Best Air Compressor For Plasma Cutter
Best results for best air compressor for plasma cutter
Forney Easy Weld 251 20 P Plasma Cutter
$399.99
$587.99
Amazon.com
Last update was on: November 23, 2024 11:27 pm
- CUTS- Mild steel, aluminum and stainless steel from thin material to 1/4"* (6.35 millimeters) with ease! *(Mild Steel)
- EASY TO USE- All you need is 120 volt power source and 1.5 CFM of compressed air. Built in regulator and air dryer make operation a breeze
- DRAG TORCH TECHNOLOGY- Allows you to drag cutting tip in direct contact with the metal you're cutting for smooth consistent clean cuts
- LIGHT AND PORTABLE- Forney's 120-volt 20 P Plasma Cutter is generator friendly so on the go cutting and moving to different job sites is possible
PRIMEWELD Premium & Rugged 50A Air Inverter Plasma Cutter Automatic Dual Voltage 110/220VAC 1/2" Clean Cut Portable
$299.00
$403.65
Amazon.com
Last update was on: November 23, 2024 11:27 pm
- THE ULTIMATE PLASMA CUTTER - When precision metalwork cuts matter. As one of our customers said, “It will do the job very well I have had mine for almost three years and it's been very reliable.” Our 50 Amp Digital Air Inverter Plasma Cutter handles cuts up to 1/2" (Max Severance Thickness: 3/4") with ease. Designed for both demanding industrial and construction work, or home and hobby use.
- MAKES THE PRECISION CUTS YOU NEED - With your Prime Weld Plasma Cutter, you can cut stainless steel, alloy steel, mild steel, copper aluminum, and other metal materials without breaking a sweat. Have limited outlets? No problem. The diversity between 110v and 220v has you covered.
Product Name: Lotos LT3500 35Amp Air Plasma Cutter, 2/5 Inch Clean Cut, 110V/120V Input with Pre Installed NPT Quick Connector, Portable & Easy Quick Setup Metal Cutter
$195.00
$230.10
Amazon.com
Last update was on: November 23, 2024 11:27 pm
- ★ PORTABLE but POWERFUL--the Lotos LT3500 can easily cut up to 2/5”(10 mm) metal with ultimate portability weighing only 18lbs
- The LT3500 is an excellent choice for home DIY jobs and light duty small business projects.
- ★ QUICK Setup--the per installed NPT 1/4” industry type D plug allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The 110V input design allows the machine can easily connected to your existing 110v wall outlet. The whole machine can be setup quickly within 1 mins.
REBOOT Plasma Cutter 50Amps,110/220V Dual Voltage Plasma Cutting Machine Compact Metal Cutter AC 1/2" Clean Cut Inverter Cutting for Home DIY
$299.99
$332.99
Amazon.com
Last update was on: November 23, 2024 11:27 pm
- Automatic 110/220V DC Dual Voltage 50A output 60% Duty Cycle Air Plasma Cutter( no compressor inside)
- On 220V Carbon steel Max Rated Clean Cut Thickness: 1/2"(12mm). Max Severance Thickness: 3/5"(15mm) Under 110V Clean Cut Thickness : 3/8 ‘’(9mm) output current 30A.
- Cutting Material: Stainless steel, Alloy steel, Mild steel, Copper, Cast Iron and Chrome. We Offer 30-Day 100% Satisfaction or Money Back Guarantee and 1 Year Limited Warranty
SUPER DEAL DC Inverter Plasma Cutter Welding Machine With Screen Display Dual Voltage 110/220V AC 1/2” Clean Cut (CUT 50)
$202.99
$280.13
Amazon.com
Last update was on: November 23, 2024 11:27 pm
- 【Superior performance】SUPER DEAL plasma cutter features PRO technology, more stable performance. High duty cycle result in less power consumption. More economical and effcient than the traditional cutting machine due to the high speed, high temperature and high energy plasma draught.
- 【Exquisite workmanship】 Made of heavy duty iron. Its solid material construction makes it reliable and gives it strength that can be used for a long time. It not only can be used in businesses and DIY users, but also fully accommodating the demands of professional operators.
3/8" in LINE Desiccant AIR Dryer for Compressed AIR Great for Pneumatic Tools Spray Booth Plasma Cutter
$39.85
$59.38
Amazon.com
Last update was on: November 23, 2024 11:27 pm
- 3/8" In-Line Desiccant Dryer with Beads, Clear Polycarbonate Bowl to check bead moisture at a glance
- 5oz Poly Bowl, 3/8 Female NPT Inlet and Outlet, Aluminum Quick Release Bowl Guard
- Beads turn from Blue to Pink when time to be changed.
- In-Line Desiccant Dryers are designed to remove moisture from your airlines.
CrocSee C1.8C.027 1/4" NPT Thread 26CFM Automatic Drain Air Compressor Compressed In Line Particulate Moisture Water Trap Filter Separator with Mount
$15.50
$20.62
Amazon.com
Last update was on: November 23, 2024 11:27 pm
- Max.Flow Rate: 26 CFM (750 L/Min), Particulate filtration: 40 micron
- 1/4" Female NPT Air Inlet & Outlet port
- Working Pressure: 45PSI - 145PSI, Max. Working Temperature:140°F( 60°C)
- With a wall mounting bracket(Screws are not included)
- If the item you have received is defective in any way, please message us for 100% satisfaction and RISK FREE warranty: 1 year free replacement or full refund without return.
Lotos LT5000D Plasma Cutter 50Amps Dual Voltage Compact Metal Cutter 110/220V AC 1/2" Clean Cut
$318.72
$407.96
Amazon.com
Last update was on: November 23, 2024 11:27 pm
- ★ Air PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
- ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
- ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LT5000D Plasma Cutter are "LCS22" or "LCS33". Please search "Lotos LCS22" or "Lotos LCS33"
Lotos LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown
$418.16
$614.70
Amazon.com
Last update was on: November 23, 2024 11:27 pm
- ★ NON-TOUCH PILOT ARC PLASMA CUTTER: efficiently cuts through rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
- ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
Jewboer 2-pack Air Compressor Filter Oil Water Separator Air Dryer for Spray Gun Plasma Cutters Air Tools Air Line 1/4" NPT Inlet and Outlet,with Quick Connector
$15.99
$18.07
Amazon.com
Last update was on: November 23, 2024 11:27 pm
- Eliminates water,oil,dust and particles in air line from air compressor
- Mainly suitable for paint spray gun and air compressor,matched used with gun,pneumatic tools and hoses
- Stops water vapor and particles from entering air tools and extends tool life
- Universal 1/4"NPT inlet and outlet design easily connects air line with air tools and spray guns
- Condensation exhaust valve is included in this product,Air Pressure:90 PSI
Hypertherm 088096 Powermax 30 AIR Hand System with 15′ Lead
$1,795.00
$2,620.70
Amazon.com
Last update was on: November 23, 2024 11:27 pm
- Operate it anywhere with the internal air compressor
- Plug into any 120 or 240 V power with Auto-Voltage technology and included plug adapters
- Highly portable. The smallest, lightest weight system in its class
- New AIR T30 torch is rugged and designed to withstand the toughest environments
- Do more in less time. Fast cutting speeds and superior cut quality result in less secondary operations
Hobart 500565 Airforce 27i Plasma Cutter 120/240V
$1,168.99
$1,566.45
Amazon.com
Last update was on: November 23, 2024 11:27 pm
- Multi-Voltage plug (MVP) allows you to connect to 120 V or 240 V power.
- Excels at cutting 3/8 in mild steel, can sever 5/8 in mild steel
- Fan-On-Demand - Runs only when needed reducing dust/debris pulled into unit.
- More precise cut, thinner kerf, less slag to clean up. XT30R torch with 12 ft lead and consumables
- Wind Tunnel Technology - Prevents abrasive dust and particles from damaging internal components.Plasma Material Thickness: 1/4 inches to 3/8 inches
Hyperikon Plasma Cutter, 10 40 Amp, PT 31 LG40 Cutting Torch, 1/2 Inch Clean Cut
$238.95
$289.13
Amazon.com
Last update was on: November 23, 2024 11:27 pm
- ✔ IGBT INVERTER - Built by the latest IGBT inverter technology, the 110V plasma cutter is designed to produce 10-40A adjustable output power with a 45% duty cycle.
- ✔ BUILT IN PROTECTION - With a built-in over-heat protection and insulation class F it ensures safe operation at higher heat tolerance and voltage capacity. The included air regulator controls the air pressure at 75psi. Air compressor is not included.
Lotos CT520D 50 AMP Air Plasma Cutter, 200 AMP Tig and Stick/MMA/ARC Welder 3 in 1 Combo Welding Machine, ½ Inch Clean Cut, Brown
$397.00
$575.65
Amazon.com
Last update was on: November 23, 2024 11:27 pm
- ★ PLASMA CUTTER--50AMP Plasma Cutter Current Output
- Max Ideal Cut Thickness: 1/2"
- Max Severance Thickness: 3/4"
- Compact Plasma Cutter Has a Handle for Portability and Uses Non-Hazardous Compressed Air to Cut Stainless Steel, Alloy Steel, Mild steel, Copper, and Aluminum
- ★ TIG WELDER: 15-200AMP DC TIG Electric Current Output
- Quality TIG welding on Stainless or Steel and Precise Welding of Thinner-gauge Materials
Plasma Cutter, CUT50 50 Amp 110V/220V Dual Voltage AC DC IGBT Cutting Machine with LCD Display and Accessories Tools
$274.00
$328.80
Amazon.com
Last update was on: November 23, 2024 11:27 pm
- 【High Quality】Cut-50 50AMP plasma cutter is made of high quality components, By adopting the most Advanced inverter technical of switch power, as well as the Product life and work efficiency are increased by 30% than ordinary machines, smooth cutting surface
- 【Portable Design】 Compact plasma cutting machine with LCD digital display and equipped with a portable handle，It is very convenient to operate and carry
