Best Plasma Cutters With Built In Air Compressor
Best results for plasma cutters with built in air compressor
Lotos LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown
$418.16
$547.79
Amazon.com
Last update was on: November 24, 2024 5:59 pm
- ★ NON-TOUCH PILOT ARC PLASMA CUTTER: efficiently cuts through rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
- ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
PRIMEWELD Premium & Rugged 50A Air Inverter Plasma Cutter Automatic Dual Voltage 110/220VAC 1/2" Clean Cut Portable
$299.00
$442.52
Amazon.com
Last update was on: November 24, 2024 5:59 pm
- THE ULTIMATE PLASMA CUTTER - When precision metalwork cuts matter. As one of our customers said, “It will do the job very well I have had mine for almost three years and it's been very reliable.” Our 50 Amp Digital Air Inverter Plasma Cutter handles cuts up to 1/2" (Max Severance Thickness: 3/4") with ease. Designed for both demanding industrial and construction work, or home and hobby use.
- MAKES THE PRECISION CUTS YOU NEED - With your Prime Weld Plasma Cutter, you can cut stainless steel, alloy steel, mild steel, copper aluminum, and other metal materials without breaking a sweat. Have limited outlets? No problem. The diversity between 110v and 220v has you covered.
Lotos LT5000D Plasma Cutter 50Amps Dual Voltage Compact Metal Cutter 110/220V AC 1/2" Clean Cut
$318.72
$449.40
Amazon.com
Last update was on: November 24, 2024 5:59 pm
- ★ Air PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
- ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
- ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LT5000D Plasma Cutter are "LCS22" or "LCS33". Please search "Lotos LCS22" or "Lotos LCS33"
Hypertherm 088096 Powermax 30 AIR Hand System with 15′ Lead
$1,795.00
$2,207.85
Amazon.com
Last update was on: November 24, 2024 5:59 pm
- Operate it anywhere with the internal air compressor
- Plug into any 120 or 240 V power with Auto-Voltage technology and included plug adapters
- Highly portable. The smallest, lightest weight system in its class
- New AIR T30 torch is rugged and designed to withstand the toughest environments
- Do more in less time. Fast cutting speeds and superior cut quality result in less secondary operations
Bostitch BTFP02012 6 Gallon 150 PSI Oil-Free Compressor
$101.80
$118.09
Amazon.com
Last update was on: November 24, 2024 5:59 pm
- Note:Item does not includes hose or gun kit
- 150 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM* delivered @ 90 PSI pump
- High efficiency motor for easy start up in cold weather
- 78.5 dBA** operational noise level for a quiet work environment
- High flow regulator and couplers to maximize air tool performance
- Long-life oil-free, maintenance-free pump for convenient use
REBOOT Plasma Cutter 50Amps,110/220V Dual Voltage Plasma Cutting Machine Compact Metal Cutter AC 1/2" Clean Cut Inverter Cutting for Home DIY
$305.00
$369.05
Amazon.com
Last update was on: November 24, 2024 5:59 pm
- Automatic 110/220V DC Dual Voltage 50A output 60% Duty Cycle Air Plasma Cutter( no compressor inside)
- On 220V Carbon steel Max Rated Clean Cut Thickness: 1/2"(12mm). Max Severance Thickness: 3/5"(15mm) Under 110V Clean Cut Thickness : 3/8 ‘’(9mm) output current 30A.
- Cutting Material: Stainless steel, Alloy steel, Mild steel, Copper, Cast Iron and Chrome. We Offer 30-Day 100% Satisfaction or Money Back Guarantee and 1 Year Limited Warranty
SUPER DEAL DC Inverter Plasma Cutter Welding Machine With Screen Display Dual Voltage 110/220V AC 1/2” Clean Cut (CUT 50)
$202.99
$253.74
Amazon.com
Last update was on: November 24, 2024 5:59 pm
- 【Superior performance】SUPER DEAL plasma cutter features PRO technology, more stable performance. High duty cycle result in less power consumption. More economical and effcient than the traditional cutting machine due to the high speed, high temperature and high energy plasma draught.
- 【Exquisite workmanship】 Made of heavy duty iron. Its solid material construction makes it reliable and gives it strength that can be used for a long time. It not only can be used in businesses and DIY users, but also fully accommodating the demands of professional operators.
RIDGID 40617 Model 101 Close Quarters Tubing Cutter, 1/4-inch to 1-1/8-inch Tube Cutter
$20.57
$25.30
Amazon.com
Last update was on: November 24, 2024 5:59 pm
- Designed for use in restricted spaces on small diameter hard and soft copper, aluminum, brass and plastic tubing
- Strong, lightweight slide and wheel housing and large knurled feed screw knob ensure easy control of cutting pressure for clean cuts
- Rollers include grooves for close-to-flare cuts
- Tubing cutter has a 1/4-inch to 1-1/8-inch (6 mm to 28 mm) cutting capacity
- Includes spare cutter wheel in knob
Neiko 31112 Air Blow Gun Set with 5 Interchangeable Nozzles and Over-Sized Trigger | 5 Piece Set
$6.99
$9.79
Amazon.com
Last update was on: November 24, 2024 5:59 pm
- A compact and powerful 5” air blower that fits standard air compressors with ¼” tempered thread
- Made of heavy-gauge steel for long service-life with chrome plating that prevents rust and corrosion
- Fits in the palm of your hand with over-sized thumb-controlled PVC coated trigger for precise air control
- Set includes non-marring soft rubber tip, metal tip, inflating needle, 3" narrow and 4" large interchangeable tubes
Hobart 500565 Airforce 27i Plasma Cutter 120/240V
$1,168.99
$1,741.80
Amazon.com
Last update was on: November 24, 2024 5:59 pm
- Multi-Voltage plug (MVP) allows you to connect to 120 V or 240 V power.
- Excels at cutting 3/8 in mild steel, can sever 5/8 in mild steel
- Fan-On-Demand - Runs only when needed reducing dust/debris pulled into unit.
- More precise cut, thinner kerf, less slag to clean up. XT30R torch with 12 ft lead and consumables
- Wind Tunnel Technology - Prevents abrasive dust and particles from damaging internal components.Plasma Material Thickness: 1/4 inches to 3/8 inches
Forney Easy Weld 251 20 P Plasma Cutter
$404.99
$469.79
Amazon.com
Last update was on: November 24, 2024 5:59 pm
- CUTS- Mild steel, aluminum and stainless steel from thin material to 1/4"* (6.35 millimeters) with ease! *(Mild Steel)
- EASY TO USE- All you need is 120 volt power source and 1.5 CFM of compressed air. Built in regulator and air dryer make operation a breeze
- DRAG TORCH TECHNOLOGY- Allows you to drag cutting tip in direct contact with the metal you're cutting for smooth consistent clean cuts
- LIGHT AND PORTABLE- Forney's 120-volt 20 P Plasma Cutter is generator friendly so on the go cutting and moving to different job sites is possible
PrimeWeld Ct520d 50 Amps Plasma Cutter, 200 Amps Tig Welder and 200 Amps Stick Welder Combo
Product Name: Lotos LT3500 35Amp Air Plasma Cutter, 2/5 Inch Clean Cut, 110V/120V Input with Pre Installed NPT Quick Connector, Portable & Easy Quick Setup Metal Cutter
$195.00
$243.75
Amazon.com
Last update was on: November 24, 2024 5:59 pm
- ★ PORTABLE but POWERFUL--the Lotos LT3500 can easily cut up to 2/5”(10 mm) metal with ultimate portability weighing only 18lbs
- The LT3500 is an excellent choice for home DIY jobs and light duty small business projects.
- ★ QUICK Setup--the per installed NPT 1/4” industry type D plug allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The 110V input design allows the machine can easily connected to your existing 110v wall outlet. The whole machine can be setup quickly within 1 mins.
Makita MAC5200 Big Bore 3.0 HP Air Compressor
$372.91
$495.97
Amazon.com
Last update was on: November 24, 2024 5:59 pm
- Cast iron pump with Big Bore cylinder and piston is engineered to provide faster recovery time for improved performance
- Powerful 3.0 HP* motor produces 6.5 CFM at 90 PSI for increased productivity
- Pump is oil-lubricated for cooler running temperatures and reduced wear
- Durable cast iron cylinder reduces wear and increases pump life
- removable for easy maintenance
- Folding handle with low profile design for easy storage with handle folded
Capri Tools 2-Way Air Blow Gun with Adjustable Air Flow and Extended Nozzle
$13.95
$18.97
Amazon.com
Last update was on: November 24, 2024 5:59 pm
- Blow stubborn debris, dust, water, and more off of all kinds of materials and machinery with this powerful air blow gun with 150 maximum PSI
- Control the air flow by turning the flow control knob conveniently located above the handle
- Get to hard to reach areas with the extra-long 4.5 in. nozzle
- Constructed with heavy-duty components and a solid, attractive aluminum frame, and comes equipped with an ergonomic contour soft grip
Lotos LTPDC2000D Non-Touch Pilot Arc Plasma Cutter/Tig/Stick Welder 3 in 1 Combo Welding Machine, Argon Regulator Included, ½ Inch Clean Cut, Brown
$507.84
$670.35
Amazon.com
Last update was on: November 24, 2024 5:59 pm
- ★ NON-TOUCH PLASMA CUTTER: 10-50AMP Plasma Cutter Current Output
- Max Ideal Cut Thickness: 1/2"
- Max Severance Thickness: 3/4"
- Pilot Arc Torch Efficiently Cuts Though Rough, Painted, and Rusty Surfaces and Produces Minimal Slag
- Compact Plasma Cutter Has a Handle for Portability and Uses Non-Hazardous Compressed Air to Cut Stainless Steel, Alloy Steel, Mild steel, Copper, and Aluminum
- ★ TIG WELDER: 15-200AMP DC TIG Electric Current Output
Hyperikon Plasma Cutter, 10 40 Amp, PT 31 LG40 Cutting Torch, 1/2 Inch Clean Cut
$238.95
$279.57
Amazon.com
Last update was on: November 24, 2024 5:59 pm
- ✔ IGBT INVERTER - Built by the latest IGBT inverter technology, the 110V plasma cutter is designed to produce 10-40A adjustable output power with a 45% duty cycle.
- ✔ BUILT IN PROTECTION - With a built-in over-heat protection and insulation class F it ensures safe operation at higher heat tolerance and voltage capacity. The included air regulator controls the air pressure at 75psi. Air compressor is not included.
Ryobi P737 18-Volt ONE+ Portable Cordless Power Inflator for Tires (Battery Not Included, Power Tool Only)
$28.98
$35.07
Amazon.com
Last update was on: November 24, 2024 5:59 pm
- ONE+ COMPATIBLE! This tool runs on the power sources used in Ryobi’s ONE+ battery system, making this purchase extra smart for the Ryobi veteran
- PORTABLE PISTOL PUMPING POWER: Ryobi’s P737 is smaller than most inflators, boasting an ergonomic pistol grip handle for easy use and transport. Keep it in the back of your truck! Strap it to your bicycle!
- SAVE MONEY AND TIME spent on purchasing extra accessories for other portable inflators. The Ryobi P737 boasts TWO high-pressure nozzles, a sports equipment needle, and an ONBOARD PRESSURE GAUGE
Campbell Hausfeld RP410099AV Home Inflation System
$36.74
$52.17
Amazon.com
Last update was on: November 24, 2024 5:59 pm
- Operates on 120-volt household current. 150 Max PSI provides plenty of inflation power
- Built-in pressure gauge for easy and accurate monitoring of air pressure levels when inflating car and bike tires, soccer balls, beach balls and other sporting equipment
- Includes inflator needle and bonus Schrader-to-Presta adapter, allowing the inflator to be used with the Presta valves typically found on racing and road bikes
