Best Makita Die Grinder 18V
Best results for makita die grinder 18v
Makita XDG01Z 18V LXT Lithium-Ion Cordless 1/4" Die Grinder, Tool Only
$121.25
$168.54
Amazon.com
Last update was on: November 24, 2024 11:34 am
- Compact barrel grip design and weighs only 4.4 lbs. for easy handling
- Slide switch with lock-on for operator convenience
- Vent slots designed to direct exhaust air away from the user
- L.E.D. light flashes red when it is time to recharge the battery
- Built-in L.E.D. protection circuit with over-torque control protects the motor
Makita XDG02Z 18V LXT 1/4" Compact Die Grinder
$158.54
$225.13
Amazon.com
Last update was on: November 24, 2024 11:34 am
- Makita-built 4-pole motor delivers 26,000 revolutions per minute for faster grinding
- Short neck design is only 12-1/8" long with battery (not included) for increased maneuverability
- Compact barrel grip design with rubberized soft grip allows for easy grinding in various orientations
- Vent slots designed to direct exhaust air away from the user
- Slide switch with lock-on capability for continuous operation
Makita LXDG01 18V LXT Lithium-Ion Cordless 1/4 inch Die Grider Kit (Discontinued by Manufacturer)
$369.99
$525.39
Amazon.com
Last update was on: November 24, 2024 11:34 am
- Makita-built motor delivers 25,000 RPM for faster grinding
- Compact barrel grip design and weighs only 4.4 lbs. for easy handling
- Slide switch with lock-on for operator convenience
- Built-in L.E.D. protection circuit with over-torque control protects the motor
- Tool not equipped with Star Protection- only compatible with Makita 18V LXT 3.0Ah battery (BL1830)
- Makita built motor develops 25 RPM's for faster grinding
Makita GD0801C 1/4-Inch SJS Die Grinder
$245.99
$292.73
Amazon.com
Last update was on: November 24, 2024 11:34 am
- Electronic Controller for Operator Convenience
- Powerful 6.6 AMP motor delivers 7,000-29,000 RPM for faster material removal
- Super Joint System - SJS technology helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to a stop
- Variable speed control dial enables user to match the speed to the application
- Constant speed control automatically applies additional power to the motor to maintain speed under load
Makita XMT03Z 18V LXT Lithium-Ion Cordless Multi-Tool, Tool Only
$99.00
$135.63
Amazon.com
Last update was on: November 24, 2024 11:34 am
- 18V LXT Lithium-Ion battery provides up to 20 minutes of continuous run time
- Variable speed control dial (6,000-20,000 OPM) enables user to match the speed to the application
- 3.2Degree oscillation angle engineered for faster, more aggressive cutting and sanding
- Large on/off slide switch with lock-on button for operator convenience
- Tool-less clamp system for fast accessory installation
Makita 9005BZ 9-Amp 10000 RPM AC/DC Angle Grinder, 5-Inch
Makita A-95037 TCT Saw Blade 5-3/8-inch by 5/8-inch by 30T
$28.23
$36.42
Amazon.com
Last update was on: November 24, 2024 11:34 am
- TCT Saw Blade 5-3/8"X5/8"X30T
- Ultra thin-kerf design for lighter cutting load and less wasted material
- Specially designed for cordless saws to permit more cuts per charge
- Individually hand-hammered by skilled saw technicians for guaranteed flatness and proper tension to make the perfect cut
- For use with model #BCS550 18V LXT 5-3/8-in Metal Cutting Saw
Makita CB440 Carbon Brush Set
Makita 196846-1 Dust Extracting Tuck Point Guard, 5"
$55.99
$63.27
Amazon.com
Last update was on: November 24, 2024 11:34 am
- Easily adjustable depth setting for quick changes
- Adjustable depth stops for added user convenience
- Clear viewing window for improved visibility
- Plunge feature allows for maximum material removal
- Includes hose holder that attaches to the grinder power cord for easy routing
Makita 10 Pack – 4.5" Cut Off Wheels For Grinders – Aggressive Cutting For Metal & Stainless Steel/INOX – 4-1/2" x .045 x 7/8-Inch
$19.99
$23.79
Amazon.com
Last update was on: November 24, 2024 11:34 am
- ✅ 10 MAKITA Premium 4-1/2” Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor
- ✅ CUT 2-3X MORE than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup
Makita GD0601 1/4-Inch Die Grinder
$106.36
$147.84
Amazon.com
Last update was on: November 24, 2024 11:34 am
- Powerful motor with fixed 25,000 RPM No Load Speed
- Easy-to-handle at only 3.7 lbs.
- Protective zig-zag varnish seals the armature from dust and debris for longer tool life
- Solid aluminum housing with stepped neck for added durability
- Vent slots designed to direct exhaust air away from the user
Makita XAG04Z 18V LXT Lithium-Ion Brushless Cordless 4-1/2” / 5" Cut-Off/Angle Grinder, Tool Only
$98.49
$128.04
Amazon.com
Last update was on: November 24, 2024 11:34 am
- Automatic speed change technology adjusts speed and torque during operation for optimum performance
- Active feedback-sensing technology (aft) turns the motor off if rotation of the wheel is suddenly forced to stop
- The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
- Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
Makita XLT01Z 18V LXT Lithium-Ion Cordless Angle Impact Driver
$169.00
$206.18
Amazon.com
Last update was on: November 24, 2024 11:34 am
- Ideal for Fastening in Close Quarters
- Makita-built motor delivers 530 in.lbs. of Max Torque
- Variable speed (0-2,000 RPM & 0-3,000 IPM) for a wide range of fastening applications
- Compact 2-1/8" angle head height for use in close quarters
- Large paddle switch with soft grip provides increased comfort
Makita GD0603 1/4" Compact Die Grinder
$110.00
$137.50
Amazon.com
Last update was on: November 24, 2024 11:34 am
- Powerful 2.2 amp motor delivers 28, 000 RPM to handle unique applications
- Compact design with small 2-1/2" diameter barrel
- weighs only 2.1 lbs. For added comfort
- Contoured Neck grip provides a secondary hand position for increased maneuverability
- Round-shaped collet nut is designed to help prevent damage/scratches to workpiece
- Powder coated field protects the motor from dust and debris for longer tool life
YUFUTOL Carbide Burr Set – 10pcs Double Cut Solid Carbide Rotary Burrs 3mm(0.118”) Shank Fits Die Grinder Drill for Woodworking,drilling Metal Carving Engraving Polishing
Amazon.com
Last update was on: November 24, 2024 11:34 am
- 【Quantity】10 pieces Double Cut Solid Carbide Rotary Burr Set, 3mm(0.118) inch shank , fits dremel and most small rotary tools
- 【Durable】 Made of heat-treated durable double cut carbide that lasts long working life, packed with nice plastic case for safety storage and protection
- 【Versatile】Excellent for fine detail work,widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding,ect
Makita 743081-8 5-Inch Round Hook and Loop Backing Pad (8-hole)
$18.82
$26.91
Amazon.com
Last update was on: November 24, 2024 11:34 am
- N/A
- Imported
- Standard replacement pad for BO5030/K, BO5031K, BO5041K
- Efficient 8-hole pad works with sanders that have dust collection system
- High quality rubber pads engineered to provide smooth finishes
- Built-in aggressive mounting thread for increased abrasive paper grip
MTP 5 inch Diameter 8 Hole Sander Hook and Loop Pad Replaces Makita Part Number 743081-8, 743051-7 and Hitachi Part Number 324-209 (1 pk)
Makita GA6010ZX2 6-Inch Cut-Off/Angle Grinder
$179.99
$217.79
Amazon.com
Last update was on: November 24, 2024 11:34 am
- 10.5 AMP motor delivers 10,000 RPM
- Refined design at only 5.9 lbs.
- Labyrinth construction, zig-zag varnish and thicker coil wires for longer tool life
- Externally accessible brushes for greater serviceability
- Both cutting/grinding wheels & guards, side handle, inner flange, lock-nut and wrench
Makita 9005B 5-Inch Angle Grinder
$139.15
$189.24
Amazon.com
Last update was on: November 24, 2024 11:34 am
- Powerful 9 amp motor yet light weight for high production work with less fatigue
- Ball bearing construction for long tool life
- Removable side handle can be installed on either side of tool for operator comfort
- Spindle lock for easy accessory changes
- AC/DC for use with alternative power sources
