Best Drive Belts For Small Lathes
Best results for drive belts for small lathes
Grizzly T21992 Power Twist V-Belt, 1/2-Inch x 4-Foot
AUSPA 5ft Power Twist V-Belt, 1/2-Inch x 5 Feet (A Type)
$39.99
$54.39
Last update was on: October 31, 2024 2:20 pm
- Durable material – Special PU linked belt made by polyurethane and polyester composites
- Good performance on reducing vibration & Low elongation than other normal belt.
- Perfect for lathes, table saws, bandsaws and other woodworking tools
- Easy to install
- What you can get: 1x AUSPA V-Belt (1/2-Inch x 5 Feet)
Delta Industrial 46-460 12-1/2-Inch Variable-Speed Midi Lathe
$777.57
$940.86
Last update was on: October 31, 2024 2:20 pm
- Powerful 1 hp max, 1,725 rpm motor
- Large 12-1/2-inch swing capacity provides the largest capacity in its class. Drive spindle: 1 inch -8 RH TPI thread
- Electronic variable Speed with three-pulley speed ranges provide the required speeds needed to turn a project without changing belt position
- Forward and Reversing function allows the turner to achieve a superior finish. Sanding a turned piece with the grain causes the wood fibers to lay down and remain rough.
Jason Industrial 3L-Link-5 Accu-Link Adjustable Link V-Belt, 3L Profile, 3/8" Width, 5′ Length
NEW After Market Craftsman Drive Belt 30936.00 for Midi Wood Lathe 351217520 BELT
NEW URETHANE BELT RIKON MINI LATHE Model 70-995 & 70-100 12" Mini Lathe
3/16" After Market Round Urethane Drive Belt DRILL PRESS LATHECUSTOM MADE up to 35 Inches
2 Drive Belts Replace Sears Craftsman OR91721
$41.99
$62.57
Last update was on: October 31, 2024 2:20 pm
- Two new drive belts
- Replaces Sears Craftsman part number OR91721
- A real drive belts not that chinese made orange/clear urethane that cracks and falls apart
- Please, check your part number before purchase
- Follow the safety guidelines when installing parts
Century formerly AO Smith GF2054 1/2 hp, 1725 RPM, 115 volts, 48/56 Frame, ODP, Sleeve Bearing Belt Drive Blower Motor
WEN 4208 8 in. 5-Speed Drill Press
$86.86
$115.52
Last update was on: October 31, 2024 2:20 pm
- Includes a 1/2-inch keyed chuck and onboard key storage
- Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
- Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations
- Durable 1/3 HP induction motor develops ample torque and power
- 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
- Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.
Nova 1624 Lathe DVR Upgrade Motor (upgrade for both 1624 II and 1624-44)
$669.99
$904.49
Last update was on: October 31, 2024 2:20 pm
- Instant power when you need it (1.75/115v high torque motor)
- Senses inertia load & adjusts power to maintain set speed to within 2%. Huge variable range - low speed of 50 rpm right up to 5,500 rpm
- Super smooth operation and incredible torque
- Energy efficient - up to 50% power savings over conventional motors
- Simple Construction - it eliminates permanent magnets, brushes, and commutators.
MultiTool 36" x 2" Belt Grinding Attachment
$227.75
$252.80
Last update was on: October 31, 2024 2:20 pm
- EFFICIENT: Superior performance and a user-friendly belt change of under 5 seconds produce better quality with less downtime.
- VERSATILITY: Grinding, sanding or polishing in 4 positions on rubber contact wheel, flat paten, disc or free-strapping. The unit can be swiveled vertically or any position in between.
- ACCURATE TRACKING: The running position of the belt is simple to adjust and it stays there, allowing for quality finishing.