Best Short Replacement Office Chair Cylinder
Nowadays, there are so many products of short replacement office chair cylinder in the market and you are wondering to choose a best one.You have searched for short replacement office chair cylinder in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings short replacement office chair cylinder which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Best results for short replacement office chair cylinder
MySit 2.2" Stroke Office Chair Gas Lift Cylinder Replacement | 5-Year Warranty Heavy Duty Shortest Gas Spring Rod Chair Part Sinking 1.2 inches Universal Size Black for Short Person
$24.99
$37.24
Amazon.com
Last update was on: May 3, 2024 11:34 am
- Sink：1.2 inch （3 cm） Fit most of chairs. No worry about the height of the chair foot.
- Class 4 level, Top Quality Level, Heavy Duty Construction, Specialized for Heavy Person,BIFMA Plus Quality
- Height Adjustable range: 2.2 inches, outside Cylinder bottom shrinkage make task chair minimum seat height shorter.
- Outer tube diameter is 2 Inches, fit for 2 Inches Base holes. Please measure your old gas cyclinder size for reference, in case of diameter not fit or too short / too tall/ touch the floor. or contact seller for suggesttion.NOT FIT 40mm Diameter Base Hole.
Replacement Short Office Executive Chair Gas Lift Cylinder Pneumatic Shock – Short Size – 3" Travel / Adjustment Range – S6103
$14.79
$16.86
Amazon.com
Last update was on: May 3, 2024 11:34 am
- 2" wide - will fit most chair bases
- 7.25" wide black lower support column (larger diameter black tube)
- 3" of piston travel / stroke (up & down)
- 12" (307mm) total overall length when fully extended
- Ideal to replace shorter gas cylinders on most office chairs and executive chairs, including those purchased at office supply stores
Works well as a replacement for damaged or worn out gas lifts on office chairs, task chairs, executive chairs, stools, etc. -The shorter profile of this cylinder is ideal for chairs with a larger tilt mechanism or a taller profile base. – Always remove old gas lift cylinders with care – never puncture or heat.
Gas Lift Cylinder, Oak Leaf Office Chair Gas Lift Cylinder Replacement, Pneumatic Shock Heavy Duty (450 lbs) Office Chair Parts & Universal Size, 5” Stroke, Black
$16.49
$18.30
Amazon.com
Last update was on: May 3, 2024 11:34 am
- STANDARD CYLINDER DIAMETER: Outer cylinder: 2 inches, Inner cylinder: 1.1 inches. Please confirm the measurement before ordering.
- DESIGNED TO BE HEAVY DUTY: Holds up to 450 lbs on most office, executive and computer chairs.
- 5'' STROKE FOR ADJUSTING CHAIR HEIGHT: Minimum length: 10.5 inches
- maximum length when fully extended: 15.5 inches
- adjustable range: 5 inches
- SMOOTH &
DOZYANT Gas Lift Cylinder, Office Chair Gas Lift Cylinder Replacement,Hydraulic Pneumatic Shock Piston Heavy Duty (450 lbs) Universal Size Fits Most Executive Chairs, Highest End Class 4
$13.01
$14.57
Amazon.com
Last update was on: May 3, 2024 11:34 am
- HEAVY DUTY Gas lift cylinder that holds great weights - tall center support column of the chair. Holds up to 450 lbs on most office, executive and computer chairs. Highest End Class 4 gas cylinder on market.
- STANDARD CYLINDER DIAMETER: Outer cylinder: 2 inches, Inner cylinder: 1. 1 inches. Please confirm the measurement before ordering.
- SMOOTH & NOISELESS: Full 360 degree rotation, smooth and noiseless movements to all directions
Rolland Office Chair Gas Lift Cylinder – Universal Size Fit All – Heavy Duty – Black
$14.98
$20.52
Amazon.com
Last update was on: May 3, 2024 11:34 am
- Outer cylinder diameter: 2 inches, Inner cylinder diameter: 1.1 inches
- Minimum length: 10.5 inches
- Maximum length when fully extended: 15.5 inches
- Adjustable range: 5 inches
- Heavy duty weight rating: 320 lbs. / 5 years manufacturer warranty
chairpartsonline Replacement Drafting Stool Gas Lift Cylinder Pneumatic Shock – Medium Stool Height – S6115
$36.99
$40.69
Amazon.com
Last update was on: May 3, 2024 11:34 am
- 2" (50mm) wide x 12.4" (315mm) tall main support tube column will fit most chair bases (larger diameter black tube)
- 8" piston stroke adjustment range (up & down)
- 22.25" (565mm) total overall extended length
- Black
- Ideal to replace gas cylinders on most tall task chairs, drafting chairs, and stools, including those purchased at office supply stores.
OFFICE FACTOR, Office Chair Gas Lift Cylinder Replacement, Heavy Duty 450 Lbs Weight Capacity, Fits Most Executive Chairs (The Hole of Your Base Must be 2 inches Wide)
$29.90
$40.07
Amazon.com
Last update was on: May 3, 2024 11:34 am
- THIS CYLINDER IS NOT COMPATIBLE WITH HERMAN MILLER CHAIRS
- fit most executive, computer and desk chairs sold across the US and Canada, 450 LBS WEIGHT CAPACITY
- ADJUSTABLE RANGE: 5 INCHES, OFFICE CHAIR CYLINDER
- HIGHEST END CLASS 4, 5 Years Warranty Satisfaction Guarantee
- MAKE SURE THE CYLINDER HOLE IN YOUR BASE IS 2 INCHES WIDE
Office Owl Office Chair Cylinder Replacement Super Bundle (Includes Removal Tool, Gloves an Instructions) Universal Size Heavy Duty Gas Cylinder for Office Chairs. Pneumatic Piston/Hydraulic Piston
$29.95
$38.34
Amazon.com
Last update was on: May 3, 2024 11:34 am
- ✅WHAT'S INSIDE YOUR OFFICE CHAIR CYLINDER SUPER BUNDLE? ! We included literally EVERYTHING you need to replace your office chair gas cylinder easily, quickly and painlessly! Featuring: Printed STEP BY STEP INSTRUCTIONS, premium GLOVES for gripping the cylinder and keeping your hands grease free, and a REMOVAL TOOL for effortless removal of the old cylinder. We included everything you need to revive your ageing office chair!
Katu Office Chair Gas Lift Cylinder Replacement Universal Size – Hydraulic Pneumatic Shock Heavy Duty, 5 Years Warranty. 15.5 Inch, Color Black. Plus Free Gloves.
$14.95
$18.69
Amazon.com
Last update was on: May 3, 2024 11:34 am
- ON THE BOX: 1 pneumatic hydraulic shock office chair gas lift cylinder, 1 pair of gloves.
- HEAVY DUTY: 350 lbs max loading, works on chairs or stools. 5 Year Warranty.
- 5 INCH STROKE, Universal size with a total length of 15.5 inch. Fix most desk chairs, or medical stool (See last image for specific sizes)
- IDEAL: To replace broken office chair gas cylinders on most office chairs and executive chairs.
Heavy Duty 5" Stroke Replacement Office Chair Gas Lift Cylinder Pneumatic Shock – S6111-HD
$24.94
$27.68
Amazon.com
Last update was on: May 3, 2024 11:34 am
- 2" (50mm) wide x 9.25" (235mm) tall center support column (larger diameter black tube) that will fit most chair bases
- 5" piston stroke travel (up & down)
- 16.33" (415mm) total overall extended length (from top to bottom)
- Built to withstand more weight and pressure than standard gas cylinders.
- Heavy Duty replacement for gas lift cylinders on many office chairs and executive chairs, including many purchased at office supply stores
Grace & Grace Professional Gas Lift Cylinder Replacement for Office Chair – Heavy Duty Hydraulic and Pneumatic Shock Universal Size Fit for Most Chairs (200mm)
$15.90
$20.19
Amazon.com
Last update was on: May 3, 2024 11:34 am
- 5% Coupon for BIG Promotion. Heavy Duty Cylinder for 400lbs. Goes up and down smoothly
- Made of quality materials with SGS verification
- Adjusted from 14.9-22.0 inches, higher than normal to make you extra comfort
- Universal size to fit perfectly for most of the executive, computer and desk chairs
- Super easy installation and no tools request. Pls refer to Picture 6/7 or contact us at [email protected] to get short video for the instruction of taking apart the existing cylinder if needed.
Heavy Duty 8" Stroke Replacement Drafting Stool Gas Lift Cylinder Pneumatic Shock – Medium Stool Height – S6115-HD
$39.99
$51.99
Amazon.com
Last update was on: May 3, 2024 11:34 am
- Heavy Duty - Built to withstand more weight and pressure than standard gas cylinders
- 2" (50mm) wide x 12.4" (315mm) tall main support tube column will fit most chair bases (larger diameter black tube)
- 8" piston stroke adjustment range (up & down)
- 22.25" (565mm) total overall extended length
- Ideal to replace gas cylinders on most tall task chairs, drafting chairs, and stools.
BestOffice OC-H03-Black Chair Desk Ergonomic Swivel Executive Adjustable Task MidBack Computer Stool with Arm in Home-Office Mesh Black
$29.99
$44.09
Amazon.com
Last update was on: May 3, 2024 11:34 am
- Easy to install This office chair Super easy to put together. It took maybe 10-15minutes, this desk chair came with all the tools necessary
- High quantity office chair all the parts BIFIMA certification, more reliable and sturdy, this desk chair does include a weight limit of 250 pounds.
- Excellent comfort Comfortable or long use! The office chair is wider than the average desk office chairs. Adjustable Height, the layout of the office chair is great for the back. The locking back helps keep upright. Suggested this to others.
Short Office Chair or Stool Bell Glides – Low Profile – Replacement- (5 Pack) – S0005
noblechairs Very Short Gas Lift Replacement (-30mm)
Size:30mm
The exclusive chairs from noblechairs are definitely a class of their own and combine noble design with the highest quality materials and extremely precise workmanship. During the purely mechanical production process, meticulous attention is paid to ensuring that the latest industrial standards and high quality standards are adhered to.
The noblechairs EPIC series is on its lowest level made users with a size of approx. 1.80 m. Due to the height adjustment of up to 10 cm, the chair is also ideal for even taller people. For users under 1.80 m, however, a shorter gas pressure spring is recommended, as the feet would otherwise not reach the floor comfortably.
With the help of this short version of the gas pressure spring, which is 3.0 cm shorter than the original, even “smaller” users can sit comfortably on a chair from noblechairs.
Perfect for noblechairs EPIC / ICON and HERO series.
Replacement Glide – Low Profile Short Glides for Chairs, Stools, or Tables – Set of 5 – S4342-5
$14.76
$21.99
Amazon.com
Last update was on: May 3, 2024 11:34 am
- 1.50" (42mm) overall width
- 0.70" (17.8mm) glide height (not including mounting stem) - Much shorter than standard office chair casters or glides - Please be sure that your gas cylinder does not extend too far down below your chair base as the glides will have to lift the base high enough to keep the cylinder bottom off the floor.
- Works with many chairs, tables, & furniture that have the standard grip ring stem (size noted below)
Offex OFX-90267-FF High Back Black Leather Executive Office Chair with Triple Paddle Control
$183.17
$221.64
Amazon.com
Last update was on: May 3, 2024 11:34 am
- Overall Dimension: 28''W x 28''D x 42.5'' - 48.75''H. Shipping Weight: 45 Lbs.
- Seat Size: 21''W X 19.5''D. Back Size: 20''W X 26''H.
- Arm-Height From Floor: 26.5 - 32.75''H. Arm-Height From Seat: 7.25 - 10''H. Seat Height: 17.5 - 21''H.
- Assembly Required: No. Color: Black. Finish: Black Nylon.
- Upholstery: Black Leather. Material: Foam, Leather, Steel, Wood. Made in China.
SPACE Seating Big and Tall AirGrid Back and Padded Mesh Seat, Adjustable Arms, Gunmetal Finish Base Ergonomic Managers Chair, Black
$299.84
$329.82
Amazon.com
Last update was on: May 3, 2024 11:34 am
- Double airgrid Back and custom fabric Seat with adjustable lumbar support
- One touch pneumatic Seat Height adjustment
- 2-Way adjustable arms with PU pads
- Gunmetal Finish Base with Dual Wheel Carpet Casters
- Built to accommodate the larger user
- supports up to 400 lbs.
8T8 4" Office Chair Gas Lift Cylinder Replacement, Universal Size Hydraulic Pneumatic Piston Shock (Black 100)
Amazon.com
Last update was on: May 3, 2024 11:34 am
- ✔Heavy Duty: Made of high quality metal construction, Hold the maximum weight over 450 lbs and lift the height to 4 inches, as well as allow for 360 degrees quiet swiveling,support more weight and pressure than original standard gas cylinders
- ✔Universal Standard Size: 2 inch bottom base and 1.1 inch cylinder shaft fit most executive, office, computer and desk chairs
- ✔Easy to Install: Both cylinders' edges are slightly tapered for easily installing, you can use your home repair kits simply to remove the old cylinder and install the new cylinder
Size:100mm
Colors: Black/White
NOTE: We offer 5 sizes and 2 colors of Replacement Gas Lift Cylinders for Universal Standard Size chairs. Please determine what sizes and colors you want before you add to cart.
About the extension of cylinders, please choose product options and refer to the picture description.
Adjustable ranges:
65, 85, 100, 120, 140 mm
( 2.6, 3.5, 4, 4.7, 5.5 inch)
These replacement office chair gas lift cylinders are more heavy duty than standard chair gas lift cylinders.
It is a great replacement option for damaged or worn out gas lifts on office chairs, task chairs, executive chairs.
