Best Diamond Burr Grinder
Best results for diamond burr grinder
YUFUTOL Carbide Burrs Set 10pcs Double Cut Solid Carbide Rotary Burr Set 1/4 Inch Shank for Die Grinder Drill,Metal Carving, Polishing,Engraving,Drilling
Amazon.com
Last update was on: November 23, 2024 12:14 am
- ▸ 10pcs Double Cut Solid Carbide Rotary Burr Set, 1/4 inch shank , fits most die rotary grinders
- ▸ Made of heat-treated carbide which can lasts long working life, sharp and durable
- ▸ Wide Range of uses | include Body Shops, Fabrication Shops, Brake Shops, Industrial Shops, Die Manufacturers.
- ▸ Suitable for all skill levels | this is a essential kit for metalworker& enthusiasts who cleans up weldsor works with metal frequently
5pcs 1/4" Shank Diamond Burr Bits Set for Rotary Tool, 6x8mm Tungsten Carbide Rotary Files for Woodworking / Drilling / Carving / Engraving / Grinding (Single Cut)
SE 82331TF 30-Piece Set of Titanium-Coated Diamond Burrs, Grits 120-150
$7.49
$8.84
Amazon.com
Last update was on: November 23, 2024 12:14 am
- Titanium-coated diamond burrs
- Assorted shapes and sizes include: ball, cone, cylinder, needle point, and tapered
- All burrs with a 1/8" shank - compatible with most die grinders or rotary tools
- A versatile set for numerous projects with grits 120-150
- Highly recommended for crafts, hobbies, home repair, jewelry, lapidary use, modeling, and so much more
YUFUTOL 20pcs Solid Carbide Burr Set 0.118‘’（3mm）shank Tungsten Carbide Rotary Files Burrs with 3mm Cutting Head diameter Fits Most Rotary Drill Die Grinder for Woodworking,Engraving,Drilling,Carving
Amazon.com
Last update was on: November 23, 2024 12:14 am
- 【Quantity】20 pcs Solid Carbide Rotary Burr Set, 0.118 inch shank(3mm) ,approximate 1/8 inch, fits dremel and most small rotary tools
- 【Durable】Whole Piece made of heat-treated solid tungsten carbide that lasts long working life, sharp and sturdy
- 【Target】Suitable for all skill level | this is a essential kit for woodworkers & enthusiasts who cleans up welds or works with metal frequently, easy to grasp and use, safe and reliable
Carbide Burr Set 10pcs, Double Cut Rotary Diamond Carving Tools for Grinder Drill, Metal Polishing, Metal Craving, Engraving, Woodworking (1/8" Shank, 1/4" Head Size)
$9.99
$13.69
Amazon.com
Last update was on: November 23, 2024 12:14 am
- Premium Material: Made of high quality tungsten carbide (10 times higher than the durability of high speed steel cutter). It is anti resistant and high temperature, thicker head size brings high durability.
- Double Cut Design: Double groove of the head are crossed, the head is easy to use, safe and reliable. More suitable for low density object, like: wood, plastic, aluminum, etc.
- Long Lifespan and High Efficiency: Longer service life, basically it can replace a small grinding wheel. The processing efficiency is tens of times higher than the manual file tool without dust pollution.
DerBlue 50-Piece 1/8-Inch Shank Diamond Coated Rotary Burrs Set Fits Dremel Rotary Tools,Diamond Burr Set for Jewelry,Glass,Stone,Ceramic,Gemstones Lapidary (Large Head Style)
$15.99
$20.15
Amazon.com
Last update was on: November 23, 2024 12:14 am
- 50 Assorted Heads,small head style,diamond coated rotary burrs
- Shank Size: 1/8-inch,Grit: 120
- Various shapes included, such as spheres, cylinders, bullets, needles etc.
- Designed for Rotary Tools,Plastic box packaging, easy to store and carry
- Great for Working with Ceramics, Tile, Stone, Glass, Metal & More
YUFUTOL Carbide Burr Set with 1/4”(6.35mm) Shank 8pcs Double Cut Solid Carbide Rotary Burr Set for Die Grinder Drill, Metal Wood Carving, Engraving,Polishing,Drilling
Amazon.com
Last update was on: November 23, 2024 12:14 am
- 【Quantity】8pcs Carbide Rotary Burr Set, 1/4 inch shank , fits most Rotary Die grinders
- 【Durable】Made of heat-treated tungsten carbide that hardness can reach to HRC70, sharp and sturdy
- 【Versatile】Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, cylinder head porting and sculpting
- 【Target】Suitable for all skill levels: this is a essential kit for woodworkers & enthusiasts who cleans up welds or works with metal frequently, easy to grasp and use, safe and reliable
Big Horn 19392 6 PC Diamond Burr Set – 1/4" Shank, 80 Grit – Medium
$14.58
$20.70
Amazon.com
Last update was on: November 23, 2024 12:14 am
- 6 Assorted shapes
- Remove burrs on glass, metal, stone, porcelain, marble, granite, wood, ceramics, fiberglass and plastic
- Excellent for fine detail work, cutting, engraving, carving, touch-up and finishing
- Diamonds are nickel-bonded to the surface
- Each has a 1/4" shank for use with rotary tools, drills, and grinders.
Titanium Carbide Burr Set of 10, STARVAST Double Cut Rotary Burr Set with 1/8 inch Shank 1/4 inch Head Size Die Grinder Bits Rotary Files for Woodworking, Metal Carving, Engraving, Drilling, Polishing
$18.99
$28.30
Amazon.com
Last update was on: November 23, 2024 12:14 am
- 【Material】 Tungsten Carbide Rotary Burrs are made of solid tungsten carbide
- 【Size】 Total length 40 - 50mm
- Shaft - 1/8 Inch (3mm)
- Outer diameter of the tip – 1/4 inch (6mm)
- Tungsten carbide rotary burr suit for (6MM) 1/4 Inch Electric die grinder
- 【Cutting Bur Type & Shape】Double Cut
TEMO 50 pc Diamond Coated Grinder Head Lapidary Glass Burr with 1/8 Inch (3 mm) Shank for Dremel and Compatible Rotary Tools
$26.49
$34.70
Amazon.com
Last update was on: November 23, 2024 12:14 am
- New 50 pcs diamond coated grinder heads in box set.
- There are many sharp such as sphere, cylinder, bullet, needle, etc.....
- 1/8" (3.175mm) shank for use with motor tools, drills, high speed die grinders, and flex shafts.
- Suitable for use in grind the edge of glass, marble or rock.
- Come with the PVC box as shown on picture.
Diamond Burr Set For Dremel Rotary Tool Grinding Carving Notching Bur Bit Stone Tile Glass Lapidary Jewelry Die Grinder Coated File Cutter Cutting Kit
$12.89
$17.40
Amazon.com
Last update was on: November 23, 2024 12:14 am
- 26pc Set
- Includes 20 Diamond Burr Bits, 5 Diamond Cutting Wheels, And 1 Metal Mandrel (1/8" Shank)
- Compatible With Dremel Tool, Rotary Tools, WEN, And Die Grinders With 1/8" Collets
- Works On ANY Type of Metal, Stone, Glass, Tile, Concrete, Porcelain, Gemstone, Brick, Rock, And More
- For Cutting, Grinding, Carving, Notching, Etching, Engraving, Jewelry Working, Lapidary Use, Masonry
- Bur Set Includes Cylinder, Round Ball, Needle Point, And Cone Shaped Burs (Plus 5 Diamond Wheels)
10pcs 1/8" Double Cut Tungsten Carbide Rotary Files Diamond Burrs Set Fits Dremel Rotary Tool for Grinder Drill, DIY Wood-working Carving, Metal Polishing, Engraving, Drilling (SILVER)
$10.45
$13.48
Amazon.com
Last update was on: November 23, 2024 12:14 am
- Long Working Life: Lasts Long Working Life, Packed With Nice Plastic Case For Safety Storage And Protection. High Efficiency, High-quality Finish, Long Service Life, Good Economic Returns.
- Carbide Die Grinder Bits Material: Tungsten Carbide Use: Rotary Burr. Total Length 45-50mm, Cutting Diameter 1/4 Inch(6mm), Shank Length 35mm, Shank Diameter 1/8 Inch(3mm).
- High Productivity: Processing Efficiency Than The Manual File To Improve Of Times, Than With A Small Handle Wheel To Improve Nearly Ten Times.
SpeTool Carbide Rotary Burr For Aluminum Cutting (Non-Ferrous) 1/4 inch shank 4Pcs/Pack
$39.99
$53.19
Amazon.com
Last update was on: November 23, 2024 12:14 am
- 4-piece nonferrous carbide rotary burr set for peneumatic acccessories and die grinder burr
- High grade tungsten carbide burr, 1/4 Inch shank aluminum single Cut
- Aluminum die grinder bits are also for use on non-ferrous and non-metallic materials: Plastic, Zinc. It is designed for rapid stock removal with minimum chip loading
- High quality manufacturing method delivers vibratin free operation
- 1/4 inch shank for rotory, 4 pcs per pack, SA-3NF, SC-3NF, SD-3NF, SF-3NF
Pro-Quality 20-Piece Diamond Bur Set for Rotary Tool – Glass, Stone, Ceramic
$4.95
$6.04
Amazon.com
Last update was on: November 23, 2024 12:14 am
- This is a new set of 20 diamond coated burs
- This master diamond bur set allows you to shape, grind and finish with precision
- Great for filing glass, ceramics, tile, brick, plastics, wood, fiberglass, stone, rock carbide, gold, platinum, silver, metals or anything else that is hard
- Recommended for jewelers, lapidary, hobbies and crafts, modeling, home repair, etc
- Assortment includes various sizes of round, cone, inverted cone, tree, bud, cylinder and knife edge burs
Carving Expert Stone Carving Set Polishing Rotary Tools Diamond Burr Accessories for Carving/Engraving Stone, Rocks,Jewelry, Glass, Ceramics Dremel Rotary Tools
$17.98
$20.68
Amazon.com
Last update was on: November 23, 2024 12:14 am
- With a approx.1/8" shank - compatible with most Dremel universal power rotary tools.
- Assortment of shapes and sizes include: impeller,rounded cylinder,cylinder,tapered & needle
- Highly recommended for carving and cutting stones, rocks and mortar, DIY engraving hobbies, craft modeling, home repair (wood, some plastic and dogs’ nails)etc.
- Package:44pcs with plastic box
- Sold by Carving Expert, our honor to serve for you, buy with confidence
Big Horn 19391 5PC Diamond Burr Set – 1/4" Shank, 50 Grit – Coarse
$17.00
$19.38
Amazon.com
Last update was on: November 23, 2024 12:14 am
- 5 Assorted shapes
- Remove burrs on glass, metal, stone, porcelain, marble, granite, wood, ceramics, fiberglass and plastic
- Excellent for fine detail work, cutting, engraving, carving, touch-up and finishing
- Diamonds are nickel-bonded to the surface
- Each has a 1/4" shank for use with rotary tools, drills, and grinders
Carbide Burr Set JESTUOUS 1/8 Shank Diameter Double Cut Tungsten Carbide Burs Rotary File Carving Grinding Bit for Die Grinder Rotary Drill Tool 20pcs
$17.99
$20.69
Amazon.com
Last update was on: November 23, 2024 12:14 am
- Used with handheld electric or pneumatic tool drive,for Die Grinder, Dremmel Tool or Rotary Drill which can go along with 1/8" shank carbide burs.
- With tungsten carbide material ,sharp and sturdy,processing all kinds of metal and non-metal.
- For cast iron, cast steel, carbon steel, alloy steel, stainless steel,plastics,metal and other materials.
- Assorted shapes include: ball, cone, rounded cylinder, flat top cylinder.
OSIDU Carbide Burr Set-5pcs 6X8MM Head Carbide Rotary Burrs File Set with 1/4 Inch Shank for Die Grinder Drill Bits Metal Carving Bit Polishing Drilling
$17.99
$22.49
Amazon.com
Last update was on: November 23, 2024 12:14 am
- 5pcs 8MM Head Double Cut Solid Carbide Rotary Burr Set with 1/4 inch shank, fits most die grinder bits rotary drill carving bit cutting burs
- Machined from new raw tungsten carbide, hardness can reach to <
- HRC85, sharp and durable
- 【Long Life】It is ten times more durable than high speed steel and more than 200 times higher than alumina grinding wheel
- High product processing quality, high finish, can process out a various of high-precision mold cavity
Lukcase 50pcs Diamond Coated Grinding Head Grinding Burrs Set for Dremel Rotary Tool …
$15.75
$20.16
Amazon.com
Last update was on: November 23, 2024 12:14 am
- Suitable for Grinding field stone, ceramics, glass, carbide, tile, marble, jewelry or rock
- Designed for Rotary Tools including Dremel.
- Various Shapes meet your different needs, Such as,Cylinder head, cylinder, sphere, umbrella, bullet, Ding sheet type, inverted ladder, needle tip.
- Material: Diamond,Alloy, Color: Silver Tone as shown on the picture. Diameter of shank: 1/8 Inch,Grit: 120
