge that holds the slide securely with no risk of slippage. Press the jig against the face of your cabinet and your slide is positioned perfectly level, with the proper setback. The jig can be clamped in place if desired, and it also features an adjustable rod that references off of the face frame rails or cabinet bottom for fast, repeatable height settings.Features:Sliding wedge locks slide securely into the jigAdjustable indexing foot allows perfect repeatabilityFoot can be rotated for use on top or bottomCutouts in jig allow access for drill and driver bitsLarge clamping area so jig can be clamped in placeDurable foamed nylon body with steel indexing rod and ABS footIndexing rod is stored onboard when not in useNot compatible with Blum Tandem Drawer Slides.Note: The maximum drawer slide height that this jig can accommodate is 1-3/4 inch.

Product Description

These classic drawer slides can be adapted to fit most applications. Slides are 22” long but can be cut to length if needed. Cabinet part is usually 1/2″ longer than drawer part, both included. Slide comes undrilled, allowing for customization. 22” length 3/4” thick when both slide parts are assembled. A high tech kiln drying method eliminates warpage ensuring a quality product. Slide parts interlock preventing drawers from tipping fully extended. Made from beech or maple hardwood.

From the Manufacturer

Classic Wood Center Mount Drawer Slide

Not all drawers require traditional slides to operate smoothly. In fact, for many smaller, lightweight drawers these simple tack-in glides may be all you need. They install in seconds, creating a smooth low-friction surface that reduces wear.Hard plastic pads measure 11/16″ x 1/2″ x 3/32” Thick.Manufacturer Part Number: 69609Pack of 10 drawer glides.

Use for drawer front knobs and pulls as well as other applications. Standard #8-32 threading is common for the majority of cabinet knobs and pulls. Truss head design has a flatter profile than a regular round head screw. Zinc plated. 24 per bag.

Product Description

Whether you’re fixing your new dresser drawer that keeps getting stuck or restoring Grandma’s beautiful vintage hutch, these R 7321 Drawer Track Guide and Glides are must-have. These furniture replacement parts can be used on a variety of furniture drawer systems, including dressers, hutches and night stand drawers. They’re quick and easy to install and can save a broken drawer. Made of brown plastic, these R 7321 drawer track guides can fit the Kenlin Rite Trak 1 system. When your favorite dresser or furniture has a broken drawer, don’t toss it, fix it! With quick and easy installation and an inexpensive price tag, you’ll be thrilled with the results. Each kit includes 2 dark-brown, plastic track case guides and 2 track guides, 4 white, plastic corner glides, 8 ring shank nails for nailing in corner glides (3/4″ x 14-1/2 ga.), and 8 Phillips drive, pan head screws for installation of guides (#6 x 5/8″). Please note, a metal track is required with these guides, but is not included.

From the Manufacturer

This drawer guide and glide set is constructed from brown plastic. This set can be used with most furniture drawer systems. Perfect for your dressers, hutches and night stand drawers.