Best Drill Bit For Drilling Stainless Steel
Best results for best drill bit for drilling stainless steel
Migiwata 1/2 Inch Fractional Size M35 Cobalt Steel Twist Drill Bit Set of 2pcs – Jobber Length and Straight Shank – Extremely Heat Resistant – Perfect for Drilling in Stainless Steel and Cast Iron
$17.99
$25.37
Amazon.com
Last update was on: November 24, 2024 8:52 am
- COBALT STEEL - Manufactured from M35 grade cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- FOR STAINLESS STEEL - Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate.
1/4" M35 Cobalt HSS Jobber Length Twist Drill Bit with Straight Shank,Heavy Duty, Pack of 10 PCS, Drilling for Cast Iron, Heat-treated Steel, Stainless Steel and Other Hard Materials
$19.99
$27.79
Amazon.com
Last update was on: November 24, 2024 8:52 am
- Product Information: 10 drill bits: Each kit contains a total of ten drill bits in the same size
- Accurate and Neat: 135°Quick-Cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander"
- Excellent Performance: Bits are extremely heat resistant. Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks
Drill America 29 Piece Heavy Duty High Speed Steel Drill Bit Set with Black and Gold Finish in Round Case (1/16" – 1/2" x 64ths), KFD Series
$61.02
$70.17
Amazon.com
Last update was on: November 24, 2024 8:52 am
- Assortment of 29 jobber length drill bits includes inch sizes 1/16" to 1/2" in 1/64" increments
- High-speed steel (HSS) provides hardness for wear resistance
- Black and gold oxide finish resists corrosion and increases the hardness of the drill bit
- Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
- Comes in a plastic storage case
set of 3 HSS6542 M2 Steel Spiral Groove Step Drill Bit Set for Stainless Steel Metal Wood Hole
$26.21
$34.60
Amazon.com
Last update was on: November 24, 2024 8:52 am
- Suit for use in hardness under 28 artifacts,(Such as: Stainless steel , iron plate, aluminum, wood )
- You can use water to cooling it when it is work and it can be used for even longer
- Meet Your Demands - With the step drill bits we offered, you can process different kinds of diameter holes, which greatly saves you a lot of trouble.Great for metal wood plastic countersunk. Suitable for Home DIY, and General Building Engineering Use.
Best Choice 8-Piece 1/2” Shank Silver and Deming Drill Bit Set in Aluminum Carry Case, High Speed Steel (HSS) | SAE Size 9/16” – 1” by 1/16th Increment
$26.99
$34.01
Amazon.com
Last update was on: November 24, 2024 8:52 am
- Premium cobalt high speed steel construction for proven capability and durability to drill holes in wood, plastic, aluminum, copper, stainless, sheet metals and many other types of materials
- Superior gold titanium and black nitride dual coating finish holds up lubricant better for smoother drilling, and is 80% more durable and corrosion resistant than regular black enamel finish
- 135° Split point design at tip increases cutting speed with self-centering feature and prevents drill walking or wobbling
Bosch CO14B 14 Pc. Cobalt M42 Drill Bit Set
$32.98
$45.84
Amazon.com
Last update was on: November 24, 2024 8:52 am
- Cobalt M42 drill bit – provides upgraded M42 Cobalt jobber-length bits designed for durability, high heat resistance and Hardened surface for stainless steel, cast iron, titanium, light-gauge metal and aluminum
- Enhanced M42 alloy material – contains 8% Cobalt alloy that delivers 10x life vs. Standard bits
- High-heat resistant bits – withstand high-temperature applications for extended periods of time
3/16-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12
$19.76
$22.72
Amazon.com
Last update was on: November 24, 2024 8:52 am
- JOBBER LENGTH: 3/16-Inch cutting diameter, 2-5/16-Inch flute length, 3-1/2-Inch overall length, 135 degree split point, 3-flat shank
- MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits
- CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits
Max-Power 10pcs Pack 7/32" Inch High Speed Steel Cobalt M35 Fully Ground Heavy Duty General Purpose Jobber Length Twist Drill Bit 135 Deg. Split Point Drilling For Metal, Steel
$16.99
$20.90
Amazon.com
Last update was on: November 24, 2024 8:52 am
- ● Diameter: 7/32"
- Flute Length: 2-1/2"
- Overall Length: 3-3/4". HSS E HSS Co Cobalt Drill Bits
- ●M35 Cobalt High Speed Steel For Drilling Steel, Stainless Steel, Hard Metal and Iron..
- ●Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel
- ●135-degree split-point tip starts drilling immediately with less force and eliminates "walking" across the work surface
12 PCS,1/4", HSS Black and Gold Coated Twist Drill Bits, Metal drill, ideal for drilling on mild steel, copper, Aluminum, Zinc alloy etc. Pack in Plastic Bag
$19.99
$24.19
Amazon.com
Last update was on: November 24, 2024 8:52 am
- Bright finish: Classic M2 High Speed Steel construction with Bright Finish for proven capability and durability.
- Strength & Hardness: Made with HSS M2 steel, Rock wall Hardness Level HRC 62-63.
- Package & Size: 12 Pieces in a plastic bag, Diameter 5/16 inch, Total length 4-1/2 inch, Working length 3-3/16 inch.
- Professional & DIY Use: For use on metal, wood & plastics. Not For Use On Concrete / Masonry / Stainless Steel. Perfect match for workshop or service vehicles.
Migiwata Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bits with Straight Shank Set of 13pcs to Cut Through Hard Metals Such as Stainless Steel and Cast Iron
$13.99
$17.77
Amazon.com
Last update was on: November 24, 2024 8:52 am
- COBALT STEEL - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, extremely heat resistant
- for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- NO CENTER PUNCH NEEDED - The 135° Quick-Cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks. Must be used and operated at proper RPMs for maximum efficiency
1/8-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12
$15.05
$18.66
Amazon.com
Last update was on: November 24, 2024 8:52 am
- JOBBER LENGTH: 1/8-Inch cutting diameter, 1-5/8-Inch flute length, 2-3/4-Inch overall length, 135 degree split point, straight shank
- MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits
- CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits
COMOWARE Cobalt Drill Bit Set- 15Pcs M35 High Speed Steel Twist Jobber Length for Hardened Metal, Stainless Steel, Cast Iron and Wood Plastic with Indexed Storage Case, 1/16"-3/8"
$21.99
$24.41
Amazon.com
Last update was on: November 24, 2024 8:52 am
- HIGH QUALITY MATERIAL: 5% Cobalt High Speed Steel M35 provide extended tool life compared to ordinary drill bits. Durable and strong
- TWIST DESIGN & PERFORMANCE: PRECISE 135°SPLIT POINT, gold oxide finish and round straight shanks. Prevent walking, clear chips and particles faster.Produced by precision fully ground which ensures chips move smoothly.
- PROFESSIONAL & WIDELY USE: M35 Cobalt HSS is more suitable for hardened material. Particularly successful in cutting through hard metals such as stainless steel, cast iron, high temperature alloy, titanium alloy, hard plastics and woods, and also can be used for softer materials.
Metric M42 8% Cobalt Twist Drill Bits Set for Stainless Steel and Hard Metal (1mm-10mm/19pcs)
$34.89
$44.66
Amazon.com
Last update was on: November 24, 2024 8:52 am
- Premium M42 8% Cobalt Steel ,68-70 HRC (Rockwell Hardness Scale) ,Usually Give the Best Heat,Wear and Chip Resistance and Long Tool Life.
- 3 Steps Desigh for Cutting through Stainless Steel,Hard Metals,Aluminum,Plastic.
- This Cobalt Drill Bit is Typically Capable of Running Three to Five Times Faster.Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes.
COMOWARE Step Drill Bit Set & Automatic Center Punch- Titanium Coated, Double Cutting Blades, High Speed Steel, Short Length Drill Bits Set of 5 pcs, Total 50 Sizes with Aluminum Case
$24.49
$30.37
Amazon.com
Last update was on: November 24, 2024 8:52 am
- HSS Titanium Coating - High speed steel along with titanium coating ensures outstanding durability and sharpness, can reduces the friction, runs cooler.
- Meet Your Demands - With the step drill bits we offered, you can process different kinds of diameter holes, which greatly saves you a lot of trouble.Great for metal/wood/plastic countersunk. Suitable for Home DIY, and General Building/Engineering Use.
Bosch CO2143 1/4 In. x 4 In. Cobalt Drill Bit
$3.52
$4.01
Amazon.com
Last update was on: November 24, 2024 8:52 am
- Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF)
- Rigid, thick web design adds stability to bit in tough applications
- Surface hardened to penetrate tough abrasive materials
- Available in jobber length, full shank
- Best used for drilling into light-gauge metal, high-carbon steel, aluminum and ally steel, cast iron, stainless steel and titanium
DrillForce 10pcs 9/64 inch x 2-7/8 inch Cobalt Drill Bits, High Speed Steel Twist Drill Bits, Jobber Length, Round Shank. Can drill Stainless Steel, Ideal for DIY, home, general building and engineeri
$9.59
$11.70
Amazon.com
Last update was on: November 24, 2024 8:52 am
- Cobalt drill bits: Classic 5% Cobalt M35 High Speed Steel construction with Titanium Coating for proven capability and durability.
- Hardness: 5% Cobalt drill bits’ Rock wall Hardness Level HRC 65-66.
- Package & Size: 10 Pieces drill bits in a plastic bag, Diameter 9/64 inch, Total length 2-7/8 inch, Working length 1-3/4 inch.
- Professional & DIY Use: For use on metal, wood & plastics, Stainless Steel, Not For Use On Concrete / Masonry. Perfect match for workshop or service vehicles.
