Best Stub Length Drill Bit
Best results for stub length drill bit
Neiko 11402A Stubby Drill Bit Set for Metal, 5 Piece | 1/4-Inch Quick Change Hex Shank | M2 HSS Steel
$13.99
$15.53
Amazon.com
Last update was on: November 23, 2024 1:57 pm
- Short bits are constructed of heavy duty, Premium molybdenum M2 high speed steel with evenly distributed carbides for resistance against wear
- 135 Degree standard tip design delivers powerful penetration against metals, plastics and other hard surfaces
- 1/4-inch hex shanks are compatible with standard and quick change chucks and drivers, providing versatility in drilling needs
- Each stubby Bit measures from 1. 9 inches to 2. 32 inches for working in hard-to-reach tight spaces with short and right angle drills
Chicago Latrobe 759 Solid Carbide Short Length Drill Bit, Slow Spiral Flute, Uncoated (Bright) Finish, Round Shank, 135 Degree Split Point, 1/8" Size
$19.30
$27.99
Amazon.com
Last update was on: November 23, 2024 1:57 pm
- Short length drill bit offers rigidity to reduce tool deflection and breakage
- Carbide resists wear better than high-speed or cobalt steel and withstands high speeds
- Uncoated (bright) finish is an untreated surface that can be used on a range of materials
- Self-centering 118-degree 4-facet point provides durability and accuracy to prevent walking and penetrate material more easily than a conventional point
Chicago Latrobe 769 Solid Carbide Short Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degree Converntional Point, 1/8" Size
$16.65
$19.31
Amazon.com
Last update was on: November 23, 2024 1:57 pm
- Straight flutes drill shallow and horizontal holes in cast iron, and non-ferrous and hardened materials
- Carbide resists wear better than high-speed or cobalt steel and withstands high speeds
- Uncoated (bright) finish is an untreated surface that can be used on a range of materials
- Self-centering 140-degree 4-facet point provides strength and high accuracy to penetrate material more easily than a conventional point, and produces small chips to reduce clogging
Chicago Latrobe 559 Cobalt Steel Short Length Drill Bit, Gold Oxide Finish, Round Shank, 135 Degree Split Point, 1/8" Size (Pack of 12)
$29.72
$37.74
Amazon.com
Last update was on: November 23, 2024 1:57 pm
- Short length drill bit offers rigidity to reduce tool deflection and breakage
- Cobalt steel provides extended tool life compared to high-speed steel drill bits when drilling hard materials
- Gold oxide finish lubricates and provides wear resistance on ferrous materials
- 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
- Extra-thick web provides increased strength and rigidity compared to standard drill bits
YG-1 D4107 High Speed Steel Stub Screw Machine Drill Bit, TiN Finish, Straight Shank, Slow Spiral, 135 Degree, 3.3mm Diameter x 49mm Length (Pack of 5)
Drill America 7/16" Cobalt Heavy Duty Split Point Stub Drill Bit (Pack of 6), D/ASTCO Series
$46.39
$57.99
Amazon.com
Last update was on: November 23, 2024 1:57 pm
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools
- performance is similar to uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
Viking Drill and Tool 43690 Type 260-T 135 Degree Split Point Black Heavy Duty Stub Length Drill Bit Set (13 Piece)
$23.73
$34.41
Amazon.com
Last update was on: November 23, 2024 1:57 pm
- 13 pc. Set Screw Machine Length Heavy Duty 135-Degree Split Point
- 1/16 - 1/4 by 64ths, 135-Degree split point
- High speed steel provides good wear resistance, can be used in general purpose applications for ferrous and nonferrous materials
- Black oxide prevents chip building, galling and welding. Commonly used for low carbon, stainless and ferrous metals
- NAS 907C Screw Machine Length
Chicago Latrobe 159 High-Speed Steel Short Length Drill Bit, Black Oxide Finish, Round Shank, 135 Degree Split Point, 1/8" Size (Pack of 12)
$22.56
$32.26
Amazon.com
Last update was on: November 23, 2024 1:57 pm
- Manufactured to NAS 907 Type C geometry aerospace specifications
- Manufactured from premium high-speed steel
- 135 degree P3 split point is self-centering for reduced thrust and easier penetration
- Shorter flute and overall length provide superior rigidity to minimize deflection when using heavy feed rates
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
Milescraft 2320 Metal Stubby Drill Bit Set
$8.76
$12.79
Amazon.com
Last update was on: November 23, 2024 1:57 pm
- 1. 9 to 2. 32-Inch bits allow access to tight spaces
- One piece precision ground from M2 high speed steel for long lasting durability
- 1/4-inch hex shank works with standard and quick change chucks
- 5 piece set of common size drill bits
- 135 Degree standard tip for drilling into metal, plastic, or other materials
Best Choice 8-Piece 1/2” Shank Silver and Deming Drill Bit Set in Aluminum Carry Case, High Speed Steel (HSS) | SAE Size 9/16” – 1” by 1/16th Increment
$26.99
$40.22
Amazon.com
Last update was on: November 23, 2024 1:57 pm
- Premium cobalt high speed steel construction for proven capability and durability to drill holes in wood, plastic, aluminum, copper, stainless, sheet metals and many other types of materials
- Superior gold titanium and black nitride dual coating finish holds up lubricant better for smoother drilling, and is 80% more durable and corrosion resistant than regular black enamel finish
- 135° Split point design at tip increases cutting speed with self-centering feature and prevents drill walking or wobbling
Qualtech 11/32 HSS Heavy Duty Split Point Stub Drill Bit, DWDST11/32
Cobra Carbide 35519 Micro Grain Solid Carbide Stub Length Drill Bit, TiAlN Coated, Round Shank, Slow Spiral Flute, 135 Degrees Split Point, 1/4" Size, 2-1/2" Length (Pack of 1)
$24.94
$36.16
Amazon.com
Last update was on: November 23, 2024 1:57 pm
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant ("dry machining")
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
