Top 10 Bearing Pump Water 12 Hp

Acquaer CJE050-1 is a 1/2 HP convertible Jet Pump can be used as shallow well jet pump where depth of the well is 25 ft. and deep well jet pump where depth of well is 26-80 ft.. The pump can run at 115 or 230 volts with the quick change voltage selection switch, and the pressure switch is set to 30 psi on and 50 psi off for high-pressure delivery

Product Description

1/2 HP, Cast Iron, Submersible Sump Pump, With Vertical Switch, Designed For 11″ Diameter Or Larger Sump Basin. Pumps Up To 4200 GPH at 0′, Durable Cast Iron Volute, Reliable, Reinforced Poly Carbonate Impeller, Corrosion Resistant Stainless Steel Fasteners, Top Suction Design Filters Debris & Minimizes Clogging, Oil Filled, Thermally Protected Motor Prevents Overheating, Designed For Easy Installation Without Any Plumbing Changes, Epoxy Coated Steel, High Performance 1/2 HP, Motor, 1-1/2″ NPT Discharge & Durable Cast Iron Base, Easy Carry Handle For Portability, Float Guard Protects Switch From Hang Ups. This product is assembled in the USA. Easy installation and easy handling.

Amazon.com

The Wayne 1/2 HP cast iron submersible sump pump is designed for work in sump pits 11 inches or larger. Its ceramic mechanical seal keeps this pump going in even the most demanding environments, and the 1 1/2-inch discharges creates maximum flow and ensures easy installation. It works 9 inches on level or 4 inches off level. A two-pole switch prevents basement flooding in the event that one pole sticks, and disconnecting 115-volt conductors prevent damage from lightning. The automatic overload mechanism prevents damage to motor windings, permanently lubricated ball bearings need no oiling, and the waterproof three-prong grounding wire with an 8-foot extension reaches distant outlets. Wayne backs its pump with a three-year limited warranty.

See all Product description

Product Description

1/2 HP, Cast Iron, Portable Utility Pump, Pumps Up To 1450 GPH at 0′, Portable Cast Iron Transfer Utility Pump, High Performance 1/2 HP, Motor Boosts Line Pressure Up To 40 PSI, 3/4″ Brass Hose Adapters Connect To Standard Garden Hose, Portable Transfer Pump, You Can Take Anywhere & Plug In, Easy Prime Priming Outlet, Applications Include Drainage, Dewatering Flooded Basements, Emptying Stock Tanks, Draining Water Heaters, Charging Polyglycol Radiant Heating Lines, Easy Carry Cast Iron Handle For Portability, Reinforced Thermoplastic Suction Strainer Included. The product is manufactured in China. Easy installation and easy handling.

Amazon.com

The Wayne 1/2 HP 115-volt transfer water pump can pump water out of flooded basements, tanks, or boats. It can also increase line pressure by up to 40 pounds or be used to water lawns and gardens, and can even be used to wash cars and sidewalks. It’s made from durable cast iron steel. The included suction strainer keeps out extraneous material, and the 3/4-inch brass hose connections resist stripping while easily connecting to garden hoses. A top-threaded priming port is easily filled, and the ball bearings have lifetime lubrication. Wayne backs its pump with a one-year limited warranty.

Product Description

Shallow well jet pump with built-in pressure switch. Superior performance at depths to water of 25′ or less. 1/2 HP pumps up to 8 GPM. 3/4 HP pumps up to 12 GPM. 1 HP pumps up to 18 GPM. Fiberglass-reinforced thermoplastic pump housing for the highest corrosion-resistance. Heavy-duty dual-voltage motor – 1/2 HP preset at 115V; 3/4 HP and 1 HP preset at 230V. Self-priming after pump housing is initially filled. CSA certified.

Amazon.com

This 1/2 HP, built-in shallow well pump jet from Flotec is ideal for wells with pumping levels of 25 feet or less. Featuring a corrosion-resistant nozzle and venturi, this model offers superior performance at capacities to 10 GPM at 40 PSI. It works by self-priming after the pump housing is initially filled with water. The fiberglass-reinforced thermoplastic construction provides incredible corrosion resistance, as well as resistance to sandy water. The dust-proof cover protects all electrical components from dust and insects, thus resulting in a longer-lasting motor. With a stainless steel shaft, heavy duty ball bearings, balanced rotor, mechanical shaft seal and insulated motor windings, the pump’s powerful motor delivers non-stop operation for years to come.

See all Product description

Product Description

331 Features: -Pump.-Perfect for boosting water pressure, draining hot water tanks and general water transfer.-Not intended for permanent installations.-0.75” Brass garden hose connectors.-Glass reinforced thermoplastic impeller.-Large prime plug with internal funnel design easy priming.-Easily replaced motor brushes.-Maximum suction lift of 180”.-Thermally protected.-Engine HP: 1/2.-RPM: 7500.-Power cord: 240”.-Maximum fluid temperature: 135 F. Color/Finish: -Durable epoxy powder coat finish. Specifications: -Include: One-piece cast aluminum pump and motor housing with integral carry handle, permanently lubricated bearings, convenient on / off switch, powerful 0.5 hp motor capable of pumping to over 1200” of head.-115 Volts / 60 Hz / 8 Amps motor. Dimensions: -Dimensions: 7” H x 4.5” W x 9.75” D. Warranty: -2-Year warranty.

From the Manufacturer

This portable pump is perfect for boosting water pressure, draining hot water tanks and general water transfer. Features include a one-piece cast aluminum pump and motor housing with integral carry handle, permanently lubricated bearings, a convenient On/Off switch, and a powerful 1/2hp motor capable of pumping to over 100-Feet of head. Not intended for permanent installations. This pump delivers up to 40-Pound of pressure, has a maximum discharge head of 105-Feet , and a maximum vertical suction lift of 15-Feet.

Product Description

Superior Pump builds pumps that are truly Built to Last and are 100 percent factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 93501, 1/2 HP cast iron submersible sewage pump with tethered float switch, will pump up to 4800 gallons per hour. Equipped with 2-inch NPT discharge, will handle up to 2-inch solids and features a non-clogging vortex impeller. This pump is UL/CUL listed and CSA certified and backed by a 1 year warranty.

Amazon.com

From Superior Pump, this submersible sewage pump features a tethered float switch and a reliable 1/2-horsepower continuous-duty motor. Able to handle 2-inch solids, this large-capacity pump can lift water up to 25 feet and deliver flow rates up to 80 gallons per minute. Its cast iron body and non-clogging Vortex impeller ensure a long, low-maintenance life.

Submersible, non-clogging, large-capacity pump features durable cast iron housing (view larger).

Large Capacity Suited to Home and Commercial Applications

This dependable, submersible sewage pump is built to effectively handle a range of typical residential and commercial applications. Whether material is being moved from a basin to a drainage field or from a basin up to sewer or septic lines, the pump’s large discharge design easily handles 2-inch solids and high-capacity pumping. It is powerful enough to lift water up to 25 feet vertically. When used on a level plane, it can move up to 80 gallons per minute. This sewage pump delivers a maximum force of 10.83 psi.

Continuous-Duty Motor for Reliable Performance

Behind the pump’s consistent performance is a continuous-duty split-capacitor motor. This 7.6 amp, 1/2-horsepower motor operates at speeds up to 1,750 rpm and can produce 912 watts of power. It is thermally protected and rated for 180 degrees Fahrenheit (82 degrees Celsius).

Cast Iron Design with Non-Clogging Vortex Impeller

Thanks to a dependable, non-clogging Vortex impeller made of cast aluminum, as well as rugged cast iron housing and base construction, this Superior Pump unit can be trusted to withstand continuous use in tough environments. For added durability, this pump features stainless steel fasteners and a baked-on powder-coat finish. Its tethered float switch relies on a wide-angle, mechanical, pump-mounted float that’s constructed of glass-reinforced nylon.

The 10-foot, water-resistant power cord makes it easy to connect the pump to a power source. This sewage pump is UL/C-UL listed and CSA certified for safety and dependability.

What’s in the Box

93501 sewage pump

See larger image.

93501 1/2-Horsepower Cast Iron Sewage Pump with Tethered Float Switch

At a Glance

• Powerful, 1/2-horsepower continuous-duty split-capacitor motor
• Handles 2-inch solids and high-capacity pumping
• Moves up to 80 gallons per minute
• Can push water up to 25 feet vertically
• Cast aluminum, non-clogging Vortex impeller
• Durable, cast iron housing and base for long life

1/2 hp 230V 2-Wire 4 inch water well submersible pump with 1-1/4 inch font discharge connection, includes built-in check valve, provides smooth water passages for maximum efficiency; stainless steel splined shaft; hermetically-sealed windings; self-healing resin system; integrated check valve; kingsbury-type thrust bearing; pressure equalizing diaphragm; removable water-bloc lead connector; NEMA mounting dimensions; stainless steel inlet screen; up to 11 gpm.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Bearing Pump Water 12 Hp, eg:

• What are Top 10 Bearing Pump Water 12 Hp for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Bearing Pump Water 12 Hp to buy?
• What are Top Rated Bearing Pump Water 12 Hp to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Bearing Pump Water 12 Hp?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Bearing Pump Water 12 Hp.
• Before deciding to buy any Bearing Pump Water 12 Hp, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Bearing Pump Water 12 Hp and What you should consider when buying the Bearing Pump Water 12 Hp and Where to Buy or Purchase the Bearing Pump Water 12 Hp. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Bearing Pump Water 12 Hp of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Bearing Pump Water 12 Hp.