Top 9 Shark Rigs Fishing

This Listing is for our 16/0 carbon steel inline circle hook shark rig (270# test, 7×7 49 strand construction bright stainless steel cable). Our circle hook shark rigs start with an eleven foot piece of 49 strand stainless steel cable and are double crimped with brass sleeves to a commercial carbon steel circle hook and 4/0 Rosco Brass Swivel. The finished rig is just over ten feet long which keeps most sharks far enough away from your mainline but is manageable enough at the side of the boat. Like all of our rigs, each one is made by hand in the USA. A key feature to all Cardinal Tackle Shark Rigs is the protected connections. After double-crimping the hook and swivel, we cover it with a short length of heat shrink tubing. The heat shrink tubing: (1) in the event of a tangle or crossed liens, it prevents frayed ends of shark wire cutting up your monofilament | (2) helps protect your hands when leadering or even just changing baits | (3) less damage to soft baits if you bury the hook | (4) cuts down on nasty pieces of old bait fish stuck to your rig if you have to put it away for another trip. This non-stainless, non-offset, circle hook shark rig is New York E. C. L. § 13-0338 compliant.

The Aqua Clear SH-10 Shark Surf Rig comes 32 inches in length, #100 test double crimped leads

Specification:

Type: Shark Rig

Test: 400lb

Quantity: 1pack/2packs

Material: Stainless Steel+Nylon

Features:

1. Well made ready rig and good value. Tooth guard. Very heavy duty. Large hook

2. 400lb nylon coated stainless steel cable, strong and sturdy

3. Hand-tied and machine crimped for strength, shrink-wrapped for abrasion resistance

4. If you are looking for some rigs for the big boys, you have to buy this/try this.

Note:

The Hooks Are Really Sharp, so Care Should Be Taken When Handling Them.

DO NOT Put it on the Place Where Children Can Take it Easily.

This Listing is for our 18/0 carbon steel inline circle hook shark rig (480# test, 7×7 49 strand construction bright stainless steel cable). Our circle hook shark rigs start with an eleven foot piece of 49 strand stainless steel cable and are double crimped with brass sleeves to a commercial carbon steel circle hook and 4/0 Rosco Brass Swivel. The finished rig is just over ten feet long which keeps most sharks far enough away from your mainline but is manageable enough at the side of the boat. Like all of our rigs, each one is made by hand in the USA. A key feature to all Cardinal Tackle Shark Rigs is the protected connections. After double-crimping the hook and swivel, we cover it with a short length of heat shrink tubing. The heat shrink tubing: (1) in the event of a tangle or crossed liens, it prevents frayed ends of shark wire cutting up your monofilament | (2) helps protect your hands when leadering or even just changing baits | (3) less damage to soft baits if you bury the hook | (4) cuts down on nasty pieces of old bait fish stuck to your rig if you have to put it away for another trip. This non-stainless, non-offset, circle hook shark rig is New York E. C. L. § 13-0338 compliant.

This Listing is for our 20/0 carbon steel inline circle hook shark rig (480# test, 7×7 49-strand construction bright stainless steel cable). Our shark rigs start with an eleven foot piece of 49 strand stainless steel cable and are double crimped with brass sleeves to a commercial carbon steel circle hook and 4/0 Rosco Brass Swivel. The finished rig is ten feet long which keeps most sharks far enough away from your mainline but is manageable enough at the side of the boat. Like all of our rigs, each one is made by hand in the USA. A key feature to all Cardinal Tackle Shark Rigs is the protected connections. After double-crimping the hook and swivel on our benchtop press, we cover it with a short length of heat shrink tubing. The heat shrink tubing: (1) in the event of a tangle or crossed liens, it prevents frayed ends of shark wire cutting up your monofilament | (2) helps protect your hands when leadering or even just changing baits | (3) less damage to soft baits if you bury the hook | (4) cuts down on nasty pieces of old bait fish stuck to your rig if you have to put it away for another trip. Folks also use these rigs for land based shark fishing with a heavy monofilament leader. This non-stainless, non-offset, circle hook shark rig is New York E. C. L. § 13-0338 compliant.

5′ bite leader with carbon steel circle hook can be used for shark, grouper, halibut, or any other big game species that needs protection from bite offs. All of our tackle is hand made in the USA and built on calibrated bench crimpers.

The Aqua Clear SH-11C Shark Surf Rig Lure is designed to reel in sharks. This rig lure comes with a fish finder and 100-pound double crimped leads. The Aqua Clear SH-11C Shark Surf Rig Lure measures 32-Inch.

End Game Tackle Shark Rigs are made with the highest quality components. We source American made swivels and leader material and only use genuine Mustad hooks. All of our shark rigs are made with a calibrated bench crimper to ensure proper crimping. These rigs have been successfully used by land based shark fisherman or by boat fisherman alike. The coastlock snap slides freely on the 10′ section of 400lb leader material. All of our rigs come in a resealable bag.

This listing is for one large land based shark rig with 18/0 carbon steel inline circle hook, 480# stainless steel cable and 400# monofilament. Our land based shark rigs are the perfect combination of stainless steel cable and monofilament. Each 5.5 foot lower leader uses 7×7 49 strand construction bright stainless steel cable double crimped with brass sleeves to a commercial carbon steel circle hook and 4/0 Rosco brass swivel. After double-crimping the hook and swivel, the lower leaders connections are protected with a short length of heat shrink tubing. Each 15 foot upper leader 400# blue smoke monofilament crimped to a heavy duty snap swivel and 4/0 Rosco brass swivel. The upper and lower leaders are attached at the snap swivel, which is also the perfect spot to add your weight. The finished rig is over 15 feet long. Like all of our rigs, each Land Based shark rig is made by hand in the USA. This non-stainless, non-offset, circle hook shark rig is New York E. C. L. § 13-0338 compliant.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Shark Rigs Fishing, eg:

• What are Top 10 Shark Rigs Fishing for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Shark Rigs Fishing to buy?
• What are Top Rated Shark Rigs Fishing to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Shark Rigs Fishing?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Shark Rigs Fishing.
• Before deciding to buy any Shark Rigs Fishing, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Shark Rigs Fishing and What you should consider when buying the Shark Rigs Fishing and Where to Buy or Purchase the Shark Rigs Fishing. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Shark Rigs Fishing of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Shark Rigs Fishing.