Best Dewalt 18 Volt Xrp Combo Kit
Best results for dewalt 18 volt xrp combo kit
Dewalt DCD771C2 20V MAX Cordless Lithium-Ion 1/2 inch Compact Drill Driver Kit
$99.00
$139.59
Last update was on: November 24, 2024 3:01 pm
- Compact, lightweight design fits into tight areas
- High performance motor delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
- High speed transmission delivers 2 speeds (0-450 & 1,500 rpm) for a range of fastening and drilling applications
- 1/2" single sleeve ratcheting chuck provides tight bit gripping strength
- Ergonomic handle delivers comfort and control
- *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. Battery capacity: 1.3 Ah
DEWALT DCD996B Bare Tool 20V MAX XR Lithium Ion Brushless 3-Speed Hammer Drill (Tool Only)
Last update was on: November 24, 2024 3:01 pm
- High performance transmission for fast application speeds and improved run-time
- High efficiency brushless motor delivers up to 57% more run time over brushed
- 0-38,250 BPM for fast drilling in masonry materials
- 3-Mode LED light with Spotlight mode
- Battery sold separately
- Battery & Charger Sold Separately
DEWALT DCD996P2 20V MAX XR Lithium Ion Brushless 3-Speed Hammer Drill Kit
$299.00
$343.85
Last update was on: November 24, 2024 3:01 pm
- High performance transmission for fast application speeds and improved run-time
- High efficiency brushless motor delivers up to 57% more run time over brushed
- 0-38,250 BPM for fast drilling in masonry materials
- 3-Mode LED light with Spotlight mode
- (2) DCB205 - 20V MAX* XR High Capacity Li-Ion Batteries (5.0Ah)
- *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18
DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch – 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer Kit
Last update was on: November 24, 2024 3:01 pm
- Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints
- Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.
- Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches
- Contact Trip Lock-Off allows trigger to be disabled when not in use. 20-degree angled magazine (up to 120 nail capacity) and will accept DEWALT and most other 20-degree angled finish nails
DEWALT DCD797D2 20V Max XR Tool Connect COMPACT Hammerdrill Kit
Last update was on: November 24, 2024 3:01 pm
- DEWALT Brushless motor delivers up to 75% more runtime vs. 18V NiCad brushed motors
- Program 3 customized RPM settings for precise speed of application
- Integrated blue LED light indicates when your Hammerdrill is paired with your tool connect app
- Last seen feature helps reduce wasted time and money by providing the street address of where the asset was last in range of your tool connect-enabled device
DEWALT DW2166 45 Piece Screwdriving Set with Tough Case
$15.58
$18.85
Last update was on: November 24, 2024 3:01 pm
- Includes the most commonly used screwdriver Accessories
- Optimized fastener fitment on no. 2 Philips bits
- Double-ended 1 in. Bit for extended bit life
- Titanium torsion bits for durability for heavy-duty fastening
- ABS tough case for protection and convenient storage
- Includes 12 double ended bits
DeWalt DC970 Replacement DC9098 18V Compact Battery # N143312
DEWALT DCD950KX 18-Volt XRP 1/2-Inch Drill/Driver/Hammerdrill Kit
Last update was on: November 24, 2024 3:01 pm
- Durable design
- Patented 3 speed all metal transmission
- Heavy duty 1/2" ratcheting chuck
- XRP extended run-time batteries provide long run-time and battery life
- Patented 3-speed all-metal transmission matches the tool to task for fastest application speed and improved run time
- Heavy-duty 1/2-inch self-tightening chuck tightens throughout operation providing superior bit gripping strength
DeWALT DCB107 12V/20V MAX Lithium Ion Charger (Bulk Packed)
DEWALT DCD796D2 20V Max Bl Hammer Drill
$229.00
$290.83
Last update was on: November 24, 2024 3:01 pm
- DEWALT brushless motor which delivers up to 57% more run time
- (2) XR Li-Ion batteries with fuel gauge provide 33% more capacity
- Compact, lightweight design for tight spaces
- High speed transmission with 2-speed settings
- 3-Mode LED lights with a spotlight mode
- *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
DEWALT DCK255X 18-Volt XRP Hammerdrill/Impact Driver Combo Kit
$449.99
$593.99
Last update was on: November 24, 2024 3:01 pm
- Plastic / Metal
- Imported
- DCD950 XRP 18-volt cordless hammerdrill with patented 3-speed all-metal transmission and 1/2-inch self-tightening chuck delivers 450 units watts out of maximum performance.
- DC825 18-volt Impact Driver delivers 1,330 in-lbs of torque and 0-2,400 rpms offering power and speed to perform a wide range of fastening applications at faster speeds
- Provides power and speed to perform a wide range of fastening applications at faster speeds
DEWALT 18v to 20v Adapter – Bare (DCA1820)
DEWALT GIDDS2-298417 20V MAX Lithium-Ion Premium Hammerdrill Kit
Last update was on: November 24, 2024 3:01 pm
- Plastic / Metal
- Made in the USA and Imported
- DEWALT 20V Max XR Premium Lithium Ion batteries offer longer tool runtime & enhanced durability
- 3-speed all-metal transmission matches the tool to task for fastest application speed and improved run time
- Heavy-duty 1/2" metal ratcheting chuck with carbide inserts provides superior bit gripping strength
- LED light with 20 second delay after trigger release
DEWALT DCD997B 20V MAX XR Tool Connect Hammerdrill Kit (Tool Only)
$157.67
$176.59
Last update was on: November 24, 2024 3:01 pm
- Last seen feature
- helps reduce wasted time and money by providing the street address of where your compact drill/driver was last in range of your tool connect-enabled device
- Easily and quickly assign tools to jobsites and users on the tool connect inventory manager software, increasing accountability and reducing lost tools
- Set "Disable when out of range" alerts to help deter unauthorized use or theft
DEWALT DCH273P2 20V Max Brushless SDS Rotary Hammer with 5 Ah Batteries
$469.98
$648.57
Last update was on: November 24, 2024 3:01 pm
- Brushless motor for extended runtime and durability
- Active Vibration Control which significantly reduces vibration
- 2.1 Joules impact energy which provides corded power without the cord
- Retractable utility hook for convenient hanging and storage
- Includes (2) 20v Max 5.0ah batteries
DEWALT DWA2T40IR IMPACT READY FlexTorq Screw Driving Set, 40-Piece
DEWALT DCH273B20v Max Brushless SDS Rotary Hammer(Tool Only)
$229.87
$328.71
Last update was on: November 24, 2024 3:01 pm
- Brushless motor for extended runtime and durability
- Active Vibration Control which significantly reduces vibration
- 2.1 Joules impact energy which provides corded power without the cord
- Retractable utility hook for convenient hanging and storage
- No Load Speed 0 - 1,100 rpm. Optimal Concrete Drilling-5/32 - 1/2 inch. Chuck Type-SDS+. Blows/Min- 0 - 4,600 bpm
- Battery & Charger Sold Separately
DEWALT DCD985B 20-Volt MAX Lithium Ion 1/2-Inch Hammer Drill/Drill Driver(Tool Only)
$149.00
$222.01
Last update was on: November 24, 2024 3:01 pm
- High efficiency motor delivers 450 unit watts out of max power for superior performance
- Also has a LED light with 20 second delay after trigger release - Batteries not included
- Uses DEWALT 20V Max lithium ion batteries which offer longer runtime and enhanced durability
- Heavy-duty 1/2-Inch metal ratcheting chuck with carbide inserts
- Kit includes drill and 360 degree side handle 3-speed all-metal transmission
DEWALT DCD785C2 20V MAX Lithium Ion Compact 1.5 Ah Hammer Drill/Driver Kit
$177.83
$254.30
Last update was on: November 24, 2024 3:01 pm
- N/A
- Made in USA
- Dewalt 20V DCD785C2 Max Lithium Ion Compact Hammer drill Kit 1.5Ah
- *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18
- Compact, lightweight design fits into tight areas
- High speed transmission delivers two-speeds (0-600 and 0-2,000 rpm) for a range of fastening and drilling applications