Best Drill Bit Size For Tapping
Best results for drill bit size for tapping
AUTOTOOLHOME Combination Drill and Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6
$11.89
$14.98
Amazon.com
Last update was on: April 27, 2024 1:40 am
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel (HSS 4341) vs carbon steel for longer life
- Designed to tap up to 10-gauge metal
Migiwata Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bits with Straight Shank Set of 50pcs in 5 Sizes(1, 1.5, 2, 2.5, 3mm) to Cut Through Stainless Steel Cast Iron and Hard Metals
$15.69
$19.93
Amazon.com
Last update was on: April 27, 2024 1:40 am
- M35 Cobalt Steel - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- No Center Punch Needed - the 135° quick-cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander"
XT AUTO Spiral Flute Hss Combination Countersink Screw Tap Tapping Drill Bit Set 1/4" hex shank Hand Tool Kit for Wood Plank Aluminum Plate Sheet Iron
$9.99
$14.49
Amazon.com
Last update was on: April 27, 2024 1:40 am
- High Speed Steel - Made of high quality 4241 HSS for durability
- Suitable for drilling and tapping in aluminum, brass, copper, plastic, wood, steel, etc.
- Three Functions in One Bit ¨C Drill, tap and countersink in a single pass to save your labor and precious time
- The point is self-centering and eliminates the need for center drilling or center punching
- Hex Shank - Quick-change 1/4" (6.35mm) hex shank with SAE sizes engraved on the tap drills for easy recognition.
6Pcs/Set Hex Shank Drill Bits HSS 4341 Combination Drill and Tap Bit Screw Tap Deburr Countersink Bit (6-32NC 8-32 NC 10-32 NC 10-24 NC 12-24 NC 1/4-20 NC)
$13.99
$15.53
Amazon.com
Last update was on: April 27, 2024 1:40 am
- 6Pcs Hex Shank Drill Bits Set Inculued Size: 6-32NC (3.5mm), 8-32NC (4.2mm), 10-32NC (5mm), 10-24NC (5mm), 12-24NC (5.7mm), 1/4-20NC (6.35mm)
- Made of High-speed Steel 4341, Hard, Rustproof, Solid and Durable.
- Suitable for Low Hardness Materials Such as Wood, Aluminium Plate, Plank, Plastic, or Sheet Iron (thickness of less than 3mm).
- One-step Processing, Drilling, Tapping, Deburring and Countersinking in One Operation, Working Efficiently and Saving Time and Labor.
Wolfride 6Pcs 1/4 Hex Shank Combination Drill and Tap Bit Set Metal Deburr Countersink Drill Bit 1/8 inch-3/8 inch
$10.48
$12.05
Amazon.com
Last update was on: April 27, 2024 1:40 am
- The material is HSS 4341, high hardness, high wear resistance, high heat resistance tool steel.
- Suitable for fast drilling and tapping machining.
- Suitable for wood, aluminum, iron and other materials with low hardness.
- Better to be used in tapping machine rather than hand electric drill.
- 1/4 inch hex shank, 6 sizes in one set.
Greenlee DTAP1/4-20 Combination Drill and Tap Bit, 1/4-20NC
$10.83
$15.38
Amazon.com
Last update was on: April 27, 2024 1:40 am
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel vs carbon steel for longer life
- Designed to tap up to 10-gauge metal
COMOWARE Cobalt Drill Bit Set- 15Pcs M35 High Speed Steel Twist Jobber Length for Hardened Metal, Stainless Steel, Cast Iron and Wood Plastic with Indexed Storage Case, 1/16"-3/8"
$21.99
$29.69
Amazon.com
Last update was on: April 27, 2024 1:40 am
- HIGH QUALITY MATERIAL: 5% Cobalt High Speed Steel M35 provide extended tool life compared to ordinary drill bits. Durable and strong
- TWIST DESIGN & PERFORMANCE: PRECISE 135°SPLIT POINT, gold oxide finish and round straight shanks. Prevent walking, clear chips and particles faster.Produced by precision fully ground which ensures chips move smoothly.
- PROFESSIONAL & WIDELY USE: M35 Cobalt HSS is more suitable for hardened material. Particularly successful in cutting through hard metals such as stainless steel, cast iron, high temperature alloy, titanium alloy, hard plastics and woods, and also can be used for softer materials.
Spare Set Of 8 Bits for the Yankee Push Drill
$34.50
$50.72
Amazon.com
Last update was on: April 27, 2024 1:40 am
- EXTRA PARTS - Spare set Of 8 bits for our Yankee Push Drill
- COMPATIBLE WITH OTHER TOOLS - Fits most old Stanley Push Drills.
- FULL RANGE OF DRILLING - The 8 drill sizes are: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64"
- CLASSIC AND DURABLE - These are the original design - double fluted bits. Will drill a hole up to 1-1/2" deep
Bosch BL2161 17/32 In. x 6 In. Fractional Reduced Shank Black Oxide Drill Bit
$11.87
$13.06
Amazon.com
Last update was on: April 27, 2024 1:40 am
- Speed helix design for three times faster drilling than standard bits
- Last 50 percent longer than high-speed steel
- Easier drilling, reduced heat and extended drill bit life
- Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
- For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
Dry Drill Core Bits for Brick, Concrete Block, Masonry – 2" Diameter 5/8"-11 Threaded #30/40 Diamond Grit
$49.99
$70.49
Amazon.com
Last update was on: April 27, 2024 1:40 am
- #30/40 diamond grit for drilling soft brick, soft masonry, concrete block
- Diameter: 2 inches
- Thread: 5/8"-11 threaded
- Drilling depth: 9.5"
- High diamond concentration and quality guarantee longer coring life, solid poured concrete Not commended
Yakamoz 6PCS Drill Tap Combination Bit Set HSS Deburr Countersink Bit 1/4 Hex Shank Tool Kit | Imperial
$11.99
$17.63
Amazon.com
Last update was on: April 27, 2024 1:40 am
- High hardness, rustproof, solid and durable high-speed steel in Quick-change 1/4"(6.35mm) Hex Shank
- Complete hole drilling, tapping, deburring and countersinking in one operation save processing steps and time costs, improve working efficiency.
- Self-Centering point, do not need assistant center drilling or center punching.
- Ideal for drilling, tapping, cutting on wood, soft metal, aluminum plate, iron, etc. (Note: it can not work well with stainless steel 304 or high hardness metal. )
Greenlee DTAPKIT 6-32 to 1/4-20 6-Piece Combination Drill and Tap Set
Amazon.com
Last update was on: April 27, 2024 1:40 am
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel vs carbon steel for longer life
- Designed to tap up to 10-gauge metal
DEWALT DWADTQTR5SET Impact Ready 5-Piece Drill Tap Set, 1/4" Capacity
6 Pcs 1/4" HSS Spiral Hex Shank Combination Drill Screw Tap Bit Set (M3-M10) with Automatic Spring Loaded Center Punch Tool – Gold
$15.99
$17.91
Amazon.com
Last update was on: April 27, 2024 1:40 am
- Material: HSS (4341) High hardness, rustproof, solid and durable
- Self-centering design: do not need additional center drilling or center punching
- Fast replacement composite cone, uses drill edged principle. Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency.
- Metric: M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5.Shank:1/4 inch (6.35mm) hex shank
Greenlee DTAP5/16-18 Combination Drill and Tap Bit, 5/16-18NC
$6.47
$8.61
Amazon.com
Last update was on: April 27, 2024 1:40 am
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel vs carbon steel for longer life
- Designed to tap up to 10-gauge metal
Migiwata 4.2mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit Set of 10pcs with Straight Shank to Cut Through Stainless Steel Cast Iron and Other Hard Metals
$11.56
$15.72
Amazon.com
Last update was on: April 27, 2024 1:40 am
- Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- No center punch is needed—the 135° Quick-Cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander"
Bosch CO2135 1/8 In. x 2-3/4 In. Cobalt Drill Bit
$1.65
$1.82
Amazon.com
Last update was on: April 27, 2024 1:40 am
- Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF)
- Rigid, thick web design adds stability to bit in tough applications
- Surface hardened to penetrate tough abrasive materials
- Available in jobber length, full shank
- Best used for drilling into light-gauge metal, high-carbon steel, aluminum and ally steel, cast iron, stainless steel and titanium
Nxtop 6pcs Combination 1/4" Hex Twist Tap Drill HSS M3-M10 Bit Screw Countersink Hexagonal Handle Metric Taps White Diamond/Titanium Plated
$13.19
$17.67
Amazon.com
Last update was on: April 27, 2024 1:40 am
- Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc.
- Fast replacement composite cone, uses drill edged principle.
- Shank Dia: 6.35mm 1/4 Hex Shank
- Material: High speed steel
- Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency.
DEWALT DWADT1032 UNF Drill Tap, 10"-32"
#7 Jobber Drill Carbide Tipped 118° Standard Point, USA Made, Number 7 (.201"), 50386
$13.65
$16.93
Amazon.com
Last update was on: April 27, 2024 1:40 am
- 0.201" diameter carbide tipped jobber length drill 118° standard point
- 2 7/16" length of flute
- 3 5/8" overall length
- #7 size. Tool Diameter Tolerance: +0"/-.0007"
- Used by machinists and hobbyists for general purpose drilling of most materials.
