Best Rotary Drill Operator Jobs
Best results for rotary drill operator jobs
Makita HR2641 1" AVT Rotary Hammer, Accepts Sds-Plus Bits (D-Handle)
$179.00
$234.49
Amazon.com
Last update was on: May 3, 2024 11:09 am
- Powerful 8 amp motor delivers 2.1 ft.Lbs./2.9 J. Of impact energy to handle the most demanding applications
- Anti-vibration technology (AVT) is an internal counterbalance system that greatly reduces vibration by moving a counterweight in the opposite direction of the drive PISTON
- Integrated damper spring at the base of the impact bolt is engineered to absorb impact vibrations from the drill bit
- Recessed hammer function selector located below gear housing for improved durability
Makita XRH06ZB 18V LXT Lithium-Ion Sub-Compact Brushless Cordless 11/16" Rotary Hammer, Accepts Sds-Plus Bits, Tool Only
$199.00
$266.66
Amazon.com
Last update was on: May 3, 2024 11:09 am
- Brushless motor delivers 0-680 RPM, 0-4, 800 BPM and .88 ft.Lbs./1.2 Joules of impact energy for faster drilling
- Compact and ergonomic design at only 10-3/4"
- Weighs only 4.6 lbs. With battery (battery not included) for reduced operator fatigue
- Vibration absorbing handle Moves independently of the motor and hammer mechanism for increased operator comfort
- The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
Makita XRH06RBX 18V LXT Lithium-Ion Sub-Compact Brushless Cordless 11/16" Rotary Hammer Kit, accepts SDS-PLUS bits, 65 Pc. Accessory Set (2.0 Ah)
$359.00
$398.49
Amazon.com
Last update was on: May 3, 2024 11:09 am
- Brushless motor delivers 0-680 RPM, 0-4, 800 BPM and .88 ft.Lbs./1.2 Joules of impact energy for faster drilling
- Compact and ergonomic design at only 10-3/4"
- Weighs only 4.6 lbs. With battery for reduced operator fatigue
- Vibration absorbing handle Moves independently of the motor and hammer mechanism for increased operator comfort
- For dust management use dust extraction cup (198362-9) with side handle SPACER (122810-6), side handle base (450120-4) and bolt (921919-9)
Makita XRH04T 18V LXT Lithium-Ion Cordless 7/8" Rotary Hammer Kit, Accepts Sds-Plus Bits (5.0Ah)
$396.36
$463.74
Amazon.com
Last update was on: May 3, 2024 11:09 am
- Makita-built variable speed motor delivers 0-1, 200 RPM and 0-4, 000 BPM
- 3-Mode operation for "rotation only", "Hammering with rotation" or "Hammering only" for multiple applications
- Built-in clutch reduces gear damage by automatically disengaging gears if bit binds
- Faster drilling with synchronized RPM and BPM
- Job site tested shock absorbent handle protects the battery housing for extra durability
Makita CX200RB Sub-Compact Brushless Cordless
$157.84
$213.08
Amazon.com
Last update was on: May 3, 2024 11:09 am
- Driver-drill weighs only 2.8 lbs. With battery for reduced operator fatigue
- Compact and ergonomic design at only 6-3/8" long
- Mechanical variable 2-speed transmission (0-500 & 0-1,700 RPM) for a wide range of drilling and driving applications. Variable 2-speed (0-1,300/0-3,000 RPM & 0-1,600/0-3,900 IPM) for a wide range of fastening applications
- BL Brushless motor delivers 350 in. Lbs. Of max torque
OSIDU 8Pcs Tungsten Carbide Rotary Burr Set 1/4-Inch Shank for Rotary Drill Die Grinder Head Carbide File Cutter Taper Points Burrs Metal Polishing Carving Bit Power Tools Double Cut
$38.59
$47.85
Amazon.com
Last update was on: May 3, 2024 11:09 am
- 8 Pcs Double cut carbide rotary point burr set, Shank Diameter: 6mm (about 1/4'') 0.236 inches, fits most pneumatic tool power tool die grinder bits
- Carbide rotary burrs set,fits most,metal working mold and pattern making,die sinking,can process a variety of high-precision mold cavity,long service life,applies in the cast iron,cast steel,carbon steel,alloy steel,stainless steel,copper,aluminum,and other metals
Makita XSS02Z Circular Saw
3M 01397 Green Corps Roloc Green Disc
Gardus RLE202 LintEater Rotary Dryer Vent Cleaning System, Removes Lint & Extends Up to 12’ with 4 Flexible 3′ Rods, Includes Bonus Lint Trap Brush, Blockage Removal Tool, Vacuum & Dryer Adapters
$29.80
$41.42
Amazon.com
Last update was on: May 3, 2024 11:09 am
- Most valuable tool you can own to ensure the safe operation of your clothes dryer
- Reduce drying times and save money on utility bills while ensuring the safety of your home
- Easy to use with your cordless drill and provides a means for regular cleaning of your dyer vent system
- Included adapters enable you to use the air from the clothes dryer, shop vacuum or electric blower to completely remove lint from the vent while rotary cleaning at the same time
3M 01398 Green Corps Roloc Green Disc
SDS Rotary Hammer Kit, 7A @ 120V
$259.00
$367.78
Amazon.com
Last update was on: May 3, 2024 11:09 am
- Power Tools and Accessories
- Country of manufacture: China
- Manufacturer: Makita
- Using carbon brushes helps to make the service life last longer
- 0-1,100RPM & 0-4,500 BPM for demanding applications
- Recessed lock-on button for continuous use
Makita XRH01Z 18V LXT Lithium-Ion Brushless Cordless 1-Inch Rotary Hammer Accepts SDS-PLUS Bits
$278.95
$351.48
Amazon.com
Last update was on: May 3, 2024 11:09 am
- Efficient BL Brushless Motor
- Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
- Compact and ergonomic design at only 12-7/8" long
- Weighs only 7.2 lbs. with battery (battery not included) for reduced operator fatigue
Makita HR4041C 1-9/16" Rotary Hammer, accepts Spline bits
$416.00
$511.68
Amazon.com
Last update was on: May 3, 2024 11:09 am
- Powerful 11 AMP motor delivers 6.8 ft.lbs. of impact energy to handle the most demanding applications
- Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
- Soft start suppresses start-up reaction for increased accuracy
- Variable speed control dial enables user to match the speed to the application for greater versatility
Makita XRH05Z 18V X2 LXT Lithium-Ion (36V) Cordless 1-Inch Rotary Hammer, accepts SDS-PLUS bits, Tool Only
$353.62
$512.75
Amazon.com
Last update was on: May 3, 2024 11:09 am
- 18 Volt Solution for Corded Power Demands
- Two 18V LXT Lithium-Ion batteries deliver the power and run time for corded demands without leaving the 18V LXT platform
- Makita-built motor delivers 0-1,250 RPM, 0-5,000 BPM and 3.0 Joules of impact energy for fast drilling
- Vibration-absorbing handle engineered for increased operator comfort
- Ergonomic soft-grip handle and large 2-finger trigger provide increased comfort on the job
DEWALT 20V MAX Combo Kit, Compact 4-Tool (DCK423D2)
$279.00
$320.85
Amazon.com
Last update was on: May 3, 2024 11:09 am
- DCD780 20V MAX* 1/2" drill/driver features two speed transmission(0-600/0-2000RPM)
- DCS381 20V MAX* reciprocating saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft
- DCS393 20V MAX* circular saw with 6-1/2" carbide blade can cut 2x4's at a 45-degree angle in a single pass
- DCL040 20V MAX* LED worklight delivers 110 lumens of light output
- Includes 2) 20v MAX* Batteries.Number of Tools:4
Makita XDS01Z 18V LXT Lithium-Ion Cordless Cut-Out Saw, Tool Only
$136.16
$170.20
Amazon.com
Last update was on: May 3, 2024 11:09 am
- Makita-built variable speed motor delivers 0-6,000 strokes per minute for faster and more efficient cutting
- Designed to cut openings in installed board with an adjustable blade depth up to 1-3/16" (9/16" in wood)
- Cuts up to 984 feet of 1/2" drywall on a single charge using 4.0Ah battery BL1840B (battery not included)*
- Short 1/4" stroke length with adjustable blade depth helps prevent damage to objects behind the board being cut
Makita 9237CX3 Makita 7" Polisher, 10 AMP, 600-3,000 RPM, var. spd., loop handle with foam pad and bag, ,
$212.95
$253.41
Amazon.com
Last update was on: May 3, 2024 11:09 am
- Variable speed dial and trigger enables user to match the speed to the application
- Constant speed control maintains constant speed under load. No Load Speed (variable speed) : 0 - 3200 RPM
- Soft start for smooth start-ups and less fling off of polish, wax or paste
- Rubberized loop handle and gear housing for operator comfort and to help protect delicate surfaces from damage
- Wire mesh intake covers to prevent wool fibers from entering the motor.Amps:10
Makita BO5041 3-Amp 4000-12000 OPM D-Handle Random Orbit Sander, 5-Inch
$62.37
$79.21
Amazon.com
Last update was on: May 3, 2024 11:09 am
- More Power for Faster Sanding and a Smooth Finish
- Smooth and fast sanding with 3.0 AMP motor
- Variable speed control dial (4,000-12,000 OPM) enables user to match the sanding speed to the application
- Ergonomic rubberized palm grip and handle for improved operator comfort and control
- Adjustable front handle allows for sanding in corners and confined areas
- Smooth and fast sanding with 3.0 AMP motor
Makita BO5030K 5" Random Orbit Sander
$69.13
$90.56
Amazon.com
Last update was on: May 3, 2024 11:09 am
- Smooth and fast sanding with 3.0 amp motor (12, 000 OPM)
- Rubberized grip for improved operator comfort and control
- Large 1/8" Random orbit action for fast and super smooth sanding
- Includes: 1 ea.abrasive discs (#120
- 794520-1),dust bag(166078-4) and plastic case (824566-2)
Drill Brush – Ultimate Car Wash Kit – Cleaning Supplies – Car Carpet – Truck Accessories – Wheel Brush – Motorcycle Accessories – Car Mats – Spin Brush – Interior Leather, Vinyl, Upholstery, Fabric
$25.95
$38.67
Amazon.com
Last update was on: May 3, 2024 11:09 am
- Drillbrush has assembled the Ultimate Automotive Detailing Power Brush Kit. Suitable for Cars, Trucks, Motorcycles, Boats, Watercraft, ATVs, and RVs. Clean, Scrub, and detail with this 6 (six) brush kit
- Included: The Original Drillbrush Power Scrubber in soft white, a MINI Original, a 5-inch diameter, a 4-inch diameter, 2-inch diameter short bristle, and a 2-inch long bristle brush (all in soft white). All six (6) brushes feature rugged steel shafts with quarter inch quick change ends, allowing use with half-inch drills, three-eighths drills, AND quick-change drivers
