Finding your suitable readers for hp ssd 250gb is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for hp ssd 250gb including detail information and customer reviews. Let’s find out which is your favorite one.
HP SSD S700 Pro Series delivers compact storage and optimized performance for traditional, innovative small-form-factor, and embedded platforms.
2.5inch SSD design has a significantly smaller footprint than a 2.5inch hard disk drive (HDD).
Enables fast read/write access times and a significant I/O and throughput performance improvement as compared to HDDs.
Ideal for new and innovative small form factor computing platforms that have size and weight requirements that traditional 2.5inch HDD s cannot meet.
Supports: notebooks, thin-and-light systems, mini-and sub-notebooks, all in-one computers, and embedded platforms.
Product Specifications:
Capacity 250GB
Components 3D TLC NAND Flash
Read and Write IOPS Random 4 KB reads: Up to 55 K IOPS Random 4 KB writes: Up to 80 K IOPS
Bandwidth Performance Sustained sequential read: Up to 555 MB/s Sustained sequential write: Up to 515MB/s
SATA 1.5 Gb/s ,3 Gb/s and 6 Gb/s interface ATA/ATAPI-7 SSD-enhanced S.M.A.R.T. ATA feature Native Command Queuing (NCQ) command set Data set management command Trim attribute
Form Factor Full-sized 2.5inch SSD
Power Management 5 V 2.5inch SSD power supply 2.5inch SSD interface power management
Power (Mobile Mark 2007 Workload) Idle:340 mW(TYP) max: 1.38W (TYP)
Temperature Operating: 0C to 70C Non-Operating: -40C to 85C
Shock (operating and non-operating) 100 G/6 msec Vibration(operating and non-operating) 3.1G RMS (2-500 Hz)
Latency Read: 0.030ms (TYP) Write: 0.188ms (TYP)
Reliability Uncorrectable Bit Error Rate (UBER): 1 sector in 10^16bits read Mean Time Between Failures (MTBF): 2,000,000 hours
New 3D NAND technology and advanced wear balancing algorithm for higher durability @0. 6 Drive writes per day
An industry-top-leading reliability (MTBF) 2M hours, and endurance (TBW) 70 to 295 TBW
Higher order LDPC error Correction for high speed parallel decoding and real time error Correction to ensure data integrity and security
Full compatibility with host. Exe (HP software pre-installation environment). Ideal upgrade for HP PCs
Manufactured to HP high quality standards and fully tested and CERTIFIED in HP laboratories
Style:SATA III 3D NAND SLC | Capacity:250GB
HP SSD S700 Series delivers compact storage and optimized performance for traditional and innovative small-form-factor and embedded platforms in 3 capacity sizes: 128GB、256GBand 512GB .
The case 2.5inch SSD design has a significantly smaller footprint than a 2.5inch hard disk drive (HDD), and enables fast read/write access times and a significant I/O and throughput performance improvement as compared to HDDs. This design makes it ideal for new and innovative small form factor computing platforms that have size and weight requirements that traditional 2.5inch HDD s cannot meet; such as, notebook, thin-and-light systems, mini-and sub-notebooks, all in-one computers, and embedded platforms.
M.2 2280, HP controller Offering with 4 flash memory channels that support PCIe 3.1 x4 and NVMe 1.3
Sequential read/write speeds up to 2, 100 Mbps/ 1, 500 Mbps, an industry top leading reliability (MTBF) 2M hours, and endurance (TBW) up to 200 TBW
Higher order LDPC error Correction for high speed parallel decoding and real time error Correction to ensure data integrity and security
Works on all Windows PC, Full compatibility with host.Exe (HP software pre-installation environment). Ideal upgrade for HP PCs
Manufactured to HP high quality standards and fully tested and CERTIFIED in HP laboratories. Not intended for use in HP workstations
Model Brand: HP Series: EX900 M.2 model: 2yy44aa#abc device Type: internal Solid State Drive (SSD) used for: consumer Details form factor: M.2 2280 Capacity: 500GB memory components: 3D TLC NAND interface: PCI-Express 3(8gb/s) x4, NVMe 1.3 compliant with PCI-Express 3.1 performance MAX sequential read: up to 2, 100 Mbps Max sequential write: up to 1, 500 Mbps 4KB random read: up to 100, 000 IOPS 4KB random Write: up to 80, 000 IOPS read latency: 0.021ms write latency: 0.029ms MTBF: 2, 000, 000 hours Features High performance low power increased system responsiveness high reliability small Form-Factor minimum weight enhanced ruggedness high data integrity and security environmental power consumption (idle): 0.68W power consumption (active): 3.52W Operating temperature: 0°C +70°C storage Temperature: -40°C +85°C Max shock resistance: 100G/ 6 msec Max vibration resistance: 3.1 grams (2-500 Hz) Dimensions & Weight height: 2.4mm width: 22.00mm Depth: 80.00mm weight: 5.4G. Max. Sequential Read (MB/s) 2100, Max. Sequential Write (MB/s) 1500, Max. Random Read (IOPS) 100K and Max .Random Write (IOPS) 80K.
M. 2 2280, HP controller Offering with 4 flash memory channels that support PCIe 3. 1 x4 and NVMe 1. 3
Sequential read/write speeds up to 2, 100 Mbps/ 1, 500 Mbps, an industry top leading reliability (MTBF) 2M hours, and endurance (TBW) up to 200 TBW
Higher order LDPC error Correction for high speed parallel decoding and real time error Correction to ensure data integrity and security
Works on all Windows PC, Full compatibility with host. Exe (HP software pre-installation environment). Ideal upgrade for HP PCs
Manufactured to HP high quality standards and fully tested and CERTIFIED in HP laboratories, not intended for use in HP workstations.
Ultra-high Performance without Latency The read and write speed of EX900 reach 2150MB / s and 1815MB / s respectively, which ensures faster speed and higher efficiency. EX900 fully accelerates the PC systems, enabling PC boot, program startup and files loading in seconds. HP PCIe Controller, Better Performance & Stability HP EX900 M. 2 features an HP controller with 4 flash memory channels that support PCIe3x4 and NVMe 1. 3 standard. Maximize gaming notebook and high-end computer & apos; s performance, and increase responsiveness. 3D Nand Flash, Break through Space Limitation HP EX900 M. 2 features an HP controller with 4 flash memory channels that support PCIe3x4 and NVMe 1. 3 standard. Maximize gaming notebook and high-end computer & apos; s performance, and increase responsiveness. Quite Capable of Boosting High-performance PCC With a size of 22x80x2. 4mm (2280), HP EX900 M. 2 is a new storage solution with ultra-high performance. Compatible with new generation motherboard architecture, EX900 is applicable to high-end motherboards, notebooks and desktops with PCIe M. 2 interface. EX900 also supports HP PC DST self-test, ensuring the durability in use. With the performance improved and capacity upgraded, the efficiency of operation and gameplay is also raised. High Stability and Reliability to Improve the Efficiency The Choice for High Efficiency The stable and efficient storage performance of EX900 helps you to operate various related software and work efficiently with half effort. Enjoy the Speed Unleashed EX900 makes the slow loading and latency of computer game to end and enables you to enjoy more wonderful gaming time. CapacityC250GB ModelC2YY43AAABC Interface / Protocol HP SSD EX900 M. 2 2280CPCIe Gen 3(8Gb / s) x 4, NVMe 1. 3 Performance4KB QD32) C Max. Sequential Read (MB / s)C2100 Max. Sequential Write (MB / s)C1300 Max. . . .
New 3D NAND technology and advanced wear balancing algorithm for higher durability @0.6 Drive writes per day
An industry-top-leading reliability (MTBF) 2M hours, and endurance (TBW) up to 295 TBW
More endurable storage
Energy saving and noiseless
Specifications Mfr Part Number: 2DP98AA#ABC capacity: 250gb form factor: 2.5 inch interface: sata 1.5 Gb/s, 3 GB/s and 6 GB/s NAND flash: 3D TLC latency: read – 0.026ms; write – 0.223ms performance: Sequential Read speed: up to 562 mb/s sequential Write speed: up to 516 mb/s 4K random read speed: up to 85K IOPS 4K random write speed: up to 90K IOPS MTBF: 2.0 million hours power consumption: idle: 340 mw (typ) Max: 1.38 W (TYP) shock: operating: 100 G/6 msec Non-operating: 100 G/6 msec ‹vibration: operating: 3.1G rms (2-500 Hz) Non-operating: 3.1G rms (2-500 Hz) temperature: 0°c to 70°c (operating); -4°c to 85°c (Non-operating) thickness: ‰¤ 7 mm Dimensions: 100.2 x 69.8 mm Weight: ‰¤ 80.0 g
M.2 2280, HP controller Offering with 4 flash memory channels that support PCIe 3.1 x4 and NVMe 1.3
Sequential read/write speeds up to 1, 900 Mbps/ 1, 500 Mbps, an industry top leading reliability (MTBF) 2M hours, and endurance (TBW) up to 200 TBW
Higher order LDPC error Correction for high speed parallel decoding and real time error Correction to ensure data integrity and security
Works on all Windows PC, Full compatibility with host.Exe (HP software pre-installation environment). Ideal upgrade for HP PCs
Manufactured to HP high quality standards and fully tested and CERTIFIED in HP laboratories. Not intended for use in HP workstations
Capacity:120GB
M.2 2280, HP controller offering with 8 flash memory channels that support PCIe 3.0 x4 and NVMe 1.3, sequential read/write speeds up to 3, 200 Mbps/ 1, 800 Mbps, an industry top leading reliability (MTBF) 2M hours, and endurance (TBW) up to 400 TBW, higher order LDPC error Correction for high speed parallel decoding and real time error Correction to ensure data integrity and security, works on all Windows PC, Full compatibility with HP’s.Exe (HP software pre-installation environment). Ideal upgrade for HP PCs manufactured to HP High quality standards and fully tested and certified in HP laboratories
New 3D NAND Technology and advanced wear balancing algorithm for higher durability @0.6 Drive Writes Per Day
Up to 1GB DRAM Cache for better multi-tasking and durability, Higher Order LDPC Error Correction for high speed parallel decoding and real time error correction to ensure data integrity and security
Works on all Windows PC, Full compatibility with HPdst.exe (HP Software Pre-installation Environment). Ideal upgrade for HP PCs
Manufactured to HP’s high quality standards and fully tested and certified in HP Laboratories, 1-800 Technical Support Provided, Not intended for use in HP Workstations
An industry-top-leading Reliability (MTBF) 2M hours, and Endurance (TBW) up to 650 TBW
Capacity:1TB
Product Specifications:
Brand HP
Series S700 Pro
Model 2LU81AA#ABL
Device Type Internal Solid State Drive (SSD)
Form Factor 2.5″
Capacity 1TB
Memory Components 3D NAND
Interface SATA III
Max Sequential Read Up to 570 MBps
Max Sequential Write Up to 525 MBps
4KB Random Read Up to 90,000 IOPS
4KB Random Write Up to 95,000 IOPS
Read Latency 0.033ms
Write Latency 0.030ms
MTBF 2,000,000 hours
Endurance (TBW): 650 TBW
Features TRIM and ECC Supported S.M.A.R.T Supported NCQ Management HP DST Self Test
M.2 2280, HP controller Offering with 8 flash memory channels that support PCIe 3.1 x4 and NVMe 1.3
Sequential read/write speeds up to 3, 200 Mbps/ 1, 800 Mbps, an industry top leading reliability (MTBF) 2M hours, and endurance (TBW) up to 400 TBW
Higher order LDPC error Correction for high speed parallel decoding and real time error Correction to ensure data integrity and security
Works on all Windows PC, Full compatibility with host.Exe (HP software pre-installation environment). Ideal upgrade for HP PCs
Manufactured to HP high quality standards and fully tested and CERTIFIED in HP laboratories. Not intended for use in HP workstations
Color:512GB
Model Brand: HP Series: EX920 M.2 model: 2yy46aa#abc device Type: internal Solid State Drive (SSD) used for: consumer Details form factor: M.2 2280 Capacity: 512GB memory components: 3D TLC NAND interface: PCI-Express 3(8gb/s) x4, NVMe 1.3 compliant with PCI-Express 3.1 performance MAX sequential read: up to 3, 200 Mbps Max sequential write: up to 1, 600 Mbps 4KB random read: up to 340, 000 IOPS 4KB random Write: up to 260, 000 IOPS read latency: 0.024ms write latency: 0.026ms MTBF: 2, 000, 000 hours Features High performance low power increased system responsiveness high reliability small Form-Factor minimum weight enhanced ruggedness high data integrity and security environmental power consumption (idle): 0.73W power consumption (active): 5.61W Operating temperature: 0°C +70°C storage Temperature: -40°C +85°C Max shock resistance: 100G/ 6 msec Max vibration resistance: 3.1 grams (2-500 Hz) Dimensions & Weight height: 3.5mm width: 22.00mm Depth: 80.00mm weight: 5.4G
By our suggestions above, we hope that you can found Hp Ssd 250Gb for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Hp Ssd 250Gb, eg:
What are Top 10 Hp Ssd 250Gb for 2020, for 2019, for 2018 or even 2017 (old models)?
What is Top 10 Hp Ssd 250Gb to buy?
What are Top Rated Hp Ssd 250Gb to buy on the market?
or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Hp Ssd 250Gb?…
All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Hp Ssd 250Gb.
Before deciding to buy any Hp Ssd 250Gb, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
You will know how you should choose Hp Ssd 250Gb and What you should consider when buying the Hp Ssd 250Gb and Where to Buy or Purchase the Hp Ssd 250Gb. Just consider our rankings above as a suggestion. The final choice is yours.
That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
You could see the top 10 Hp Ssd 250Gb of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Hp Ssd 250Gb.
Finding your suitable readers for hp ssd 250gb is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for hp ssd 250gb including detail information and customer reviews. Let’s find out which is your favorite one.
New 3D NAND technology and advanced wear balancing algorithm for higher durability @0. 6 Drive writes per day
An industry-top-leading reliability (MTBF) 2M hours, and endurance (TBW) 70 to 295 TBW
Higher order LDPC error Correction for high speed parallel decoding and real time error Correction to ensure data integrity and security
Full compatibility with host. Exe (HP software pre-installation environment). Ideal upgrade for HP PCs
Manufactured to HP high quality standards and fully tested and CERTIFIED in HP laboratories
Style:SATA III 3D NAND SLC | Capacity:250GB
HP SSD S700 Series delivers compact storage and optimized performance for traditional and innovative small-form-factor and embedded platforms in 3 capacity sizes: 128GB、256GBand 512GB .
The case 2.5inch SSD design has a significantly smaller footprint than a 2.5inch hard disk drive (HDD), and enables fast read/write access times and a significant I/O and throughput performance improvement as compared to HDDs. This design makes it ideal for new and innovative small form factor computing platforms that have size and weight requirements that traditional 2.5inch HDD s cannot meet; such as, notebook, thin-and-light systems, mini-and sub-notebooks, all in-one computers, and embedded platforms.
HP SSD S700 Pro Series delivers compact storage and optimized performance for traditional, innovative small-form-factor, and embedded platforms.
2.5inch SSD design has a significantly smaller footprint than a 2.5inch hard disk drive (HDD).
Enables fast read/write access times and a significant I/O and throughput performance improvement as compared to HDDs.
Ideal for new and innovative small form factor computing platforms that have size and weight requirements that traditional 2.5inch HDD s cannot meet.
Supports: notebooks, thin-and-light systems, mini-and sub-notebooks, all in-one computers, and embedded platforms.
Product Specifications:
Capacity 250GB
Components 3D TLC NAND Flash
Read and Write IOPS Random 4 KB reads: Up to 55 K IOPS Random 4 KB writes: Up to 80 K IOPS
Bandwidth Performance Sustained sequential read: Up to 555 MB/s Sustained sequential write: Up to 515MB/s
SATA 1.5 Gb/s ,3 Gb/s and 6 Gb/s interface ATA/ATAPI-7 SSD-enhanced S.M.A.R.T. ATA feature Native Command Queuing (NCQ) command set Data set management command Trim attribute
Form Factor Full-sized 2.5inch SSD
Power Management 5 V 2.5inch SSD power supply 2.5inch SSD interface power management
Power (Mobile Mark 2007 Workload) Idle:340 mW(TYP) max: 1.38W (TYP)
Temperature Operating: 0C to 70C Non-Operating: -40C to 85C
Shock (operating and non-operating) 100 G/6 msec Vibration(operating and non-operating) 3.1G RMS (2-500 Hz)
Latency Read: 0.030ms (TYP) Write: 0.188ms (TYP)
Reliability Uncorrectable Bit Error Rate (UBER): 1 sector in 10^16bits read Mean Time Between Failures (MTBF): 2,000,000 hours
M.2 2280, HP controller Offering with 4 flash memory channels that support PCIe 3.1 x4 and NVMe 1.3
Sequential read/write speeds up to 2, 100 Mbps/ 1, 500 Mbps, an industry top leading reliability (MTBF) 2M hours, and endurance (TBW) up to 200 TBW
Higher order LDPC error Correction for high speed parallel decoding and real time error Correction to ensure data integrity and security
Works on all Windows PC, Full compatibility with host.Exe (HP software pre-installation environment). Ideal upgrade for HP PCs
Manufactured to HP high quality standards and fully tested and CERTIFIED in HP laboratories. Not intended for use in HP workstations
Model Brand: HP Series: EX900 M.2 model: 2yy44aa#abc device Type: internal Solid State Drive (SSD) used for: consumer Details form factor: M.2 2280 Capacity: 500GB memory components: 3D TLC NAND interface: PCI-Express 3(8gb/s) x4, NVMe 1.3 compliant with PCI-Express 3.1 performance MAX sequential read: up to 2, 100 Mbps Max sequential write: up to 1, 500 Mbps 4KB random read: up to 100, 000 IOPS 4KB random Write: up to 80, 000 IOPS read latency: 0.021ms write latency: 0.029ms MTBF: 2, 000, 000 hours Features High performance low power increased system responsiveness high reliability small Form-Factor minimum weight enhanced ruggedness high data integrity and security environmental power consumption (idle): 0.68W power consumption (active): 3.52W Operating temperature: 0°C +70°C storage Temperature: -40°C +85°C Max shock resistance: 100G/ 6 msec Max vibration resistance: 3.1 grams (2-500 Hz) Dimensions & Weight height: 2.4mm width: 22.00mm Depth: 80.00mm weight: 5.4G. Max. Sequential Read (MB/s) 2100, Max. Sequential Write (MB/s) 1500, Max. Random Read (IOPS) 100K and Max .Random Write (IOPS) 80K.
M. 2 2280, HP controller Offering with 4 flash memory channels that support PCIe 3. 1 x4 and NVMe 1. 3
Sequential read/write speeds up to 2, 100 Mbps/ 1, 500 Mbps, an industry top leading reliability (MTBF) 2M hours, and endurance (TBW) up to 200 TBW
Higher order LDPC error Correction for high speed parallel decoding and real time error Correction to ensure data integrity and security
Works on all Windows PC, Full compatibility with host. Exe (HP software pre-installation environment). Ideal upgrade for HP PCs
Manufactured to HP high quality standards and fully tested and CERTIFIED in HP laboratories, not intended for use in HP workstations.
Ultra-high Performance without Latency The read and write speed of EX900 reach 2150MB / s and 1815MB / s respectively, which ensures faster speed and higher efficiency. EX900 fully accelerates the PC systems, enabling PC boot, program startup and files loading in seconds. HP PCIe Controller, Better Performance & Stability HP EX900 M. 2 features an HP controller with 4 flash memory channels that support PCIe3x4 and NVMe 1. 3 standard. Maximize gaming notebook and high-end computer & apos; s performance, and increase responsiveness. 3D Nand Flash, Break through Space Limitation HP EX900 M. 2 features an HP controller with 4 flash memory channels that support PCIe3x4 and NVMe 1. 3 standard. Maximize gaming notebook and high-end computer & apos; s performance, and increase responsiveness. Quite Capable of Boosting High-performance PCC With a size of 22x80x2. 4mm (2280), HP EX900 M. 2 is a new storage solution with ultra-high performance. Compatible with new generation motherboard architecture, EX900 is applicable to high-end motherboards, notebooks and desktops with PCIe M. 2 interface. EX900 also supports HP PC DST self-test, ensuring the durability in use. With the performance improved and capacity upgraded, the efficiency of operation and gameplay is also raised. High Stability and Reliability to Improve the Efficiency The Choice for High Efficiency The stable and efficient storage performance of EX900 helps you to operate various related software and work efficiently with half effort. Enjoy the Speed Unleashed EX900 makes the slow loading and latency of computer game to end and enables you to enjoy more wonderful gaming time. CapacityC250GB ModelC2YY43AAABC Interface / Protocol HP SSD EX900 M. 2 2280CPCIe Gen 3(8Gb / s) x 4, NVMe 1. 3 Performance4KB QD32) C Max. Sequential Read (MB / s)C2100 Max. Sequential Write (MB / s)C1300 Max. . . .
New 3D NAND technology and advanced wear balancing algorithm for higher durability @0.6 Drive writes per day
An industry-top-leading reliability (MTBF) 2M hours, and endurance (TBW) up to 295 TBW
More endurable storage
Energy saving and noiseless
Specifications Mfr Part Number: 2DP98AA#ABC capacity: 250gb form factor: 2.5 inch interface: sata 1.5 Gb/s, 3 GB/s and 6 GB/s NAND flash: 3D TLC latency: read – 0.026ms; write – 0.223ms performance: Sequential Read speed: up to 562 mb/s sequential Write speed: up to 516 mb/s 4K random read speed: up to 85K IOPS 4K random write speed: up to 90K IOPS MTBF: 2.0 million hours power consumption: idle: 340 mw (typ) Max: 1.38 W (TYP) shock: operating: 100 G/6 msec Non-operating: 100 G/6 msec ‹vibration: operating: 3.1G rms (2-500 Hz) Non-operating: 3.1G rms (2-500 Hz) temperature: 0°c to 70°c (operating); -4°c to 85°c (Non-operating) thickness: ‰¤ 7 mm Dimensions: 100.2 x 69.8 mm Weight: ‰¤ 80.0 g
M.2 2280, HP controller Offering with 4 flash memory channels that support PCIe 3.1 x4 and NVMe 1.3
Sequential read/write speeds up to 1, 900 Mbps/ 1, 500 Mbps, an industry top leading reliability (MTBF) 2M hours, and endurance (TBW) up to 200 TBW
Higher order LDPC error Correction for high speed parallel decoding and real time error Correction to ensure data integrity and security
Works on all Windows PC, Full compatibility with host.Exe (HP software pre-installation environment). Ideal upgrade for HP PCs
Manufactured to HP high quality standards and fully tested and CERTIFIED in HP laboratories. Not intended for use in HP workstations
Capacity:120GB
M.2 2280, HP controller offering with 8 flash memory channels that support PCIe 3.0 x4 and NVMe 1.3, sequential read/write speeds up to 3, 200 Mbps/ 1, 800 Mbps, an industry top leading reliability (MTBF) 2M hours, and endurance (TBW) up to 400 TBW, higher order LDPC error Correction for high speed parallel decoding and real time error Correction to ensure data integrity and security, works on all Windows PC, Full compatibility with HP’s.Exe (HP software pre-installation environment). Ideal upgrade for HP PCs manufactured to HP High quality standards and fully tested and certified in HP laboratories
New 3D NAND Technology and advanced wear balancing algorithm for higher durability @0.6 Drive Writes Per Day
Up to 1GB DRAM Cache for better multi-tasking and durability, Higher Order LDPC Error Correction for high speed parallel decoding and real time error correction to ensure data integrity and security
Works on all Windows PC, Full compatibility with HPdst.exe (HP Software Pre-installation Environment). Ideal upgrade for HP PCs
Manufactured to HP’s high quality standards and fully tested and certified in HP Laboratories, 1-800 Technical Support Provided, Not intended for use in HP Workstations
An industry-top-leading Reliability (MTBF) 2M hours, and Endurance (TBW) up to 650 TBW
Capacity:1TB
Product Specifications:
Brand HP
Series S700 Pro
Model 2LU81AA#ABL
Device Type Internal Solid State Drive (SSD)
Form Factor 2.5″
Capacity 1TB
Memory Components 3D NAND
Interface SATA III
Max Sequential Read Up to 570 MBps
Max Sequential Write Up to 525 MBps
4KB Random Read Up to 90,000 IOPS
4KB Random Write Up to 95,000 IOPS
Read Latency 0.033ms
Write Latency 0.030ms
MTBF 2,000,000 hours
Endurance (TBW): 650 TBW
Features TRIM and ECC Supported S.M.A.R.T Supported NCQ Management HP DST Self Test
New 3D NAND technology and advanced wear balancing algorithm for higher durability @0. 6 Drive writes per day
An industry-top-leading reliability (MTBF) 2M hours, and endurance (TBW) up to 295 TBW
Higher order LDPC error Correction for high speed parallel decoding and real time error Correction to ensure data integrity and security
All metal body – heat dissipation and durability in a PC environment
Full compatibility with host. Exe (HP software pre-installation environment). Ideal upgrade for HP PCs
Give your computer a performance boost with the HP S700 SSD. This SATA III SSD is built with premium quality 3D NAND chips, delivering blazing-fast read/write speed that transform your everyday computing experience – the system starts up in seconds, apps launch in a flash, and multitasking is more smooth and responsive than HDD. A suite of advanced technologies is built in, like advanced wearing balancing algorithm for durability, TRIM that maintains performance over usage, and Higher Order LDPC Error Correction for data integrity and security. Plus, the 7mm thickness fits well in laptops and Ultrabooks, and all metal body is strong and acts as heatsink for better stability. New 3D NAND Technology and advanced wear balancing algorithm for higher durability @0.5 Drive Writes Per Day. Higher Order LDPC Error Correction for high speed parallel decoding and real time error correction to ensure data integrity and security. Less than 5mW power under device sleep mode for significantly reduced power usage therefore extended battery runtime Manufactured to HP’s high quality standards and fully tested and certified in HP Laboratories
Brand new in Box. The product ships with all relevant accessories
Package length: 1.5cm
Package width: 11.6cm
Package height: 14.6cm
Specifications Mfr Part Number: 2DP97AA#ABC capacity: 120gb form factor: 2.5 inch interface: SATA 1.5 Gb/s, 3 GB/s and 6 GB/s NAND flash: 3D TLC latency: read – 0.032ms; write – 0.210ms performance: Sequential Read speed: up to 561 MB/s sequential Write speed: up to 511 MB/s 4K random read speed: up to 71K IOPS 4K random Write speed: up to 82K IOPS MTBF: 2.0 million hours power consumption: idle: 340 mw (typ) Max: 1.38 W (TYP) shock: operating: 100 G/6 msec Non-operating: 100 G/6 msec ‹vibration: operating: 3.1G rms (2-500 Hz) Non-operating: 3.1G rms (2-500 Hz) temperature: 0°c to 70°c (operating); -4°c to 85°c (Non-operating) thickness: ‰¤ 7 mm Dimensions: 100.2 x 69.8 mm Weight: ‰¤ 80.0 g
By our suggestions above, we hope that you can found Hp Ssd 250Gb for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Hp Ssd 250Gb, eg:
What are Top 10 Hp Ssd 250Gb for 2020, for 2019, for 2018 or even 2017 (old models)?
What is Top 10 Hp Ssd 250Gb to buy?
What are Top Rated Hp Ssd 250Gb to buy on the market?
or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Hp Ssd 250Gb?…
All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Hp Ssd 250Gb.
Before deciding to buy any Hp Ssd 250Gb, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
You will know how you should choose Hp Ssd 250Gb and What you should consider when buying the Hp Ssd 250Gb and Where to Buy or Purchase the Hp Ssd 250Gb. Just consider our rankings above as a suggestion. The final choice is yours.
That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
You could see the top 10 Hp Ssd 250Gb of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Hp Ssd 250Gb.
